How the Translucency and Color Stability of Single-Shade Universal Resin Composites Are Affected by Coffee?

Yıl 2024, Cilt: 34 Sayı: 4, 270 - 275, 15.10.2024

Büşra Özdemir Betül Kübra Kurucu Karadeniz Seyit Bilal Özdemir Ömer Akbulut

https://doi.org/10.17567/currresdentsci.1556035

Öz

Objective: The aim of this study was to examine how staining with coffee affects single-shade universal resin composites and a multi shade universal resin composite in terms of translucency and color stability.
Method: Five different resin composites (Omnichroma, Vittra APS Unique, Zenchroma, Charisma Diamond One, and Neo Spectra ST) were used to create 50 samples (n=10). A spectrophotometer was used to record translucency parameter (TP00) and color changes ( ΔE00) at baseline and after immersion in coffee for 24 h. Color differences were calculated according to CIEDE2000. Data analysis was performed using one-way ANOVA and the paired-samples t-test.
Results: After immersion of resin composite samples in coffee for 24 h the Vittra APS Unique group showed the highest ΔE00 value and the Neo Spectra ST group the lowest (P<0.001). At baseline, low TP00 values were observed in Neo Spectra ST and Charisma Diamond One and high TP00 values in Omnichroma and Vittra APS Unique (P<0.001). After being stained with coffee On day 1, low TP00 values were recorded in Neo Spectra ST and Charisma Diamond One, and high values TP00 in Omnichroma and Zenchroma (P<0.001).
Conclusion: Short-term staining resulted in less color change in the multi shade universal resin composite than in the single-shade universal resin composites. ΔE00 and TP00 values varied between the single-shade universal resin composites
Keywords: Color Stability, Multi shade Universal Resin Composite, Single-Shade Universal Resin Composite, Translucency Parameter

Anahtar Kelimeler

Color Stability, Multi shade Universal Resin Composite, Single-Shade Universal Resin Composite

Kaynakça

• 1. Bragança RM, Moraes RR, Faria-e-Silva AL. Color assessment of resin composite by using cellphone images compared with a spectrophotometer. Res Dent Endod. 2021;46(2). doi:10.5395/ RDE.2021.46.E23
• 2. Dunn K. Shade-Matching capacity of omnichroma in anterior restorations. Open Access J Dent Sci. 2020;5(2). doi:10.23880/oajds-16000247
• 3. Lucena C, Ruiz-López J, Pulgar R, Della Bona A, Pérez MM. Optical behavior of one-shaded resin-based composites. Dent Material. 2021;37(5):840-848. doi:10.1016/J.DENTAL.2021.02.011
• 4. Trifkovic B, Powers JM, Paravina RD. Color adjustment potential of resin composites. Clin Oral Inves. 2018;22(3):1601-1607. doi:10.1007/S00784-017-2260-6
• 5. Morsy AS, Gamal WM, Riad M. Color Matching of a Single Shade Structurally Colored Universal Resin Composite with the Surrounding Hard Dental Tissues. Egyptian Dent J. 2020;66(4):2721-2727. doi:10.21608/EDJ.2020.36824.1192
• 6. ElSayad II. Color and translucency of finished and unfinished esthetic restorative materials after staining and bleaching. Saudi Dent J. 2018;30(3):219-225. doi:10.1016/J.SDENTJ.2018.02.002
• 7. Spina DRF, Grossi JRA, Cunali RS, et al. Evaluation of Discoloration Removal by Polishing Resin Composites Submitted to Staining in Different Drink Solutions. Int Scholarly Res Notic. 2015;2015:853975. doi:10.1155/2015/853975
• 8. Sulaiman T, Suliman A, Mohamed E, Rodgers B, Altak A. Mechanical Properties of Bisacryl-, Composite-, and Ceramic-resin Restorative Materials. Oper Dent. Published online January 14, 2022. doi:10.2341/20-191-L
• 9. Mizutani K, Takamizawa T, Ishii R, et al. Flexural Properties and Polished Surface Characteristics of a Structural Colored Resin Composite. Oper Dent. 2021;46(3). doi:10.2341/20-154-L
• 10. Atali PY, Kaya BD, Özen AM, et al. Assessment of Micro-Hardness, Degree of Conversion, and Flexural Strength for Single-Shade Universal Resin Composites. Polymers. 2022;14(22):4987. doi:10.3390/polym14224987
• 11. Faul F, Erdfelder E, Buchner A, Lang AG. Statistical power analyses using G*Power 3.1: tests for correlation and regression analyses. Behav Res Method. 2009;41(4):1149-1160. doi:10.3758/BRM. 41.4.1149
• 12. Luo MR, Cui G, Rigg B. The development of the CIE 2000 colour‐difference formula: CIEDE2000. Color Res Appl. 2001;26(5):340-350. doi:10.1002/COL.1049
• 13. Fairchild MD. CIE 015:2018 Colorimetry, 4th Edition. Color Res Appl. 2019;44(4):674-675. doi:10.1002/COL.22387
• 14. Paravina RD, Ghinea R, Herrera LJ, et al. Color Difference Thresholds in Dentistry. J Esth Res Dent. 2015;27(S1). doi:10.1111/jerd.12149
• 15. Salas M, Lucena C, Herrera LJ, Yebra A, Della Bona A, Pérez MM. Translucency thresholds for Dent Mater. Dent Mater. 2018;34(8):1168-1174. doi:10.1016/j.dental.2018.05.001
• 16. Hasanain FA. Flexural Strength and Depth of Cure of Single Shade Dental Composites. J Pharm Res Int. Published online November 11, 2021:110-118. doi:10.9734/jpri/2021/v33i49a33310
• 17. Garoushi S, Lassila L, Hatem M, et al. Influence of staining solutions and whitening procedures on discoloration of hybrid composite resins. Acta Odontol Scand. 2012;71(1):144-150. doi:10.3109/ 00016357.2011.654253
• 18. K Kumari RV, Nagaraj H, Siddaraju K, Poluri RK. Evaluation of the Effect of Surface Polishing, Oral Beverages and Food Colorants on Color Stability and Surface Roughness of Nanocomposite Resins. J Int Oral Health : JIOH. 2015;7(7):63-70. https://pubmed. ncbi.nlm.nih. gov/26229373/
• 19. Türkün L, Leblebicioğlu E. Stain retention and surface characteristics of posterior composites polished by one-step systems. Am J Dent. 2006;19(6):343-347. https://www.ncbi.nlm.nih.gov/pubmed/17212075
• 20. Alawjali SS, Lui JL. Effect of one-step polishing system on the color stability of nanocomposites. J Dent. 2013;41:e53-e61. doi:10.1016/ j.jdent.2012.10.008
• 21. Ferracane JL. Hygroscopic and hydrolytic effects in dental polymer networks. Dent Material. 2006;22(3):211-222. doi:10.1016/ J.DENTAL. 2005.05.005
• 22. Nie J, Lindén LÅ, Rabek JF, et al. A reappraisal of the photopolymerization kinetics of triethyleneglycol dimethacrylate initiated by camphorquinone-N,N-dimethyl-p-toluidine for dental purposes. Acta Polymerica. 1998;49(4):145-161. doi:10.1002/ (SICI)1521-4044(199804)49:4<145::AID-APOL145>3.0.CO;2-D.
• 23. Falkensammer F, Arnetzl GV, Wildburger A, Freudenthaler J. Color stability of different composite resin materials. J Prosthet Dent. 2013;109(6):378-383. doi:10.1016/s0022-3913(13)60323-6
• 24. Gómez-Polo C, Gómez-Polo M, Celemin-Viñuela A, Martínez Vázquez de Parga JA. Differences between the human eye and the spectrophotometer in the shade matching of tooth colour. J Dent. 2014;42(6):742-745. doi:10.1016/J.JDENT.2013.10.006
• 25. Khurana R, Tredwin CJ, Weisbloom M, Moles DR. A clinical evaluation of the individual repeatability of three commercially available colour measuring devices. BDJ. 2007;203(12):675-680. doi:10.1038/bdj.2007.1108
• 26. Zenthöfer A, Cabrera T, Corcodel N, Rammelsberg P, Hassel AJ. Comparison of the Easyshade Compact and Advance in vitro and in vivo. Clin Oral Invest. 2013;18(5):1473-1479. doi:10.1007/s00784-013-1118-9
• 27. Paravina RD, Pérez MM, Ghinea R. Acceptability and perceptibility thresholds in dentistry: A comprehensive review of clinical and research applications. J Esthet Res Dent. 2019;31(2):103-112.
• 28. Ghinea R, Pérez MM, Herrera LJ, Rivas MJ, Yebra A, Paravina RD. Color difference thresholds in dental ceramics. J Dent. 2010;38:e57-e64. doi:10.1016/j.jdent.2010.07.008
• 29. Gómez-Polo C, Muñoz MP, Luengo MCL, Vicente P, Galindo P, Casado AMM. Comparison of the CIELab and CIEDE2000 color difference formulas. J Prosthet Dent. 2016;115(1):65-70. doi:10.1016/j.prosdent.2015.07.001.
• 30. Bagheri R, Burrow MF, Tyas M. Influence of food-simulating solutions and surface finish on susceptibility to staining of aesthetic restorative materials. J Dent. 2005;33(5):389-398. doi:10.1016/j.jdent.2004.10.018
• 31. Ertaş E, Güler AU, Yücel AC, Köprülü H, Güler E. Color Stability of Resin Composites after Immersion in Different Drinks. Dent Mater J. 2006;25(2):371-376. doi:10.4012/dmj.25.371
• 32. Malekipour MR, Sharafi A, Kazemi S, Khazaei S, Shirani F. Comparison of color stability of a composite resin in different color media. DOAJ (DOAJ: Directory of Open Access Journals). Published online July 1, 2012. https://doaj.org/article/a7bae89d07cc4a13acffca3649b3d1f4
• 33. Sideridou I, Tserki V, Papanastasiou G. Study of water sorption, solubility and modulus of elasticity of light-cured dimethacrylate-based dental resins. Biomater. 2002;24(4):655-665. doi:10.1016/s0142-9612(02)00380-0
• 34. Reis A, Giannini M, Lovadino JR, Ambrosano GMB. Effects of various finishing systems on the surface roughness and staining susceptibility of packable composite resins. Dent Mater. 2003;19(1):12-18. doi:10.1016/S0109-5641(02)00014-3
• 35. Demirci M, Tuncer S, Sancakli H, Tekçe N, Baydemir C. Five-year Clinical Evaluation of a Nanofilled and a Nanohybrid Composite in Class IV Cavities. Oper Dent. 2018;43(3):261-271. doi:10.2341/16-358-c
• 36. Ren YF, Feng L, Serban D, Malmstrom HS. Effects of common beverage colorants on color stability of dental composite resins: The utility of a thermocycling stain challenge model in vitro. J Dent. 2012;40:e48-e56. doi:10.1016/j.jdent.2012.04.017.
• 37. Fidan M, Yagci O. Do universal adhesive systems affect color coordinates and color change of single-shade resin composites compared with a multi-shade composite? Dent Mater J. Published online October 31, 2023. doi:10.4012/dmj.2023-120
• 38. Suh Y-R, Ahn J-S, Ju S-W, Kim K-M. Influences of filler content and size on the color adjustment potential of nonlayered resin composites. Dent Mater J. 2017;36(1):35-40.
• 39. Heffernan MJ, Aquilino SA, Diaz-Arnold AM, Haselton DR, Stanford CM, Vargas MA. Relative translucency of six all-ceramic systems. Part I: Core materials. J Prosthet Dent. 2002;88(1):4-9. doi:10.1067/mpr.2002.126794
• 40. Bouschlicher MR, Cobb DS, Boyer DB. Radiopacity of compomers, flowable and conventional resin composites for posterior restorations. PubMed. 1999;24(1):20-25. https://pubmed.ncbi. nlm.nih.gov/10337294
• 41. Fidan M, Yagci O. Effect of aging and fiber-reinforcement on color stability, translucency, and microhardness of single-shade resin composites versus multi-shade resin composite. J Esthet Res Dent. Published online August 25, 2023. doi:10.1111/jerd.13125
• 42. Azzopardi N, Moharamzadeh K, Wood DJ, Martin N, Van Noort R. Effect of resin matrix composition on the translucency of experimental dental composite resins. Dent Mater. 2009;25(12): 1564-1568. doi:10.1016/j.dental.2009.07.011
• 43. Alshehri A, Alhalabi F, Mustafa M, et al. Effects of Accelerated Aging on Color Stability and Surface Roughness of a Biomimetic Composite: An In Vitro Study. Biomimetics. 2022;7(4):158. doi:10.3390/ biomimetics7040158
• 44. Prodan CM, Gasparik C, Ruiz-López J, Dudea D. Color and Translucency Variation of a One-Shaded Resin-Based Composite after Repeated Heating Cycles and Staining. Materials. 2023;16(10): 3793. doi:10.3390/ma16103793
• 45. Quek SHQ, Yap AUJ, Yap AUJ, Rosa V, Tan KBC, Teoh KH. Effect of staining beverages on color and translucency of CAD/CAM composites. J Esth Res Dent. 2018;30(2). doi:10.1111/JERD.12359
• 46. Ota M, Ando S, Endo H, Ogura Y, Miyazaki M, Hosoya Y. Influence of refractive index on optical parameters of experimental resin composites. Acta Odontol Scand. 2011;70(5):362-367. doi:10.3109/00016357.2011.600724
• 47. Tabatabaee MH, Mahdavi H, Zandi S, Kharrazi MJ. HPLC Analysis of Eluted Monomers from Two Composite Resins Cured with LED and Halogen Curing Lights. J Biomed Mater Res. Part B. 2009;88(1):191-196. doi:10.1002/JBM.B.31167