Investigation of Crystal Structure and Mechanical Properties of Electrochemically Deposited Ni-B/TiB2 Composite Coatings

Yıl 2021, Cilt: 36 Sayı: 4, 847 - 860, 29.12.2021

Ersin Ünal Abdülkadir Yaşar İsmail Hakkı Karahan

https://doi.org/10.21605/cukurovaumfd.1040321

Cited By: 1

Öz

In this study, Ni-B alloy mainstructure and TiB2 micro particle supported composite coating was deposited in a Watts type nickel bath on a stainless steel substrate. The properties of the composite microhardness, morphology and wear resistance analysis were executed in order to determine the effect of reinforcement particles. According to the results, it was seen that reinforcement particles cause changes on the crystal structure compared to pure nickel and Ni-B alloy. In addition, micro TiB2 particles caused an increase in hardness. The particles resulted in an increase in micro hardness of about 225% compared to stainless steel and about 115% compared to pure nickel, while it resulted in an increase of about 60% compared to the Ni-B alloy. It has been observed that the morphology of the composite coating was also quite different from other coatings, but has a generally smooth surface. In addition, it was understood from the analysis results that the wear resistance of the composite coating was better compared to the pure nickel and Ni-B alloy coatings.

Anahtar Kelimeler

Electrodeposition, Composite coating, Microhardness, Wear, Ni-B alloy

Elektrokimyasal Depolama Yöntemi ile AISI 304 Çeliği Yüzeyine Biriktirilen Ni-B/TiB2 Kompozit Kaplamaların Kristal Yapı ve Bazı Mekanik Özelliklerinin İncelenmesi

Öz

Bu çalışmada, Watts tipi nikel banyosunda Ni-B alaşım anayapılı ve TiB2 mikro parçacık takviyeli kompozit kaplama, paslanmaz çelik altlık üzerine depolanmıştır. Elde edilen kompozit kaplamanın özellikleri saf nikel ve Ni-B alaşım kaplamalar ile mukayese edilerek incelenmiştir. Takviye parçacıkların etkisini belirlemek amacıyla kristal yapı, mikrosertlik, morfoloji ve aşınma dayanımı analizleri yapılmıştır. Elde edilen sonuçlara göre takviye parçacıkların, saf nikel ve Ni-B alaşımına göre kristal yapı üzerinde değişime neden olduğu görülmüştür. Ayrıca mikro TiB2 parçacıklar sertlikte de artışa sebep olmuştur. Parçacıklar mikro sertlikte, paslanmaz çeliğe göre %225, saf nikele göre %115 civarında artışa sebep olurken, Ni-B alaşımına kıyasla yaklaşık %60 civarında bir artışla sonuçlanmıştır. Kompozit kaplamanın morfolojisinin de diğer kaplamalardan oldukça farklı olduğu, fakat genel olarak düzgün bir yüzeye sahip olduğu görülmüştür. Ayrıca, kompozit kaplamanın aşınma dayanımının saf nikel ve Ni-B alaşım kaplamalarına kıyasla daha iyi olduğu analiz sonuçlarından anlaşılmıştır.

Anahtar Kelimeler

Elektrodepolama, Kompozit kaplama, Mikrosertlik, Aşınma, Ni-B alaşım

Kaynakça

• 1. Vitry, V., Francq, E., Bonin, L., 2019. Mechanical Properties of Heat-Treated Duplex Electroless Nickel Coatings. Surface Engineering, 35, 159-67.
• 2. Salehikahrizsangi, P., Raeissi, K., Karimzadeh, F., Calabrese, L., Patane, S., Proverbio, E., 2018. Erosion-corrosion Behavior of Highly Hydrophobic Hierarchical Nickel Coatings. Colloids and Surfaces a-Physicochemical and Engineering Aspects, 558, 446-54.
• 3. Tozar, A., Karahan, İ.H., 2019. Investigation of the Mechanical Properties of Ni-B/hBN Composite Coatings Electrodeposited in Presence of CTAB as the Surfactant. Material Research Express, 6(12), 12.
• 4. Li, B.S., Zhang, W.W., Li, D.D., Huan, Y.X., Dong, J., 2018. Microstructural, Surface and Electrochemical Properties of a Novel Ni-B/Ni-W-BN Duplex Composite Coating by Co-Electrodeposition. Applied Surface Science, 458, 305–318.
• 5. Matsui, I., Omura, N., Yamamoto T., Takigawa Y., 2018. Electrodeposition with Intermittent Addition of Trimethylamine Borane to Produce Ductile Bulk Nanocrystalline Ni–B Alloys. Surface & Coatings Technology, 337, 411–417.
• 6. Mukhopadhyay, A., Barman, T.K., Sahoo, P., 2017. Effects of Heat Treatment on Tribological Behavior of Electroless Ni-B Coating at Elevated Temperatures. Surface Review Letters, 24, 22.
• 7. Srinivasan, K.N., Meenakshi, R., Santhi, A., Thangavelu, P.R., John, S., 2010. Studies on Development of Electroless Ni-B Bath for Corrosion Resistance and Wear Resistance Applications. Surface Engineering, 26, 153-158.
• 8. Hu, C., Xu, M., Zhang, J., Hu, B., Yu, G., 2019. High Corrosion Resistance of Electroless Ni/Ni-B Coating from Fluoride-free Baths on AZ31 Magnesium Alloy. Journal of Alloys and Compounds, 770, 48-57.
• 9. Koch, C.C., 2007. Structural Nanocrystalline Materials: an Overwiew, J. Mater. Sci. 42(5), 1403-1414.
• 10. Ünal, E., Yaşar, A., Karahan, İ.H., 2019. A Review of Electrodeposited Composite Coatings with Ni-B Alloy Matrix. Materials Research Express, 6, 092004.
• 11. Shakoor, R.A., Kahraman, R., Waware, U.S., Wang, Y., Gao, W., 2014. Properties of Electrodeposited Ni-B-Al2O3 Composite Coatings. Materials and Design, 64, 127-135.
• 12. Cho, H.J., Kim, Y.J., Erb, U., 2018. Thermal Conductivity of Copper-diamond Composite Materials Produced by Electrodeposition and the Effect of TiC Coatings on Diamond Particles. Composite Part B-Engineering, 155, 197-203.
• 13. Ünal, E., Karahan, İ.H., 2018. Production and Characterization of Electrodeposited Ni-B/hBN Composite Coatings. Surface & Coatings Technology, 333, 125-137.
• 14. Zhang, W., Li, B., 2018, Influence of Electrodeposition Conditions on the Microstructure and Hardness of Ni-B/SiC Nanocomposite Coatings. Int. J. Electrochem. Sci., 13(4), 3486-3500.
• 15. Waware, U.S., Hamouda, A.M.S., Pradhan, A.K., 2018. Effect of Codeposition of Mixed Nanoparticles (V2O5 and ZrO2) on the Structure and Properties of Ni-B Nanocomposite Coating. Journal of Alloys and Compounds, 752, 253-259.
• 16. Waware, U.S., Hamouda, A.M.S., Bajaj, B., Borkar, T., Pradhan, A.K., 2018. Synthesis and Characterization of Electrodeposited Ni-B-Tl2O3 Composite Coatings. Journal of Alloys and Compounds, 769, 353-359.
• 17. Waware, U.S., Hamoudaa, A.M.S., Wasekar, N.P., 2018. Mechanical Properties. Thermal Stability and Corrosion Behavior of Electrodeposited Ni-B/AlN Nanocomposite Coating. Surface & Coatings Technology, 337, 335-341.
• 18. Monteiro, O.R., Murugesan, S., Khabashesku, V., 2015. Electroplated Ni–B Films and Ni–B Metal Matrix Diamond Nanocomposite Coatings. Surface & Coatings Technology, 272, 291-297.
• 19. Li, B., Zhang, W., 2020. Facile Synthesis and Electrochemical Properties of a Novel Ni-B/TiC Composite Coating via Ultrasonic-Assisted Electrodeposition. Ultrasonics-Sonochemistry, 61, 104837.
• 20. Li, D., Li, B., Du, S., Zhang, W., 2019. Synthesis of a Novel Ni–B/YSZ Metal-Ceramic Composite Coating via Single Step Electrodeposition at Different Current Density. Ceramics International, 45, 24884-24893.
• 21. Krishnaveni, K., Narayanan, T.S.N.S., Seshadri, S.K., 2009. Wear resistance of Electrodeposited Ni–B and Ni–B–Si3N4 Composite Coatings. J. Mater. Sci., 44, 433-440.
• 22. Ett, G., Pessine, E.J., 1999. Pulse Current Plating of TiB2 in Molten Fluoride. Electrochimica Acta, 44, 2859-2870.
• 23. Gyawali, G., Cho, S.H., Lee, S.W., 2013. Electrodeposition and Characterization of Ni-TiB2 Composite Coatings. Metals and Materials International, 19(1), 113-118.
• 24. Gyawali, G., Tripathi, K., Joshi, B., Lee, S.W., 2017. Mechanical and Tribological Properties of Ni-W-TiB2 Composite Coatings. Journal of Alloys and Compounds, 721, 757-763. 25. Lee, K.B., Yoo, S.H., Kim, H.S., Won, S.O., Yang, B.J., Ahn, J.P., Choi, H.J., 2017. Nitridation-Assisted Al Infiltration for Fabricating Al Composites. Journal of Materials Science, 52, 4333-4344.
• 26. Huang, X., Zhaoa, Z., Zhanga, L., Yinb, C., Wu, J., 2014. Microstructure Modification and Fracture Behavior of Solidified TiC–TiB2 Ceramic Prepared by Combustion Synthesis in Ultra-High Gravity Field. Journal of Asian Ceramic Societies, 2, 144–149.
• 27. Huang, X., Sun, S., Tu, G., Lu, S., Li, K., Zhu, X., 2017. The Microstructure of Nanocrystalline TiB2 Films Prepared by Chemical Vapor Deposition. Materials, 10(12), 1425.
• 28. Urszula, D.W., Agnieszka, T., Bogusław, R., 2017. Vibrational Spectroscopy of Binary Titanium Borides: First-Principles and Experimental Studies. Advances in Condensed Matter Physics, 18, 1-9.
• 29. Luo, P., Donga, P., Yanglib, A., Sunc, S., Zhengb, Z., Wang, H., 2015. Electrospark Deposition of Al2O3–TiB2/Ni Composite-Phase Surface Coatings on Cu–Cr–Zr Alloy Electrodes. Journal of Asian Ceramic Societies, 3, 103–107.
• 30. Boukhoubza, I., Khenfouch, M., Achehboune, M., Mothudi, B.M., Zorkani, I., Jorio A., 2019. X-ray Diffraction Investigations of Nanostructured ZnO Coated with Reduced Graphene Oxide. Journal of Physics, 1292, 012011.
• 31. Bindu, P., Thomas, S., 2014. Estimation of Lattice Strain in ZnO Nanoparticles: X-ray Peak Profile Analysis. Journal of Theoretical and Applied Physics, 8, 123-134.
• 32. Saleem, M., Fang, L., Ruan, H.B., Wu, F., Huang, Q.L., Xu, C.L., Kong, C.Y., 2012. Effect of Zinc Acetate Concentration on the Structural and Optical Properties of ZnO Thin Films Deposited by Sol-Gel Method International. Journal of Physical Sciences, 7(23), 2971-2979.
• 33. Bilgin, V., Köse, S., Atay, F., Akyüz, I., 2005. The Effect of Substrate Temperature on the Structural and Some Physical Properties of Ultrasonically Sprayed CdS Films. Materials Chemistry and Physics 94, 103-108.
• 34. Khan, Z. R., Zulfequar, M., Khan, M.S., 2010. Optical and Structural Properties of Thermally Evaporated Cadmium Sulphide Thin Films on Silicon (100) Wafers. Materials Science and Engineering B, 174, 145-149.
• 35. Williamson, G.B., Smallman, R.C., 1956. Dislocation Densities in Some Annealed and Cold-worked Metals from Measurements on the x-ray Debye-scherrer Spectrum. Philosophical Magazine A, Series 8, 1, 34-46.
• 36. Patterson, A.L., 1939. The Scherrer Formula for X-ray Particle Size Determination. Physical Rewiev, 56, 978-982.
• 37. Gyawali, G., Kim, H.S., Tripathi, K., Kim, T.H., 2014. Fabrication and Characterization of Electrodeposited Ni–SiC–hBN Composite Coatings. J. Mater. Sci. Technol., 30(8), 796-802.
• 38. Bekish, Y.N., Poznyak, S.K., Tsybulskaya, L.S., Gaevskaya, T.V., 2009. Electrodeposited Ni–B Alloy Coatings; Structure, Corrosion Resistance and Mechanical Properties. Electrochimica Acta, 55, 2223-2231.
• 39. Gyawali, G., Lee, S.W., 2015. Effect of SiC and hBN Codeposition on Microstructural and Tribological Properties of Ni-SiC-hBN Composite Coatings. Ceramic Processing Research, 16(2), 213-217.
• 40. Ogihara, H., Udagawa, K., Saji, T., 2011. Effect of Boron Content and Crystalline Structure on Hardness in Electrodeposited Ni–B Alloy Films, Surface&Coatings Technology. 206, 2933-2940.
• 41. Wang, Y., Wang, S., Shu, X., Gao, W. Lu, W., Yan, B., 2014. Preparation and Property of Sol-Enhanced Ni–B–TiO2 Nano-Composite Coatings. J. of Alloys and Compounds, 617, 472-478.
• 42. Ağdacı, G.E., 2019. Dökme Demir-nikel Alüminat-bronz Tabakalı Kompozitin Sürtünme ve Aşınma Davranışları. Yüksek Lisans Tezi, Fen Bilimleri Enstitüsü, Eskişehir Osmangazi Üniversitesi, 82.
• 43. Özmen, Y., Jahanmir S., 2015. Sulu Ortamda Silisyum Nitrür Üzerindeki Nanoyapılı Yüzeylerin Çok Düşük Sürtünme Özellikleri. Pamukkale Üniv. Müh. Bilim. Derg., 21(8), 337-343. 44. ASTM G99-05, 2005. Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus. ASTM International, West Conshohocken, PA.
• 45. Günen A., 2012. Nano Bor Tozu ile Yüzeyi Alaşımlandırılan Östenitik Paslanmaz Çeliğin Mekanik Özellikler ve Korozyon Davranışının Araştırılması. Doktora Tezi, Fen Bilimleri Enstitüsü, Fırat Üniversitesi, 223.