The Impact Degrees of Basic Parameters on Repair Performance in Composite Patch Applications

Yıl 2019, Cilt: 15 Sayı: 2, 187 - 191, 30.06.2019

Sefa Burak Yücel Memet Zor Halit Doğan , Mustafa Karamolla

https://doi.org/10.18466/cbayarfbe.498884

Öz

In
this study, for composite patch repairs, the impact degrees of patch
configuration and patch sizes on repair performance were determined and
compared with each other. First, stress intensity factor (SIF) values were
calculated by using the Finite Element Method for tensile loading in an
aluminum plate with center cracks, in unpatched situation. In this model, the
repair was made by forming single and double sided patches and adhesive volumes
too. The SIF values are recalculated for different patch thicknesses, widths,
and crack lengths. The criterion that determines the impact degrees of the
examined parameters was accepted to be the reduction rate in the SIF values.
The results show that even the most disadvantageous patch application
contributes significantly to the repair performance and that the application
itself is the most effective factor. The second most effective parameter is
patch configuration; the patch sizes have much less impact degree

Anahtar Kelimeler

Stress intensity factor, composite patch, repair, fracture mechanics, finite element method

Kaynakça

• 1. Liu, X., Wang, G. 2007. Progressive failure analysis of bonded composite repairs. Composite Structure; 81: 331–340.
• 2. Charalambides, M.N, Hardouin, R, Kinloch, A.J, Matthews, F.L. 1998. Adhesively-bonded repairs to fibre-composite materials. Experimental, Composite Part A; (I): 1371–1381.
• 3. Hu, F.Z, Soutis, C. 2000. Strength prediction of patch-repaired CFRP laminates loaded in compression. Composite Science Technology; 60: 1103–1114.
• 4. Gong, X.-J, Cheng, P, Rousseau, J, Aivazzadeh S. Effect of Local Stresses on Static Strength and Fatigue Life of Patched Composite Panels, 16th International Conferance Composite Materials, Kyoto, Japan, 2007, pp 1–7.
• 5. Marín, J.C, Barroso, A, París, F, Cañas, J. 2009. Study of fatigue damage in wind turbine blades. Engineering Failure Analaysis; 16: 656–668.
• 6. Campilho, R.D.S.G, Moura, M.F.S.F, Pinto, A.M.G, Morais, J.J.L, Domingues, J.J.M.S. 2009. Modelling the tensile fracture behaviour of CFRP scarf repairs. Composite Part B Engineering; 40: 149–157.
• 7. Breitzman, T.D, Iarve, E.V, Cook, B.M, Lipton, R.P, Rouge, B. Optimum Design a Composite Scarf Repair Patch Under Uniaxial Tensile Load, 17th International Conference on Composite Materials 2009, Edinburgh, İskoçya, 2009, pp 1–10.
• 8. Wang, Q.Y, Pidaparti, R.M. 2002. Static characteristics and fatigue behavior of composite-repaired aluminum plates. Composite Structure; 56: 151–155.
• 9. Belhouari, M, Bachir Bouiadjra, B, Megueni, A, Kaddouri, K. 2004. Comparison of double and single bonded repairs to symmetric composite structures: A numerical analysis. Composite Structure; 65: 47–53.
• 10. Kumar, A.M, Ripudaman, S. 3D Finite Element Modelling of a Composite Patch Repair, 9th International Conference in Fracture, (ICF9), Sydney, Australia, 1997, pp 215–216.
• 11. Yang, C, Huang, H, Tomblin, J.S, Sun, W. 2004. Elastic - Plastic Model of a dhesive–bonded single-lap composite joints. Journal of Composite Material; 38: 293–309.
• 12. Baldan, A. 2004. Adhesively-bonded joints and repairs in metallic alloys, polymers and composite materials: Adhesives,adhesion theories and surface pretreatment. Journal Material Science: 39:1-49.
• 13. Campilho, R.D.S.G, Moura, M.F.S.F, Domingues, J.J.M.S. 2005. Modelling single and double-lap repairs on composite materials. Composite Science Technology; 69: 1948–1958.
• 14. Okafor, A.C, Bhogapurapu, H. 2006. Design and analysis of adhesively bonded thick composite patch repair of corrosion grind-out and cracks on 2024 T3 clad aluminum aging aircraft structures. Composite Structure; 76: 138–150.
• 15. Seo, D.C, Lee, J.J. 2002. Fatigue crack growth behavior of cracked aluminum plate repaired with composite patch. Composite Structure; 57: 323–330.
• 16. Denney, J.J, Directorate, F.D, Air, W, Base, F. 1997. Characterization of disbond effects on fatigue crack growth behavior in aluminum plate with bonded composite patch. Engineerig Fracture Mechanic; 57: 507–525.
• 17. Ouinas, D, Hebbar, A, Bouiadjra, B.B, Belhouari, M, Serier, B. 2009. Numerical analysis of the stress intensity factors for repaired cracks from a notch with bonded composite semicircular patch. Composite Part B Engineering; 40: 804–810.
• 18. Albedah, A, Bouiadjra, B.B, Mhamdia, R, Benyahia, F, Es-Saheb, M. 2011. Comparison between double and single sided bonded composite repair with circular shape. Materials Designe; 32: 996–1000.
• 19. Ramji, M, Srilakshmi, R, Bhanu Prakash, M. 2013. Towards optimization of patch shape on the performance of bonded composite repair using FEM. Composite Part B Engineering; 45: 710–720.
• 20. Kumar, A.M, Hakeem, S. A. 2000. Optimum design of symmetric composite patch repair to centre cracked metallic sheet. Composite Structure; 49: 285–292.