In this study, prototype thigh (femur) bone was brought to 3D point cloud surface format by
using optical scanning system and OPTOCAT program in the first stage, and 3D CAD model
format by using RapidForm XOR program in second stage. In this sense, the aim of the study is
to facilitate the implantation of prosthetic parts by creating femur and tibia bone cuttings for the
planned operation and to increase the success rate in the use of customized products.
Bu
çalışmada Prototip uyluk (femur)
kemiği birinci aşamada temassız veri toplama yöntemlerinden optik tarama
sistemi ile OPTOCAT programından faydalanılarak 3B nokta bulutu yüzey
formatına, ikinci aşamada RapidForm XOR programı kullanılarak 3B CAD model
formatına getirildi. Bu
anlamda çalışmanın amacı, planlanan operasyon için femur ve tibia kemik
kesileri oluşturularak protez parçalarının takılma aşamaları kolaylaştırmak ve
kişiye özel üretimlerin kullanımlarında başarı oranını artırmaktır.
Birincil Dil | Türkçe |
---|---|
Konular | Makine Mühendisliği |
Bölüm | Makaleler |
Yazarlar | |
Yayımlanma Tarihi | 30 Haziran 2019 |
Gönderilme Tarihi | 21 Şubat 2019 |
Kabul Tarihi | 5 Temmuz 2019 |
Yayımlandığı Sayı | Yıl 2019 Cilt: 9 Sayı: 1 |