Araştırma Makalesi

Doku Fantom Üretimi ve Temel Optik Özelliklerinin Ölçümü / Fabrication of Tissue Phantom and Measurement of The Fundamental Optical Properties

Cilt: 13 Sayı: 1 30 Mart 2017
  • İbrahim Akkaya
  • Mehmet Engin
  • Yavuz Öztürk
PDF İndir
EN

Doku Fantom Üretimi ve Temel Optik Özelliklerinin Ölçümü / Fabrication of Tissue Phantom and Measurement of The Fundamental Optical Properties

Öz

Bu çalışmada, insan dokusu optik parametrelerinin ölçülebilmesi için gerekli olan doku benzeri katı fantom tasarımının yapımı gerçekleştirilmiştir. Taban malzeme olarak silikon bazlı Polydimethlysiloxane (PDMS), soğrulma özelliği için Hint mürekkebi ve saçılma özelliği için ise titanyumdioksit (TiO2) kullanılmıştır. Hazırlanan katı fantomların optik özellikleri, tek toplayıcı küre optik düzeneği tabanlı, Ters Ekleme Katlama yöntemi kullanılarak hesaplanmıştır. Ölçümler, lisanslı referans fantom ile karşılaştırılmış ve karesel ortalama hatası 0.07’den az bulunmuştur. Fantoma ilişkin değerler; 633 nm dalgaboyu için; soğrulma katsayısı 0.22 cm-1, indirgenmiş saçılma katsayısı 10.6 cm-1 olarak bulunmuştur. Bu değerler literatürdeki insan dokusu değerleri ile de örtüşmektedir. Ayrıca istenilen optik özellikte ve şekillerde fantom yapılabileceğine ait veriler paylaşılmıştır.

In this study, tissue like solid phantom was fabricated for being able to measure the human tissue optical parameters. It was used Polydimethlysiloxane (PDMS) as a basement material, Indian ink as an absorption, and titaniumdioxide (TiO2) powder as a scattering agent. The optical characteristics of prepared solid phantoms were calculated by Inverse Adding Doubling method via based on single integrating sphere setup. The measurement results were compared with licensed reference phantom and the mean squared error was found less than 0.07. The fabricated phantom optical parameters are found absorption coefficient 0.22 cm-1, reduced scattering coefficient 10.6 cm-1 at 633 nm. In addition, some results have been showed for making optional solid phantoms.


Anahtar Kelimeler

Kaynakça

  1. [1] Tuchin V. V., Tissue Optics And Photonics: Light Tissue Interaciton, J. Biomedical Photonics & Eng., 2015; 1(2), 98 – 134.

Ayrıntılar

Birincil Dil

İngilizce

Konular

Mühendislik

Bölüm

Araştırma Makalesi

Yazarlar

İbrahim Akkaya Bu kişi benim

Mehmet Engin Bu kişi benim

Yavuz Öztürk Bu kişi benim

Yayımlanma Tarihi

30 Mart 2017

Gönderilme Tarihi

26 Ağustos 2016

Kabul Tarihi

-

Yayımlandığı Sayı

Yıl 2017 Cilt: 13 Sayı: 1

Kaynak Göster

APA
Akkaya, İ., Engin, M., & Öztürk, Y. (2017). Doku Fantom Üretimi ve Temel Optik Özelliklerinin Ölçümü / Fabrication of Tissue Phantom and Measurement of The Fundamental Optical Properties. Celal Bayar University Journal of Science, 13(1), 205-209. https://doi.org/10.18466/cbayarfbe.302656
AMA
1.Akkaya İ, Engin M, Öztürk Y. Doku Fantom Üretimi ve Temel Optik Özelliklerinin Ölçümü / Fabrication of Tissue Phantom and Measurement of The Fundamental Optical Properties. Celal Bayar University Journal of Science. 2017;13(1):205-209. doi:10.18466/cbayarfbe.302656
Chicago
Akkaya, İbrahim, Mehmet Engin, ve Yavuz Öztürk. 2017. “Doku Fantom Üretimi ve Temel Optik Özelliklerinin Ölçümü / Fabrication of Tissue Phantom and Measurement of The Fundamental Optical Properties”. Celal Bayar University Journal of Science 13 (1): 205-9. https://doi.org/10.18466/cbayarfbe.302656.
EndNote
Akkaya İ, Engin M, Öztürk Y (01 Mart 2017) Doku Fantom Üretimi ve Temel Optik Özelliklerinin Ölçümü / Fabrication of Tissue Phantom and Measurement of The Fundamental Optical Properties. Celal Bayar University Journal of Science 13 1 205–209.
IEEE
[1]İ. Akkaya, M. Engin, ve Y. Öztürk, “Doku Fantom Üretimi ve Temel Optik Özelliklerinin Ölçümü / Fabrication of Tissue Phantom and Measurement of The Fundamental Optical Properties”, Celal Bayar University Journal of Science, c. 13, sy 1, ss. 205–209, Mar. 2017, doi: 10.18466/cbayarfbe.302656.
ISNAD
Akkaya, İbrahim - Engin, Mehmet - Öztürk, Yavuz. “Doku Fantom Üretimi ve Temel Optik Özelliklerinin Ölçümü / Fabrication of Tissue Phantom and Measurement of The Fundamental Optical Properties”. Celal Bayar University Journal of Science 13/1 (01 Mart 2017): 205-209. https://doi.org/10.18466/cbayarfbe.302656.
JAMA
1.Akkaya İ, Engin M, Öztürk Y. Doku Fantom Üretimi ve Temel Optik Özelliklerinin Ölçümü / Fabrication of Tissue Phantom and Measurement of The Fundamental Optical Properties. Celal Bayar University Journal of Science. 2017;13:205–209.
MLA
Akkaya, İbrahim, vd. “Doku Fantom Üretimi ve Temel Optik Özelliklerinin Ölçümü / Fabrication of Tissue Phantom and Measurement of The Fundamental Optical Properties”. Celal Bayar University Journal of Science, c. 13, sy 1, Mart 2017, ss. 205-9, doi:10.18466/cbayarfbe.302656.
Vancouver
1.İbrahim Akkaya, Mehmet Engin, Yavuz Öztürk. Doku Fantom Üretimi ve Temel Optik Özelliklerinin Ölçümü / Fabrication of Tissue Phantom and Measurement of The Fundamental Optical Properties. Celal Bayar University Journal of Science. 01 Mart 2017;13(1):205-9. doi:10.18466/cbayarfbe.302656