Microstructural Characterisations of Welded Shape Memory Alloys

Yıl 2019, Cilt: 15 Sayı: 4, 415 - 421, 30.12.2019

Halit Doğan Nevzat Sarı

https://doi.org/10.18466/cbayarfbe.497388

Öz

Today, with
the development of technology, different welding methods are applied for
different alloys. In this work, changing of functional properties after using
welding methods for NiTi alloy samples was targeted. However, two different
welding methods were employed for the same alloy and results were compared to
each other and commented on them. In the present study, samples were welded
with TIG and Laser welding and their cross section was examined in the joint
area. Then these samples were examined in optical microscope and SEM. The
advantages and disadvantages of both welding methods were reported. The basic distinction
of TIG and laser welded samples examined in microscope was the scale of HAZ
area of TIG welded piece. Nevertheless, due to more thermal input is applied
for materials in TIG welded parts, more molten materials are detected or heat
effects are attained in this practice. In laser welding, heat input is less and
this can be recognized from the observed micrographs. While HAZ area is obviously
distinguished and welding border zone is detached from the base metal. The twin
structures were not observed in optical microscope; for that reason they were
investigated in SEM to see these twins in laser welded area. 

Anahtar Kelimeler

NiTi, Shape Memory Alloy, Superelastic, Twinning

Kaynakça

• [1] Oliveira J P.; Miranda R M.; Braz Fernandes F.M. Welding and Joining of NiTi Shape Memory Alloys A Review, Progress in Materials Science, 2017; pp 412–466.
• [2] Mehrpouya M.; Gisario A.; Mohammad E., Laser welding of NiTi shape memory alloy, Journal of Manufacturing Processes, 2018; 31, pp 162–186.
• [3] Jani. J.M.; Leary M.; Subic A.; Gibson M.A.; Mohd J.J.; Leary M.; Subic A.; Gibson M.A. A review of shape memory alloy research, applications and opportunities, Mater. Des., 2014; 56, pp 1078–1113.[4] Patoor E..; Lagoudas D.C.; Entchev P.B.; Brinson L.C.; Gao X. Shape memory alloys, part I: general properties and modeling of single crystals, Mech. Mater., 2006; 38, pp 391–429.
• [5] Sun Y.; Luo J.; Zhu J. Phase field study of the microstructure evolution and thermomechanical properties of polycrystalline shape memory alloys: Grain size effect and rate effect, Computational Materials Science, 2018; 145, pp 252–262.
• [6] Özgün Ö.; Yılmaz R.; Gülsoy H.Ö.; Fındık F, The effect of aging treatment on the fracture toughness and impact strength of injection molded Ni-625 superalloy parts, Materials Characterization, 2015; 108, pp 8–15.
• [7] Cao S.; Xinhua W. et all, Role of martensite decomposition in tensile properties of selective laser melted Ti-6Al-4V, Journal of Alloys and Compounds, 2018; 744, pp 357-363.
• [8] Wang S.Q.; Liu J.H.; Chen D.L. Effect of strain rate and temperature on strain hardening behavior of a dissimilar joint between Ti–6Al–4V and Ti17 alloys, Materials and Design, 2014; 56, pp 174–184.
• [9] Mohd J.J.; Leary M.; Subic A.; Gibson M.A. A review of shape memory alloy research, applications and opportunities, Mater. Des.,2014; 56, pp 1078–1113.[10] Saedi S.; Sadi A.; Taheri M.; Shayesteh N., Texture, aging, and superelasticity of selective laser melting fabricated Ni- rich NiTi alloys, Mater. Sci. Eng. A, 2017; 686, pp 1–10.
• [11] Machado G.; Louche H.; Alonso T.; Favier D. Superelastic cellular NiTi tube-based materials: Fabrication, experiments and modeling, Materials and Design, 2014; 65, pp 212–220.
• [12]Vidyarthy R.S.; Dwivedi D.K.; Microstructural and mechanical properties assessment of the P91 A-TIG weld joints, Journal of Manufacturing Processes, 2018; 31, pp 523–535.
• [13] Guoxin H.; Lixiang Z.; Yunliang F.; Li Yanhong. Fabrication of high porous NiTi shape memory alloy by metal injection molding. School of Mechanical & Power Engineering, Shanghai Jiaotong University, 200240 Shanghai, China, 2008.
• [14] Goryczka T.; Humbeeckb J.V, NiTiCu shape memory alloy produced by powder technology, Journal of Alloys and Compounds, 2008; 456, pp 194–200.
• [15] Razorenov S.V.; Garkushin G.V.; Kanel G.I.; Kashin O.A.; Ratochka I.V.; Behavior of the nickeletitanium alloys with the shape memory effect under conditions of shock wave loading, Physic. Solid State, 2011, 53, pp 824-829.
• [16] Comer A.; Looney L. Crack propagation resistance of Zeron 100 weld metal fabricated using the GTA and SMA welding processes. Materials Processing Research Centre (MPRC), Dublin City University, Dublin 9, Ireland, 2006.
• [17] Tuissi A.; Besseghini S.; Ranucci T.; Squatrito F.; Pozzi M.. Effect of Nd-YAG laser welding on the functional properties of the Ni 49.6at.%Ti. Consiglio Nazionale delle Ricerche, Istituto per la Tecnologia dei Materiali e dei Processi Energetici, CNR-TEMPE sez. Lecco, C.so P.Sposi, 29 I-23900 Lecco, Italy. Politecnico di Milano- Dip.Meccanica, P.za Leonardo da Vinci, I-2013 Milan, Italy, 1999.
• [18] Falvo, A. Termomechanical characterization of Nickel-Titanium Shape Memory Alloys, Universita Della Calabria, Italy.2007; pp 43-47.
• [19] Yong L.; Wilson A.R.; Asanuma H.; Proceedings of the Conference on Smart Structures and Materials - 4234, SPIE, Newport Beach, CA, 2001; pp 92.
• [20] Hesse T.; Ghorashi M.; Inman D.J.; Intel. J. Shape Memory Alloy in Tension and Compression and its Application as Clamping-Force Actuator in a Bolted Joint, Mater. Syst. Struct., 2004;15, pp 577.
• [21] Wu Ming H.; Chu Y.Y.; Zhao L.C.; Shape Memory Materials and Their Applications, Trans Tech Publ. Inc., Kunming, China, 2001; pp 285.
• [22] Ikai A.; Kimura K.; TobushH.; Intel J.. Mater. Syst. Struct., 1996;7, pp 646.
• [23] Schlossmacher P.; Haas T.; Shussler A.;, J. Phys. IV Coll., 1997; C5, pp 251.
• [24] Haas T.; Schuessler A.; Van Moorleghem W.; Besselink P.; Aslanidis D.; Proceedings of the European Conference on Shape Memory and Superelasticity Technologies, SMST, Antwerp, Belgium, 1999; pp 103.
• [25] Chang-jun Q.; Pei-sun M.;, Qin Y. A prototype micro-wheeled-robot using SMA actuator, Sens. Actuators A-Phys.2004; 113 (1), pp 94.
• [26] Fischer H.; Vogel B.; Pfleging W.; Besser H.;, Mater. Sci. Eng. A; 1999 273–275, pp 780.
• [27] Beyer J.; Hiensch E.J.M.; Besselink P.A.; Hombogen E.; Jost N. The Martensitic Transformation in Science and Technology, DGM, Oberursel, Germany, 1989; pp 199.
• [28] Beyer J.; Besselink P.A.; Lindenhovius J.H.; Chu Y.; Hsu T.Y.; Ko T. Proceedings of International Symposium on Shape Memory Alloys, China Academic Publishers, Guilin, China, 1986; pp 492.