Comparison of Reduced Relative Storey Drifts According to Current Earthquake Code (DBYBHY2007) and New Draft Earthquake Code (TBDY2016)
Öz
Maximum relative floor displacements are one of the basic parameters that are limited by the regulations
in terms of safety for the regulations. According to the Regulation on the Turkish Earthquake Code (TEC)
2007 which are currently in force in our country, the limits and criteria of the relative floor drifts obtained
vary according to the TEC 2016 in draft. In this study, the "Effective Relative Floor Shift" account and
boundary conditions of both directives are compared in detail. It is understood that the permissible floor
folding limits allowed in the draft regulation are increased in the majority of the cases in general, in case
of the joint of the filler wall-frame joint, and in the case of the jointed design, two times higher than the
joint.
Anahtar Kelimeler
Kaynakça
- 1. Zhou, J., Bu, G.B., Li., K.N., 2012. Calculation Methods for Inter-Story Drifts of Building Structures, 15th World Conf. Earthq. Eng., no. 3, p. 7.
- 2. Sindel, Z., Akbaş, R., Tezcan., S.S., 1996. Drift Control and Damage in Tall Buildings, Eng. Struct., vol. 18, no. 12, pp. 957–966.
- 3. TBDY, 2016. Türkiye Bina Deprem
Ayrıntılar
Birincil Dil
Türkçe
Konular
-
Bölüm
Araştırma Makalesi
Yazarlar
Muhammet Musab Erdem
Bu kişi benim
İSKENDERUN TEKNİK ÜNİVERSİTESİ, MÜHENDİSLİK VE DOĞA BİLİMLERİ FAKÜLTESİ, İNŞAAT MÜHENDİSLİĞİ BÖLÜMÜ
Murat Bikçe
*
Bu kişi benim
Yayımlanma Tarihi
15 Haziran 2017
Gönderilme Tarihi
24 Mayıs 2017
Kabul Tarihi
31 Mayıs 2017
Yayımlandığı Sayı
Yıl 2017 Cilt: 32 Sayı: 2
Cited By
ÇERÇEVE+ PERDE TÜRÜ BETONARME BİNALARIN PERİYOD HESAPLARININ TBDY-2019 YÖNETMELİĞİNE GÖRE AMPİRİK OLARAK DEĞERLENDİRİLMESİ
Uludağ University Journal of The Faculty of Engineering
https://doi.org/10.17482/uumfd.603437Tasarım Spektral İvme Katsayılarının DBYBHY 2007 ve TBDY 2018 Yönetmeliklerine Göre Karşılaştırması
DÜMF Mühendislik Dergisi
https://doi.org/10.24012/dumf.559965BETONARME BİR BİNANIN EŞDEĞER DEPREM YÜKÜ YÖNTEMİ İLE DBYBHY 2007 VE TBDY 2018 YÖNETMELİKLERİNE GÖRE ANALİZİ
Konya Journal of Engineering Sciences
https://doi.org/10.36306/konjes.867309YAPISAL TASARIM BAĞLAMINDA 2007 VE 2018 DEPREM YÖNETMELİKLERİNİN KARŞILAŞTIRILMASI, NİĞDE ÖRNEĞİ
Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi
https://doi.org/10.28948/ngumuh.667365Comparative Investigation of Different Earthquake Load Calculation Methods for Reinforced Concrete Buildings in the 2007 and 2019 Codes
Uluslararası Muhendislik Arastirma ve Gelistirme Dergisi
https://doi.org/10.29137/umagd.844186