3D Printing/Additive Manufacturing Technologies in Dentistry: A Bibliometric Study

Yıl 2025, Cilt: 35 Sayı: 2, 154 - 158, 20.04.2025

Mithat Terzi Begum Tuğçe Bulut S. Kutalmış Büyük Mustafa Cihan Yavuz Feridun Abay

https://doi.org/10.17567/currresdentsci.1677754

Cited By: 1

Öz

Objective: The aim of this study was to present a bibliometric analysis of scientific articles about the additive manufacturing technologies in dentistry.
Method: The papers published until 24 July 2023, were searched in Web of Science. The top 50 articles with the highest citations and suitable for the study subject were selected among the totally 604 articles.
Results: The United States positioned first in the number of articles with a total of 13 articles. Most included articles were published in Journal of Prosthetic Dentistry (n=8), Dental Materials (n=6), Journal of Prosthodontics-Implant Esthetic and Reconstructive Dentistry (n=5), and Materials (n=4). The most cited article was published in 2019 and the number of citations in Web of Science was 194.
Conclusion: Additive manufacturing research presents a dynamic environment and is estimated to stay presenting high productivity and broad application in the future dentistry.

Anahtar Kelimeler

3D Printing , Additive manufacturing , Bibliometrics , Dentistry

Kaynakça

• 1. Fasbinder DJ. Digital dentistry: innovation for restorative treatment. Compend Contin Educ Dent. 2010;31(4):2-12.
• 2. Zandparsa R. Digital Imaging and Fabrication. Dent Clin North Am 2014;58:135–158.
• 3. Van Noort R. The future of dental devices is digital. Dent Mater. 2012;28(1):3-12.
• 4. Beuer F, Schweiger J, Edelhoff D. Digital dentistry: an overview of recent developments for CAD/CAM generated restorations. Br Dent J. 2008;204(9):505-511.
• 5. Huang SH, Liu P, Mokasdar A, Hou L. Additive manufacturing and its societal impact: a literature review. Int J Adv Manuf Technol. 2013;67(5-8):1191-1203.
• 6. Gao W, Zhang Y, Ramanujan D, et al. The status, challenges, and future of additive manufacturing in engineering. Comput Aided Des.2015;69:65-89.
• 7. Guo N, Leu MC. Additive manufacturing: technology, applications and research needs. Front Mech Eng. 2013;8(3):215-243.
• 8. Kessler A, Hickel R, Reymus M. 3D printing in dentistry—state of the art. Oper Dent. 2020;45(1):30-40.
• 9. Tian Y, Chen C, Xu X, et al. A review of 3D printing in dentistry: technologies, affecting factors, and applications. Scanning. 2021;2021:9950131.
• 10. Donthu N, Kumar S, Mukherjee D, Pandey N, Lim WM. How to conduct a bibliometric analysis: an overview and guidelines. J Bus Res. 2021;133:285-296.
• 11. Ferrillo M, Nucci L, Sorrentino R, et al. Temporary anchorage devices in orthodontics: a bibliometric analysis of the 50 most-cited articles from 2012 to 2022. Angle Orthod. 2023;93(5591-602.
• 12. Fardi A, Kodonas K, Lillis T, Veis A. Top-cited articles in implant dentistry. Int J Oral Maxillofac Implants. 2017;32(3):555-564.
• 13. Yan B. Re: The 100 top-cited articles in orthodontics from 1975 to 2011 by Jifang Hui, Zongkai Han, Guannan Geng, Weijun Yan and Ping Shao. Angle Orthod. 2013;83(2):365.
• 14. Hui J, Han Z, Geng G, Yan W, Shao P. The 100 top-cited articles in orthodontics from 1975 to 2011. Angle Orthod. 2013;83(3):491-499.
• 15. Prevezanos P, Tsolakis AI, Christou P. Highly cited orthodontic articles from 2000 to 2015. Am J Orthod Dentofac Orthop. 2018;153(1):61-69.
• 16. Dumont JE. The bias of citations. Trends Biochem Sci. 1989;14(8):327-328.
• 17. Seglen PO. Why the impact factor of journals should not be used for evaluating research. BMJ. 1997;314(7079):497.