Simultaneous Monitoring and Control of Automation Systems with SCADA Based PLC

Öz

As technology develops all over the word, it is desired to be more efficient and less costly, and automatic control systems are demanded accordingly. The most important duties of the elements that constitute the automatic control system are quality of the established system and being cheap and functional. SCADA and PLC control systems, which are among the significant control systems, are utilized to implement these conditions placed against the elements. SCADA and PLC systems are automatic control systems that are very popular today. Both of them are used in almost every field of industry. This study has been implemented in the Academy automation R&D laboratory and applications have been developed with PLC and SCADA, which are indispensable for automation systems. All systems are connected to SCADA using 3 types of PLC, S7-300, S7-1200, S7-1500 and also MODBUS devices. These four systems transferred to SCADA are monitored on a screen. At the same time, the feature of being able to intervene in the system in case of malfunction, which is one of the important advantages of the SCADA system, has also been used.

Anahtar Kelimeler

• Control systems
• PLC
• modbus systems
• SCADA system

Otomasyon Sistemlerinin SCADA Tabanlı PLC ile Aynı Anda İzlenmesi ve Kontrolü

Öz

Teknoloji geliştikçe, dünyanın her yerinde daha verimli ve daha az maliyetli olması istenmekte ve buna uygun otomatik kontrol sistemleri talep edilmektedir. Otomatik kontrol sistemini oluşturan unsurların en önemli görevi, kurulan sistemin kaliteli, ucuz ve işlevsel olmasıdır. Önemli kontrol sistemleri arasında yer alan SCADA ve PLC kontrol sistemleri, bu isteklere karşı, bu koşulları gerçekleştirmek için kullanılmaktadır. SCADA ve PLC sistemleri, günümüzde oldukça popüler olan otomatik kontrol sistemleridir. Her ikisi de endüstrinin hemen hemen her alanında kullanılmaktadır. Bu çalışma Akademi otomasyon Ar-Ge laboratuvarında gerçekleştirilmiş ve otomasyon sistemlerinin vazgeçilmezi olan PLC ve SCADA ile uygulamalar geliştirilmiştir. Tüm sistemler 3 tip PLC, S7-300, S7-1200, S7-1500 ve ayrıca MODBUS cihazları kullanılarak SCADA'ya bağlanmış. SCADA'ya aktarılan bu dört sistem bir ekran üzerinden izlenmiştir. Aynı zamanda SCADA sisteminin önemli avantajlarından biri olan, arıza durumunda sisteme müdahale edilebilmesi özelliği de kullanılmıştır.

Anahtar Kelimeler

• Kontrol sistemleri
• PLC
• modbus cihazı
• SCADA Sistemi

Kaynakça

1. Selek, A. (2020).“What is PLC?”, https://www.endustri40.com/tia-portal-nedir, (Visit date: 20 September 2020).
2. Sechen, H.İ. (2014). “The future of PLC”,https://www.elektrikport.com/teknik-kutuphane/siemens-plc-teknolojileri/12311#ad-image-0, Visit date: 15 September 2020.
3. Brodzik, R. (2014). “History of PLC”, https://www.controleng.com/articles/inside-the-competition-for-the-first-plc/, Visit date: 18 September 2020.
4. Thomas, M.S., Kumar, P., & Chandna, V.K. (2004). “Design, development, and commissioning of a supervisory control and data acquisition (SCADA) laboratory for researc hand training” IEEE transactions on PowerSystem, Vol.19, No. 3, pages 1582- 1588.
5. Eminoglu, Y. (2016). “PLC Programming and S7 300/400”, Birsen Publication, Istanbul, ISBN: 978-975-511-550-4.
6. Demi̇r, D., Tepe, C., &Emi̇noğlu, İ. (2019). “Experimental setup for AC motor speed control by using PLC”,Journal of Scientific Perspectives, 3 (3) , 177-188. DOI: 10.26900/jsp.3.018.
7. Gajbhiye, Y.Y.,Pjagtap, P., &Helonde, J.B. (2014). “Labviewstudy of electrical power distribution system by using Simatic S7-300 PLC system”, IJRET: International Journal of Research in Engineering and Technology, 3(4): 143-150.
8. Demirci, A. (2012). “SCADA implementation on PLC based experimental sets in the laboratorysetting”, M.Sc., Marmara University, Institute of Science.

9. Kaur, K., & Kaur, R. (2014). “Energy management system using PLC and SCADA”, International Journal of Engineering Research & Technology (IJERT), 3(11): 528-531.
10. Eminoglu, Y. (2017). “PLC Programming and S7 1200, Programming and S7 300/400”, Birsen Publication, Istanbul, ISBN: 978-975-511-588-7.
11. Kayri, İ. (2003). “Controlling the temperature value of medium by using programmable logic controller”, M.Sc., Yuzuncu Yil University, Institute of Science.
12. Irmak, E., Erkek, İ., & Özçeli̇k, M. (2017). “Experimental analysis of the internal attacks on SCADA systems”, Gazi University Journal of Science, 30 (4) , 216-230.
13. Eminoğlu, Y. (2016). “Operator Panel with TIA portal & SCADA programming”, Birsen Publication, İstanbul, ISBN: 978-975-511-649-5.
14. Li̇shev, S., Popov, R., & Georgiev, A. (2015). “Laboratuvar SCADA sistemleri - Son teknoloji ve zorluklar”, Balkan Elektrik ve Bilgisayar Mühendisliği Dergisi, 3 (3), 164-170.
15. Şi̇mşek, M., & Özen, M, F. (2019). “Realization of a building automation system using PLC and SCADA”, International Journal of Engineering and Innovative Research, 1 (1), 28-34.
16. Dorjee, R.G. (2014). “Monitoring and control of a variable frequency drive using PLC and SCADA”, International Journal on Recent and Innovation Trends in Computing and Communication ISSN: 2321-8169 Volume: 2 Issue: 10.
17. Üstünsoy, F., & Sayan, H.H. (2018), “PLC destekli SCADA ile enerji yönetimi için örnek laboratuvar çalışması”, Politeknik Dergisi, 21(4), 1007-1014.