Development of an Automatic Liquid Dosing System in Microliter Scale

Yıl 2024, , 512 - 518, 27.09.2024

Serkan Doğanay , Kadri Emre Orgun Ömer Yüce Haydar Barış Öcal Ayberk Kıllı

https://doi.org/10.21205/deufmd.2024267819

Öz

The goal of this study is to design a novel automatic liquid dosing system for liquid sampling at the microliter level. For this purpose, a mechatronics system is designed to position a syringe at the desired position in the workspace and then drive its piston to inject the liquid to be sampled. Then, an application-specific algorithm is developed to be able to prepare samples in 3x3, 4x4, and 5x5 sample container arrays with a desired volume. The performance tests are conducted for preparing samples with up to three different liquids. The repetitive experiments are performed for 50 and 100 µL sampling volumes. The results indicated that it is possible to dose a single liquid with the highest average deviation of 3.9%. Moreover, it is found that it is possible to prepare a sample with a mixture of three liquids by the highest average deviation from the reference value of around 3.4% when the targeting sampling volume is 250 µL for each liquid.

Anahtar Kelimeler

Automatic liquid dosing, liquid sample preparation, mechatronics system design, micro-dosing

Destekleyen Kurum

Scientific and Technological Research Council of Turkey

Proje Numarası

1919B012217833

Teşekkür

This work was supported by the Scientific and Technological Research Council of Turkey in the scope of 2209A Research Project Support for Undergraduate Students Commission (grant number: 1919B012217833).

Mikrolitre Ölçeğinde Otomatik Sıvı Dozajlama Sistemi Geliştirilmesi

Öz

Bu çalışmanın amacı, mikrolitre seviyesindeki hacimlerde sıvı numunelerin hazırlanabilmesi için özgün bir otomatik bir sıvı dozajlama sistemi tasarımıdır. Bu kapsamda, belirlenen çalışma alanı içerisinde bir şırınganın pozisyonlandırılması ve içerisindeki sıvının boşaltılması için bir mekatronik sistem tasarımı yapılmıştır. Daha sonra, istenilen hacimlerdeki numunenin 3x3, 4x4 ve 5x5’lik numune kabı dizilimlerinde hazırlanabilmesi için uygulamaya özel bir algoritma geliştirilmiştir. Sistemin performansı, numune hazırlanması sırasında üç adete kadar farklı sıvılar kullanılabilecek şekilde test edilmiştir. 50 ve 100 µL numune hacimleri için tekrarlı deneyler gerçekleştirilmiştir. Elde edilen sonuçlar bir adet sıvının, en fazla %3.9’luk bir ortalama sapma ile dozajlanabileceğini göstermiştir. Ayrıca, testler üç farklı sıvı kullanılarak numune elde etmenin mümkün olduğunu göstermiştir. Bu durumda, her bir sıvıdan 250 µL’lik bir hacim alınarak oluşturulan numunenin, referans olarak verilen hacimden en fazla %3.4’lük bir ortalama sapmaya sahip olduğu gözlemlenmiştir.

Anahtar Kelimeler

Otomatik sıvı dozajlama, sıvı numune hazırlama, mekatronik sistem tasarımı, mikro dozajlama

Proje Numarası

1919B012217833

Kaynakça

• [1] Councill, E., Axtell, N.B., Truong, T., et al. 2021. Adapting a Low-Cost and Open-Source Commercial Pipetting Robot for Nanoliter Liquid Handling, SLAS Technology, Vol. 26, p. 311-319. DOI:10.1177/2472630320973591
• [2] Wu, Y.Q., Chen, H., Wang, W., He, N.Y., Liu B. 2016. Development and Validation of an Automated Liquid Handling System for Sample Preparation Based on Multichannel Air Displacement Pipetting Technology, Journal of Nanoscience and Nanotechnology, Vol. 16, p. 6867-6871. DOI:10.1166/jnn.2016.12597
• [3] Behrens, M.R., Fuller, H.C., Swist, E.R., Wu, J.W., Islam, M.M., Long, Z.C., Ruder, W.C., Steward, R. 2020. Open-source, 3D-printed Peristaltic Pumps for Small Volume Point-of-Care Liquid Handling, Scientific Reports, Vol. 10, p. 1543. DOI:10.1038/s41598-020-58246-6
• [4] Darling, C., Smith, D.A. 2021. Syringe Pump Extruder and Curing System for 3D Printing of Photopolymers, HardwareX, Vol. 9, p. e00175. DOI:10.1016/j.ohx.2021.e00175
• [5] Roth, E.A., Xu, T., Das, M., Gregory, C., Hickman, J.J., Boland, T. 2004. Inkjet Printing for High-throughput Cell Patterning, Biomaterials, Vol. 25, p. 3707-3715. DOI:10.1016/j.biomaterials.2003.10.052
• [6] Boppana, N.P.D., Snow, R.A., Simone, P.S., Emmert, G.L., Brown, M.A. 2023. Low-cost Automated Pipetting System Using a Single Board Computer and 3D-printing, Instrumentation Science & Technology, Vol. 51, p. 355-370. DOI:10.1080/10739149.2022.2129677
• [7] Kong, F.W., Yuan, L., Zheng, Y.F., Chen, W.D. 2012. Automatic Liquid Handling for Life Science: A Critical Review of the Current State of the Art, JALA: Journal of the Association for Laboratory Automation, Vol. 17, p. 169-185. DOI:10.1177/2211068211435302
• [8] Tsai N.C., Sue C.Y. 2007. Review of MEMS-based drug delivery and dosing systems, Sensors and Actuators A-Physical, Vol. 134, p. 555-564. DOI:10.1016/j.sna.2006.06.014
• [9] Tashman, J.W., Shiwarski, D.J., Feinberg, A.W. 2021. A High Performance Open-source Syringe Extruder Optimized for Extrusion and Retraction During FRESH 3D Bioprinting, HardwareX, Vol. 9, p. e00170. DOI:10.1016/j.ohx.2020.e00170
• [10] Englmann, M., Fekete, A., Gebefugi, I., Schmitt-Kopplin, P. 2007. The Dosage of Small Volumes for Chromatographic Quantifications Using a Drop-on-demand Dispenser System, Analytical and Bioanalytical Chemistry, Vol. 388, p. 1109-1116. DOI:10.1007/s00216-007-1335-7
• [11] Cheng, S., Chandra, S. 2003. A Pneumatic Droplet-on-demand Generator, Experiments in Fluids, Vol. 34, p. 755-762. DOI:10.1007/s00348-003-0629-6
• [12] Achim, W. 2006. Acoustically driven programmable microfluidics for biological and chemical applications. JALA: Journal of the Association for Laboratory Automation, Vol. 11, p. 399-405. DOI:10.1016/j.jala.2006.08.001
• [13] Lammerink, T.S.J., Elwenspoek, M., Fluitman, J.H.J. 1993. Integrated Micro-Liquid Dosing System. IEEE International Conference on Micro Electro Mechanical Systems, February 10, Fort Lauderdale, 254-259. DOI:10.1109/MEMSYS.1993.296913
• [14] Wolfgang, S. 2004. PipeJet: A Simple Disposable Dispenser for the Nano-and Microliter Range, SLAS Technology, Vol. 9, p. 300-306. DOI:10.1016/j.jala.2004.08.008
• [15] Lake, J.R., Heyde, K.C., Ruder, W.C. 2017. Low-cost Feedback-controlled Syringe Pressure Pumps for Microfluidics Applications, PLoS One, Vol. 12, p. e0175089. DOI:10.1371/journal.pone.0175089
• [16] Carvalho, M.C., Murray, R.H. 2018. Osmar, the Open-source Microsyringe Autosampler, HardwareX, Vol. 3, p. 10-38. DOI:10.1016/j.ohx.2018.01.001
• [17] Samokhin, A.S. 2020. Syringe Pump Created Using 3D Printing Technology and Arduino Platform, Journal of Analytical Chemistry, Vol. 75, p. 416-421. DOI:10.1134/s1061934820030156
• [18] Florian, D.C., Odziomek, M., Ock, C.L., Chen, H.N., Guelcher, S.A. 2020. Principles of Computer-controlled Linear Motion Applied to an Open-source Affordable Liquid Handler for Automated Micropipetting, Scientific Reports, Vol. 10, p. 13663. DOI:10.1038/s41598-020-70465-5
• [19] Barthels, F., Barthels, U., Schwickert, M., Schirmeister, T. 2020. FINDUS: An Open-Source 3D Printable Liquid-Handling Workstation for Laboratory Automation in Life Sciences, SLAS Technology, Vol. 25, p. 190-199. DOI:10.1177/2472630319877374
• [20] Torres-Acosta, M.A., Lye, G.J., Dikicioglu, D. 2022. Automated Liquid-handling Operations for Robust, Resilient, and Efficient Bio-based Laboratory Practices, Biochemical Engineering Journal, Vol. 188, p. 108713. DOI:10.1016/j.bej.2022.108713
• [21] Tweed, J.A., Gu, Z.H., Xu, H., Zhang, G.D., Nouri, P., Li, M., Steenwyk, R. 2010. Automated Sample Preparation for Regulated Bioanalysis: An Integrated Multiple Assay Extraction Platform Using Robotic Liquid Handling, Bioanalysis, Vol. 2, p. 1023-1040. DOI:10.4155/bio.10.55
• [22] Karimaghaee, P., Hosseinzadeh, A., Amidi, A., Roshandel, E. 2017. Adaptive Control Application on Syringe Pump Pressure Control Systems in Oil and Gas Industries. 5th International Conference on Control, Instrumentation, and Automation (ICCIA), November 21-23, Shiraz, 259-264. DOI:10.1109/ICCIAutom.2017.8258689
• [23] Cengel, Y., Cimbala, J. 2013. Fluid mechanics fundamentals and applications (SI units). McGraw Hill, 1000s.
• [24] Panton, R.L. 2024. Incompressible flow. John Wiley & Sons, 867s.