The Fabrication of Local Piezoelectric Sensors Using Hydraulic Pressing System Based on PLC

Öz

In this study, the local PZT-PVDF composite sensors are produced. The PLC based hydraulic pressure system (250kgF) is as specially designed and fabricated to produce these sensors. The composite sensors are threated under pooling condition in silicon oil at 30 minutes, 120^oC.  Frequency-voltage charactrestics of the piezoelectric sensor that integrated on vibration measurement system are defined, in addition d₃₃ (piezoelectric coefficient), capacitance (C), and Q_m (mechanical quality factor) values are determined. It is seen that, fabricated these sensors have 2.5 to 3.7 V_pp (pick to pick) voltage at 10Hz resonance frequency. d₃₃ and Q_m values of the mentioned sensors are characterized as 10.5-8.6 , 3.7-2.5, respectively. In lower frequency, these sensors which have maximum 3.7 V_pp voltage may use as strain sensor, vibration sensor, atomic force microscope cantilever piezoelectric sensor, etc. For the first time, the local piezoelectric sensors are fabricated, and PLC based hydraulic pressure system is designed to produce them in Turkey.

Anahtar Kelimeler

• Fabrication,Hydraulic Pressure,PLC,Piezoelectric Sensor

Kaynakça

1. 1. Zak, A.K., Gan, W.C., AbdMajid, W.H., Darroudi, M., Ve-layutham, T.S.; Experimental and theoretical dielectric studies of PVDF/PZT nanocomposite thin films, Ceramics International, 2011; 37(5) 1653–1660.
2. 2. Jain, A., Prashanth, K.J., Sharma, A.K.R., ArpitJain, P.N.; Die-lectric and Piezoelectric Properties of PVDF/PZT Composites: A Review. Polymer Engineering and Science, 2015; 55(7) 1-28.
3. 3. Chu, S.Y., Chen, T.Y., Tsai, I.T., Water, W.; Doping effects of Nb additives on the piezoelectric and dielectric properties of PZT ceramics and its application on SAW device, Sensors and Actuators A, 2004; 113 198–203.
4. 4. Bagirov, M.A., Nuraliev, N.A. Nuraliev and Kurbanov, M.A.; Soviet Physics-Technical Physics, 1972; 17 495-498.
5. 5. Yun, J.S., Park, C.K., Jeong, Y.H., et al. The Fabrication and Characterization of Piezoelectric PZT/PVDF Electrospun Nanofiber Composites, Nanomaterials and Nanotechnology, 2016; 6 20.
6. 6. Huang, H.H., Chen, K.S., Design, analysis, and experimental studies of a novel PVDF-based piezoelectric energy harvester with beating mechanisms, Sensors and Actuators A-Physical, 2016; 238 317-328.
7. 7. Gaur, A.M., Rana, D.S., Dispersion relations for SH waves propagation in a porous piezoelectric (PZT-PVDF) composite structure, Acta Mechanica, 2015; 226 12 4017-4029.
8. 8. Jain, A., Prashanth, K.J., Sharma, A.K., et al. Dielectric and piezoelectric properties of PVDF/PZT composites: A review, Poly-mer Engineering and Science, 2015; 55 7 1589-1616.

9. 9. Tiwari, V., Srivastava, G., Structural, dielectric and piezoelectric properties of 0-3 PZT/PVDF composites, Ceramics International, 2015; 41 6 8008-8013.
10. 10. Jaitanong, N., Yimnirun, R., Zeng, H.R., et al. Piezoelectric properties of cement based/PVDF/PZT composites, Materials Let-ters, 2014; 130 146-149.
11. 11. Li, R., Zhang, L., Shi, Z., Pei, J., Effects of Coupling Agents on the Structure and Electrical Properties of PZT-Poly (VinylideneFlu-oride) Composites, Applied Sciences-Basel, 2016; 6 10 282.
12. 12. Tiwari, V., Srivastava, G., Enhanced dielectric and piezoelectric properties of 0-3 PZT/PVDF composites, Journal of Polymer Re-search, 2016; 23 3 38.
13. 13. Sodano, H.A., Inman, D.J., Park, G., A review of power har-vesting from vibration using piezoelectric materials. Shock and Vibration Diggest, 2004; 36 197–205.
14. 14. Bowen, C.R., Kim, H.A., Weaver, P.M., Dunn, S., Piezoelectric and ferroelectric materials and structures for energy harvesting applications. Energy and Environmental Science, 2014; 7 25–44.
15. 15. Gad-el-Hak, M., MEMS: Design and Fabrication, CRC Press Inc., London, UK, 2005.
16. 16. Walters, R.B., Hydraulic and electric-hydraulic control systems, Springer, 2000.
17. 17. De Volder, M., Ceyssens, F., Reynaerts, D., and Puers, R., De-sign and characterisation of a hydraulic micro actuator fabricated by lithography, in Micro Electro Mechanical Systems, 2009. MEMS 2009. IEEE 22nd International Conference on, 2009; 451-454.
18. 18. Adenuga, O.T., and Mpofu, K., Control system for electrohy-draulic synchronization on RBPT, 47Th CIRP Conference on Man-ufacturing, 2014.
19. 19. Chabok, H., Zhou, C., Chen, Y., Eskandarinazhad, A., Zhou, Q., and Shung, K., Ultrasound Transducer Array Fabrication Based on Additive Manufacturing of Piezocomposites, ASME/ISCIE International Symposium of Flexible Automation, 2012.