BibTex RIS Kaynak Göster

AA6061 Alaşımının İki Farklı Dolgu Teli Kullanılarak TIG Kaynağında Özelliklerin İncelenmesi - The Investigation of Properties in TIG Welding with Two Different Filler Wire of AA 6061

Yıl 2015, Cilt: 11 Sayı: 2, 0 - , 18.12.2015

Öz

AA6061 Alaşımının İki Farklı Dolgu Teli Kullanılarak TIG Kaynağında Özelliklerin İncelenmesi

Bu çalışmada AA6061 alüminyum malzemeler, ER 5356 ve ER 4043 dolgu teli kullanılarak TIG kaynak yöntemiyle alın alına birleştirilmiştir. Kullanılan dolgu tellerin kaynağa etkileri, radyografik testler, çekme testi, sertlik ölçümleri ve mikro yapı görüntüleri ile incelenmiştir.Sonuçlarda; farklı kaynak dolgu telleri ile kaynakların radyografik film görüntülerinde belirgin bir kusura rastlanmamıştır. Kaynak kök ve dolgu pasolarında çatlak oluşumuna karşı dolgu telinin standartlara uygun olduğu tespit edilmiştir. Numunelere uygulanan çekme deneylerinde ve sertlik ölçümlerinde kullanılan dolgu tele bağlı olarak değişimler belirlenmiştir. Kırılma bölgesi ve yüzeyler incelendiğinde kaynak bölgesinden olmayan sünek kırılma görülmüştür. Çekme deneyi sonuçlarında, ER 5356 dolgu telli numunelerin çekme ve kopma dayanımının da ER 4043 dolgu teli ile yapılan kaynaktan daha iyi olduğu elde edilmiştir. İçyapı incelemelerinde, özellikle ER4043 dolgu teli kullanılan numunelerde, dentritik yapı belirgin olarak görülmüştür.

The Investigation of Properties in TIG Welding with Two Different Filler Wire of AA 6061

In this study, AA6061 aluminium was applied by butt welding using GTAW welding wire ER5356 and ER4043. The effects of the welding wire used radiographic tests, tensile test, hardness measurements and microstructure images were examined.

In results, different welding wire is displayed as radiographic not affect the form of the welding seam. Some sections of root weld in details were determined as the partial irregularity. Depending on the wire used for the tensile test and hardness testing of changes applied to the sample is determined. Ductile fracture was seen when examined the fracture surfaces. The tensile test results, ER5356 electrode and the tensile breaking strength of the sample was obtained from sources which is better than with ER 4043 wire. Internal investigations in construction, especially ER4043 wire used samples dendritic structure were found to be significant


Kaynakça

  • Khotiyan S.K.; Kumar S. Investigation of microstructure and mechanical properties of TIG and MIG welding using aluminium alloy, International Journal of Education and Research Review, 2014; 1(5), 90-96.
  • Maisonnette D.; Wsuery M.; Nelias D.; Chauder P.; Epicier T. Effects of heat treatments on the microstructure and mechanical properties of a 6061 aluminium alloy, Material Science and Engineering A 2011; 528, 2718-2724.
  • Prakash J; Tewari S.P; Srivastava B.K. Shielding gas for welding of aluminium alloys by TIG/MIG welding A review, International Journal of Modern Engineering Research (JMER), 2012; 1, 690-699.
  • Kumar A; Gautam S.S; Kumar A. Heat input and joint efficiency of three welding processes TIG, MIG and FSW using AA6061, International Journal of Mechanical Engineering and Robotics Research, 2014; 1; 89-94.
  • Verna R.P; Pandey K.N. Investigation of fatigue life of 6061-T6 and 5083-O aluminium alloys welded by two welding processes manual metal arc welding and metal inert gas welding, International conference on mechanical and industrial engineering (ICMIE)-9th , 2012.
  • Köksal N.S.; Türkmen İ.; Yalçın H. Farklı metallerde TIG kaynağının mekanik özelliklere etkisinin deneysel ve teorik olarak incelenmesi, 2nd International Conference on Welding Technologies and Exhibition, ICWET’12, 23-25 May, Ankara-Turkey, 529-538, 2012.
  • Volpone L.M.; Mueller S. Joints in Light Alloys Today: The Boundaries of Possibility, Welding International, 2008; 22 (9), 597-609.
  • Sivashanmugam M.; Jothi S.; Kumar T.; Sathishkumar M., Investigation of Microstructure and Mechanical Properties of GTAW and GMAW joints on AA7075 Aluminium Alloy, Frontiers in Automobile and Mechanical Engineering (FAME), 2010, 241-246.
  • Kaluç E. Kaynak Teknolojisi El Kitabı, MMO, Cilt 1, Kocaeli, 2004; 56 pp.
  • Mathers G. The Welding of Aluminium and Its Alloys Today, Woodhead Publishing Ltd, Cambridge, UK, 2002; 84 pp.
  • Durgutlu A. Aluminyum TIG Kaynağında Argon-Hidrojen Gaz Karışımının Mikroyapı ve Mekanik Özelliklere Etkisi, Gazi Üniversitesi Teknik Eğitim Fakültesi Politeknik Dergisi, 2007; 10 (3), 271-276.
  • Lincolnelectric aluminium consumables page, http: //www.lincolnelectric.com/en-us/consumables/ aluminum–mig-tig/Pages/aluminum– mig - tig.aspx, 28.04.2015.
  • Liu Y.; Wang W.; Xie J.; Sun S.; Wang L.; Qiana Y.; Menga Y.; Wei Y. Microstructure and Mechanical Properties of Aluminyum 5083 Weldments by Gas Tunsten Arc and Gas Metal Arc Welding, Materials Science and Engineering A. 2012; 549, 7-13.
  • Singh L.; Shah V.; Singh N. Study of Influence of TIG Welding Parameters on Weld Characteristic of 5083 Aluminium Alloy, International Journal of Engineering Science and Innovative Technology 2013; 2, 462-468.
Toplam 14 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Bölüm Makaleler
Yazarlar

Recep Arıcı

Nurullah Köksal

Ece Ömeroğlu Bu kişi benim

Yayımlanma Tarihi 18 Aralık 2015
Yayımlandığı Sayı Yıl 2015 Cilt: 11 Sayı: 2

Kaynak Göster

APA Arıcı, R., Köksal, N., & Ömeroğlu, E. (2015). AA6061 Alaşımının İki Farklı Dolgu Teli Kullanılarak TIG Kaynağında Özelliklerin İncelenmesi - The Investigation of Properties in TIG Welding with Two Different Filler Wire of AA 6061. Celal Bayar University Journal of Science, 11(2). https://doi.org/10.18466/cbujos.98337
AMA Arıcı R, Köksal N, Ömeroğlu E. AA6061 Alaşımının İki Farklı Dolgu Teli Kullanılarak TIG Kaynağında Özelliklerin İncelenmesi - The Investigation of Properties in TIG Welding with Two Different Filler Wire of AA 6061. CBUJOS. Aralık 2015;11(2). doi:10.18466/cbujos.98337
Chicago Arıcı, Recep, Nurullah Köksal, ve Ece Ömeroğlu. “AA6061 Alaşımının İki Farklı Dolgu Teli Kullanılarak TIG Kaynağında Özelliklerin İncelenmesi - The Investigation of Properties in TIG Welding With Two Different Filler Wire of AA 6061”. Celal Bayar University Journal of Science 11, sy. 2 (Aralık 2015). https://doi.org/10.18466/cbujos.98337.
EndNote Arıcı R, Köksal N, Ömeroğlu E (01 Aralık 2015) AA6061 Alaşımının İki Farklı Dolgu Teli Kullanılarak TIG Kaynağında Özelliklerin İncelenmesi - The Investigation of Properties in TIG Welding with Two Different Filler Wire of AA 6061. Celal Bayar University Journal of Science 11 2
IEEE R. Arıcı, N. Köksal, ve E. Ömeroğlu, “AA6061 Alaşımının İki Farklı Dolgu Teli Kullanılarak TIG Kaynağında Özelliklerin İncelenmesi - The Investigation of Properties in TIG Welding with Two Different Filler Wire of AA 6061”, CBUJOS, c. 11, sy. 2, 2015, doi: 10.18466/cbujos.98337.
ISNAD Arıcı, Recep vd. “AA6061 Alaşımının İki Farklı Dolgu Teli Kullanılarak TIG Kaynağında Özelliklerin İncelenmesi - The Investigation of Properties in TIG Welding With Two Different Filler Wire of AA 6061”. Celal Bayar University Journal of Science 11/2 (Aralık 2015). https://doi.org/10.18466/cbujos.98337.
JAMA Arıcı R, Köksal N, Ömeroğlu E. AA6061 Alaşımının İki Farklı Dolgu Teli Kullanılarak TIG Kaynağında Özelliklerin İncelenmesi - The Investigation of Properties in TIG Welding with Two Different Filler Wire of AA 6061. CBUJOS. 2015;11. doi:10.18466/cbujos.98337.
MLA Arıcı, Recep vd. “AA6061 Alaşımının İki Farklı Dolgu Teli Kullanılarak TIG Kaynağında Özelliklerin İncelenmesi - The Investigation of Properties in TIG Welding With Two Different Filler Wire of AA 6061”. Celal Bayar University Journal of Science, c. 11, sy. 2, 2015, doi:10.18466/cbujos.98337.
Vancouver Arıcı R, Köksal N, Ömeroğlu E. AA6061 Alaşımının İki Farklı Dolgu Teli Kullanılarak TIG Kaynağında Özelliklerin İncelenmesi - The Investigation of Properties in TIG Welding with Two Different Filler Wire of AA 6061. CBUJOS. 2015;11(2).