Investigation on the Production of Solution Strengthened Ductile Iron Part Grade 500-14

Yıl 2020, Cilt: 3 Sayı: 1, 41 - 45, 30.06.2020

Soner Özden Erturk , Ahmet Ozel

Öz

The aim of this study is investigating a new possibility instead of EN GJS 500-7 material. The new possibility is solution strenghted ductile iron EN GJS 500-14 with higher yield strength, higher elongation, low weight and low cost advantages. For the selected composition, whole mechanical and microstructural properties has been achieved. The thermal analyses and the computer simulation has been studied. Results showed good correlation between real casting results and computer simulation. Finally, EN GJS 500-14 casting material is replaceable for 500-7 in certain conditions; tensile, hardness, elongation and yield strength requirements.
Keywords; solution strenghted ductile iron, casting simulation, thermal analyses

Anahtar Kelimeler

katı çözelti sertleşmesi, , sfero dökme demirler, döküm simülasyonu, termal analiz

INVESTIGATION ON THE PRODUCTION OF SOLUTION STRENGHTED DUCTILE IRON PART GRADE 500-14

Öz

The aim of this study is investigating a new possibility instead of EN GJS 500-7 material. The new possibility is solution strenghted ductile iron EN GJS 500-14 with higher yield strength, higher elongation, low weight and low cost advantages. For the selected composition, whole mechanical and microstructural properties has been achieved. The thermal analyses and the computer simulation has been studied. Results showed good correlation between real casting results and computer simulation. Finally, EN GJS 500-14 casting material is replaceable for 500-7 in certain conditions; tensile, hardness, elongation and yield strength requirements.

Anahtar Kelimeler

solution strenghted ductile iron, casting simulation, thermal analyses

Kaynakça

• Herfurth, K., Gorski, R., Beute, K., Hering, M. (2011). GOPAG C 500 F,Gontermann-Peipers, Germany.
• Larker R. Solution strengthened ferritic ductile iron ISO 1083/JS/500-10 provides superior consistent proper-ties in hydraulic rotators. Chin Foundry. 2009;6(4):343–351.
• Takuo Umetani, Hiroyoshi Takada, Tomohiro Ikeda, Tomiko Yamaguchi,Hidenori Era & Kazumasa Nishio (2015) Transformation process of weld heat-affected zone in solution-strengthened ferritic ductile cast iron, Welding International, 29:5, 342-348, DOI:10.1080/09507116.2014.921063.
• Wolfram Stets, Herbert Löblich, Gert Gassner, Peter Schumacher, Solution Strengthened Ferritic Ductile Cast Iron Properties, Production And Application, Interna-tional Journal of Metalcasting/Volume 8, Issue 2, 2014
• DIN EN 1563: 2012-03: Gusseisen mit Kugelgraphit (2012). (German Institute for Standardization Deutsches Institut fur Normung)