POLYMERIC INSULATOR PERFORMANCE TEST UNDER MAGNETIC FIELD EFFECT

Öz

Çevresel ve elektriksel zorlayıcı etkiler enerji iletim dağıtım hattında yaygın olarak kullanılan silikon izolatörlerin yaşlanmasına sebep olurlar ve dielektrik performanslarını azaltırlar. Mekanik olarak taşıma kolaylığı, esnekliği ve hafifliği ile öne çıkan silikon izolatörler aynı zamanda yüksek elektrik direncine de sahiptir. Bu yalıtkanların yapısındaki herhangi bir bozulma, elektrik kesintilerine neden olarak ciddi finansal kayıplara yol açabilir. Enerji iletim-dağıtım hattı boyunca izolatörlerde, tellerden geçen akımın ürettiği manyetik alanın etkisi vardır. Bu alan, yalıtkan üzerindeki çalışma performansını değiştirecek bir etkiye neden olabilir. Bu çalışmada, silikon izolatörlerin çalışma performansını etkileyen AC manyetik alan, eğik düzlem testinde IEC 60587 ve ASTM 2303 standartlarına göre incelenmiştir. Ek olarak, üretilen bir elektrik alan ve kapasitif etki test edilmiştir. Numunelerin test süreleri, yalıtkan yüzeyinde üst elektrottan toprak elektroduna akan kaçak akım ve yüzey koşulları incelenmiş ve sonuçlar karşılaştırılmıştır.

Anahtar Kelimeler

• Mineral yağ,pressboard,kısmi deşarj,dielektrik,yüzey bozulması

POLYMERIC INSULATOR PERFORMANCE TEST UNDER MAGNETIC FIELD EFFECT

Öz

The environmental and electrical stresses age silicone insulators commonly used in energy transmission-distribution line and reduce their performance. Silicon insulators, which stand out mechanically with their ease of transportation, flexibility and light weight, have high electrical resistance as well. Any deterioration in the structure of these insulators can lead to power outages, causing serious financial loss. On the insulators along the energy transmission-distribution line there is the effect of the magnetic field generated by the current passing through the wires. This field can cause such an effect that will change the working performance on the insulator. In this study, AC magnetic field effecting the working performance of silicon insulators was examined in inclined plane test according to IEC 60587 and ASTM 2303 standards. In addition, an electric field generated and the capacitive effect were tested. Test times of samples, leakage current which flows on the surface of insulator from top electrode to the earth electrode, and surface conditions were examined and results were compared.

Anahtar Kelimeler

• Mineral oil,pressboard,partial discharge,dielectric,surface degradation

Kaynakça

1. [1] Malik, N. H., Al-Arainy, A. A., & Qureshi, M. I. (1998). Electrical Insulation in Power Systems. Marcel Dekker Inc, New York, 394.
2. [2] Shugg, W. T. (1995). Handbook of Electrical and Electronic Insulating Materials 2. edition. IEEE Press, New Jersey, 578.
3. [3] Gallagher, T. J., & Pearmain, A. J. (1983). High Voltage Measurement Testing and Design. Chichester: Wiley, Michigan, 245.
4. [4] Mills, D. H., Lewin, P. L., & Chen, G. (2011). Ageing of High Voltage Cable İnsulation. Electrical Insulation Conference (EIC), 5-8 June 2011, Annapolis, MD, USA, 439-443.
5. [5] Vas J.M., & Thomas M. J. (2014). Surface Degradation of Silicone Rubber Nanocomposites Due to DC Corona Discharge. IEEE Transactions on Dielectrics and Electrical Insulation, 21(3), 1175-1182.
6. [6] Kumar R., & Gupta N. (2015). Tracking and Surface Degradation of Barium Titanate filled Silicone Rubber Nanocomposites. Electrical Insulation and Dielectric Phenomena (CEIDP) IEEE Conference, 18-21 October 2015, Ann Arbor, MI, USA, 495-498.
7. [7] Tokoro T. (2016). Effects of Temperature and Surface Roughness on the Evaluation of Hydrophobic Properties of Silicone Rubber. Electrical Insulation and Dielectric Phenomena (CEIDP) IEEE Conference, 16-19 October 2016, Toronto, ON, Canada, 814-817.
8. [8] Çelik A., İspirli M. M., & Ersoy Yılmaz A. (2018). An Experimental Study on Ultraviolet Effect on Silicone-Rubber Isolators. 3rd International Conference on Engineering Technology and Applied Sciences (ICETAS), 17-21 July 2018, Skopje, Macedonia, 261-265.

9. [9] Han X., & Wenfang S. (2014). Polymer/SiO2 Hybrid Nanocomposites Prepared Through the Photoinitiator-Free UV Curing and Sol–Gel Processes. Composites Science and Technology, 93, 90-96.
10. [10] ASTM (American Society for Testing and Materials Standard) (1997) ASTM 2303: Guide for Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials. West Conshohocken, PA.
11. [11] IEC (International Electrotechnical Commission) (2007) IEC 60587: Standard Guide for electrical insulating materials used under severe ambient conditions – Test methods for evaluating resistance to tracking and erosion. Geneva 20 – Switzerland.
12. [12] Ahmadi-Joneidi I., Majzoobi A., Shayegani-Akmal A.A., & Mohseni H. (2013). Aging Evaluation of Silicone Rubber Insulators Using Leakage Current and Flashover Voltage Analysis. IEEE Transactions on Dielectrics and Electrical Insulation, 20(1), 212-220.
13. [13] Muhamedin F.L, Piah M., & Othman N.A. (2015). Modelling on Tracking Test Condition of Polymer Nanocomposite Using Finite Element Simulation. TELKOMNIKA Telecommunication, Computing, Electronics and Control, 13(4), 1194-1203.
14. [14] Dutta M., & Dwivedi C.K. (2010) Liquid-Contaminant: Inclined Plane Tracking and Erosion of Insulating Materials. 3rd International Conference on Emerging Trends in Engineering and Technology, 19-21 November 2010, Goa, India, 235-240.
15. [15] Jahromi A.N., El-Hag A.H., Jayaram S.H., Cherney E.A., Sanaye-Pasand M., & Mohseni H. (2005). Effect of Acid Immersion on RTV Silicone Rubber Coatings in Inclined Plane Tests. Annual Report Conference on Electrical Insulation and Dielectric Phenomena, 16-19 October 2005, Nashville, TN, USA, USA, 313-316.
16. [16] Nazir M.T., Phung B.T., & Li S. (2017). Erosion Resistance of Micro-AlN and Nano-SiO2 Hybrid Filled Silicone Rubber Composites, International Symposium on Electrical Insulating Materials (ISEIM), 11-15 September 2017, Toyohashi, Japan, 370-373.