The Thermal Performance of The Plate-fin Heat Sink under Natural Convection at Different Power Levels and Ambient Temperatures

Öz

The thermal performance of a flat heat sink and a plate-fin heat sink was experimentally compared under natural convection conditions at thermal powers of 16.5 W and 33 W and ambient temperatures of 30°C and 40°C. For the same heating powers, surface and junction temperatures increased as the ambient temperature rose from 30°C to 40°C, but the increase was not as much as the ambient temperature change. For the flat heat sink, the increase in junction temperature was 5°C at 16.5 W and 6.68°C at 33 W. For the plate-fin heat sink, the increase in junction temperature was 3.55°C at 16.5 W and 4.47°C at 33 W. The increase in surface temperature for the flat heat sink was 5.35°C at 16.5 W and 5.91°C at 33 W, while for the plate-fin heat sink, the surface temperature increase was 4.76°C at 16.5 W and 2.22°C at 33 W. The thermal resistance of the flat heat sink was around 4 K/W, while for the plate-fin heat sink, it ranged between 2-2.5 K/W, providing approximately twice the advantage in thermal resistance for the plate-fin model compared to the flat model. Under all conditions, the Rayleigh number (Ra) significantly decreased with the increase in ambient temperature but increased with the applied thermal power. Thus, the increase in Rayleigh number with power was more pronounced in the plate-fin model, indicating a more significant effect. In the plate-fin model, the fin efficiency slightly decreased with the increase in ambient temperature, from 0.63 to 0.62 at 16.5 W and from 0.65 to 0.64 at 33 W.

Anahtar Kelimeler

• heat sink
• plate-fin
• natural convection
• ambient temperature
• power

Kaynakça

1. [1]. Khattak, Z., Ali, H. M. 2019. Air cooled heat sink geometries subjected to forced flow: A critical review. International Journal of Heat and Mass Transfer, 130: 141-161.
2. [2]. Doğan, M., Doğan, D. 2017. Experimental investigation of natural convection heat transfer from fin arrays for different tip-to-base fin spacing ratios. Isı Bilimi ve Tekniği Dergisi, 37(1): 147-157.
3. [3]. Haghighi, S. S., Goshayeshi, H. R., Safaei, M. R. 2018. Natural convection heat transfer enhancement in new designs of plate-fin based heat sinks. International Journal of Heat and Mass Transfer, 125: 640-647.
4. [4]. Shen, Q., Sun, D., Xu, Y., Jin, T., Zhao, X. 2014. Orientation effects on natural convection heat dissipation of rectangular fin heat sinks mounted on LEDs. International Journal of heat and mass transfer, 75: 462-469.
5. [5]. Şevik, S., Özdilli, Ö. Study of the effect of fin geometry on the performance of a plate-fin heat sink, In 2nd International African Conference on Current Studies of Science, Technology Social Sciences, Abuja, Nigeria, 2020 pp 315-328.
6. [6]. Özdilli, Ö., Şevik, S. 2021. Effect of channel and fin geometries on a trapeze plate-fin heat sink performance. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 235(5): 1326-1336.
7. [7]. Yalçın, B. 2015. Soğutucu Plakalarda Yüzey Geometrisinin ve Kanatçık Sayısının Isı İletimine Etkisinin Sonlu Eleman Analizi İle Araştırılması. Uluslararası Teknolojik Bilimler Dergisi, 7(3): 27-39.
8. [8]. Feng, S., Shi, M., Yan, H., Sun, S., Li, F., Lu, T. J. 2018. Natural convection in a cross-fin heat sink. Applied Thermal Engineering, 132: 30-37.

9. [9]. Banerjee, B., Chattrejee, S., Das, S., Datta, J. 2022. Steady State Free Convection through some Variable Fin Geometries. YMER 21(7): 952-959.
10. [10]. Altun, A. H., Ziylan, O. (2019). Experimental investigation of the effects of horizontally oriented vertical sinusoidal wavy fins on heat transfer performance in case of natural convection. International Journal of Heat and Mass Transfer, 139: 425-431.
11. [11]. Charles, R., Wang, C. C. (2014). A novel heat dissipation fin design applicable for natural convection augmentation. International Communications in Heat and Mass Transfer, 59: 24-29.
12. [12]. Do, K. H., Kim, T. H., Han, Y. S., Choi, B. I., Kim, M. B. (2012). General correlation of a natural convective heat sink with plate-fins for high concentrating photovoltaic module cooling. Solar Energy, 86(9): 2725-2734.
13. [13]. Çorumlu, V. (2024). The effects of input power and ambient temperature on the thermal performance of conical pin fin heat sink in natural convection. International Journal of Thermal Sciences, 197, 108855.