Biyomedikal Uygulamalar için Esnek Alt Tabakalar Kullanarak Frekans-Yapılandırılabilir Yeni Bir Yama Anten Tasarımı

Yıl 2023, Cilt: 38 Sayı: 2, 411 - 420, 28.07.2023

Emine Avşar Aydın Mustafa Berkan Biçer

https://doi.org/10.21605/cukurovaumfd.1333992

Öz

Bu araştırmanın amacı, kanser tümörü tespiti için çeşitli malzemeler kullanarak esnek bir yatay H-şekilli mikroşerit anten (esnek-HHMA) tasarlamak ve uygulamaktır. Tümör tespit sensörleri olarak da kullanılabilen ve hem alıcı hem de verici olarak görev yapabilen mikroşerit antenler yama ve toprak düzlemi olmak üzere iki ana bileşenden oluşmaktadır. Yama ve toprak düzlemlerini oluşturmak için çeşitli malzemelerin anten performansı üzerindeki etkilerini analiz etmek için bakır bant kullanılırken diğer tarafdan alt tabaka olarak keçe, kot pantolon parçası ve fotoğraf kağıdı kullanıldı. Bunu başarmak için, biyomedikal uygulamalarda sıklıkla kullanılan 2 ila 10 GHz frekans aralığında çalışan antenler dizayn edildi ve sonlu entegrasyon tekniğine (FIT) dayalı bir tam dalga elektromanyetik çözücü kullanılarak hesaplamalar yapıldı. Önerilen mikroşerit antenler, mikrodalga frekanslarında sağlıklı ve kötü huylu dokular arasındaki dielektrik kontrasttan yararlanan biyomedikal ölçüm sistemlerinde sensörler olarak kullanılabilecektir.

Anahtar Kelimeler

Esnek, Yatay H-şekilli mikroşerit anten (HHMA), Mikrodalga görüntüleme, Ultra geniş bant, Kazanç, Radyasyon özelliği

A Novel Frequency-Configurable Patch Antenna Design Using Flexible Substrates for Biomedical Applications

Öz

The purpose of this research was to design and implement a flexible horizontal H-shaped microstrip antenna (flexible-HHMA) using various materials for cancer tumor detection. Microstrip antennas, which can also be utilized as tumor detection sensors and can function as both a receiver and a transmitter, are composed of two major components: the patch and the ground plane. The copper tape was used to analyze various materials’ impacts on antenna performance to form the patch and ground planes, and felt, jean, and photo paper was employed as the substrate. To accomplish this, antennas operating at frequencies ranging from 2 to 10 GHz, frequently used in biomedical applications, were constructed and computations performed using a full wave electromagnetic solver based on finite integration technique (FIT). The proposed microstrip antennas may be used as sensors in biomedical measurement systems that make use of the dielectric contrast between the healthy and malignant tissues at microwave frequencies.

Anahtar Kelimeler

Flexible, Horizontal H-shaped microstrip antenna (HHMA), Microwave imaging, ultra-wideband, Gain, Radiation characteristic

Kaynakça

• 1. Sung, H., Ferlay, J., Siegel, R.L., Laversanne, M., Soerjomataram, I., Jemal, A., Bray, F., 2021. Global Cancer Statistics 2020: GLOBOCAN Estimates of Incidence and Mortality Worldwide for 36 Cancers in 185 Countries. CA: A Cancer Journal for Clinicians, 71(209-49).
• 2. WCRF International, Cancer Trends - Statistics per Cancer Type, https://www.wcrf.org/diet-and-cancer/cancer-trends/, Access date: June, 2021.
• 3. Aldhaeebi, M.A., Alzoubi, K., Almoneef, T.S., Bamatra, S.M., Attia, H., Ramahi, O.M., 2020. Review of Microwaves Techniques for Breast Cancer Detection. Sensors, 20(8), 1-38.
• 4. Kwon, S., Lee, S., 2016. Recent Advances in Microwave Imaging for Breast Cancer Detection. International Journal of Biomedical Imaging, 2016, Article 5054912.
• 5. Sergieiev, O., 2010. Requirements Analysis and Modelling of an Antenna Element for Breast Cancer Microwave Imaging. Master of Engineering Thesis, Auckland University of Technology.
• 6. He, Y., Liu, Y., Dyer, B.A., Boone, J.M., Liu, S., Chen, T., Zheng, F., Zhu, Y., Sun, Y., Rong, Y., Qiu, J., 2019. 3D-printed Breast Phantom for Multi-purpose and Multi-modality Imaging. Quantitative Imaging in Medicine and Surgery, 9, 63-74.
• 7. Butscher, A., Bohner, M., Doebelin, N., Hofmann, S., Müller, R., 2013. New Depowdering-friendly Designs for Three-dimensional Printing of Calcium Phosphate Bone Substitutes. Acta Biomaterialia, 9(11), 9149-9158.
• 8. Farooqui, M.F., Shamim, A., 2016. Low Cost Inkjet Printed Smart Bandage for Wireless Monitoring of Chronic Wounds. Scientific Reports, 6, 2-3.
• 9. Ghazali, M.I.M., Karuppuswami, S., Kaur, A., Chahal, P., 2017. 3-D Printed Air Substrates for the Design and Fabrication of RF Components. IEEE Transactions on Components, Packaging and Manufacturing Technology, 7(6), 982-989.
• 10. Zhang, S., Arya, R.K., Pandey, S., Vardaxoglou, Y., Whittow, W., Mittra, R., 2016. 3D-printed Planar Graded Index Lenses. IET Microwaves, Antennas and Propagation, 10(13), 1411-1419.
• 11. Topsakal, E., 2009. Antennas for Medical Applications: Ongoing Research and Future Challenges. Proceedings of the 2009 International Conference on Electromagnetics in Advanced Applications, 890-893.
• 12. Sondas, A., Ucar, M.H.B., 2013. An Implantable Microstrip Antenna Design for Biomedical Telemetry. International Conference on Electronics, Computer and Computation, 32-35.
• 13. Kirtania, S.G., Elger, A.W., Hasan, M.R., Wisniewska, A., Sekhar, K., Karacolak, T., Sekhar, P.K., 2020. Flexible Antennas: A Review. Micromachines, 11(9), 847.