Investigation of Zero Adjustment and Rolling Speed Effects on Product Quality in Flat Die Thread Rolling Process

Öz

In this study, the effects of zero adjustment accuracy and operation speed on product quality were investigated through experimental and numerical analyses in the flat die thread rolling process. Experiments were conducted on M30 bolts made of 42CrMo4 steel, and corresponding finite element simulations were performed using Simufact software. The findings revealed that even slight deviations in the zero adjustment caused distortions in the thread profile. Moreover, at higher operation speeds, the loss of synchronization between the dies led to increased burr formation and surface irregularities. The results emphasize the critical importance of precise adjustment and the selection of an optimal operation speed to improve thread quality in the flat die rolling process.

Anahtar Kelimeler

• Thread Rolling
• Numerical Simulation
• Finite Elements
• Zero Setting
• Process Speed

Düz Ovalama Kalıbı ile Diş Çekme İşleminde Sıfır Ayarının ve Operasyon Hızının Ürün Kalitesine Etkilerinin İncelenmesi

Öz

Bu çalışmada, düz kalıp yöntemiyle gerçekleştirilen diş ovalama sürecinde sıfır ayarının doğruluğu ile operasyon hızının ürün kalitesi üzerindeki etkileri deneysel ve sayısal analizler yoluyla araştırılmıştır. 42CrMo4 malzemesinden üretilmiş M30 cıvatalar üzerinde yürütülen deneyler ile Simufact yazılımında gerçekleştirilen sonlu elemanlar simülasyonları karşılaştırmalı olarak değerlendirilmiştir. Bulgular, sıfır ayarındaki küçük sapmaların dahi diş formunda bozulmalara yol açtığını; ayrıca yüksek hızlarda kalıplar arasında senkronizasyonun bozulmasıyla çapaklanma ve yüzey düzensizliklerinin arttığını göstermiştir. Sonuçlar, diş ovalama prosesinde kaliteyi artırmak için hassas ayar ve optimum hız seçiminin kritik önem taşıdığını ortaya koymaktadır.

Anahtar Kelimeler

• Diş Ovalama
• Simülasyon
• Sonlu Elemanlar
• Sıfır Ayarı
• Operasyon Hızı

Kaynakça

1. Udaya K, Kishore K, Sreekrishna S. Analysis on Thread Rolling Using Flat Dies. International Research Journal of Engineering and Technology (IRJET) 2019;6(4):4632-8.
2. Claus L. New flat die thread rolling Technology. 2021. Available from: https://www.nnitraining.com/wp-content/uploads/2021/10/FW_189_E_264.pdf [Accessed 15 June 2025].
3. Onder C. Analysis of Bolt Production by Metal Forming [Master's thesis]. Ankara: Orta Doğu Teknik Üniversitesi, Fen Bilimleri Enstitüsü; 2004. Available from: https://netformmetal.com/download/Kutuphane/tezler/soguk_sekillendirme/2004_METU_Canderim_Onder_ANALYSIS_OF_BOLT_PRODUCTION_BY_METAL_FORMING.pdf.
4. Zhang S, Zheng S, Jiang Y, Ren Y, Zhang D, Lee MG. Analysis of thread rolling process using an analytical single tooth rolling model based on the slip line field theory and slab method. Journal of Manufacturing Processes 2022;76:675-86. doi:10.1016/j.jmapro.2022.02.054.
5. Kao YC, Cheng HY, She CH. Development of an integrated CAD/CAE/CAM system on taper-tipped thread-rolling die-plates. Journal of Materials Processing Technology 2006;177:98-103. doi:10.1016/j.jmatprotec.2006.04.082.
6. Hsia SY, Chou YT, Lu GF. Analysis of Sheet Metal Tapping Screw Fabrication Using a Finite Element Method. Applied Sciences 2016;6:300. doi:10.3390/app6100300.
7. Domblesky JP, Feng F. A parametric study of process parameters in external thread rolling. Journal of Materials Processing Technology 2002;121:341-9. doi:10.1016/S0924-0136(01)01223-7.
8. O’Connell M, Painter B, Maul G, Taylan A. Flashless closed-die upset forging-load estimation for optimal cold header selection. J Mater Process Technol 1996;59:81-94. doi:10.1016/0924-0136(96)02289-3.

9. Kim H, Altan T. Cold forging of steel-practical examples of computerized part and process design. J Mater Process Technol 1996;59:122-31. doi:10.1016/0924-0136(96)02293-5.
10. Vazquez V, Hannan D, Altan T. Tool life in cold forging–example of design improvement to increase service life. J Mater Process Technol 2000;98:90-6. doi:10.1016/S0924-0136(99)00309-X.
11. Falk B, Engel U, Geiger M. Fundamental aspects for the evaluation of the fatigue behavior of cold forging tools. J Mater Process Technol 2001;119:158-64. doi:10.1016/S0924-0136(01)00934-7.
12. Janicek L, Petruska J, Maros B, Rusz S. Cold forming of bolts without thermal treatment. J Mater Process Technol 2002;125-126:341-6. doi:10.1016/S0924-0136(02)00296-0.
13. Min D, Kim M. A study on precision cold forging process improvements for the steering yoke ofgid–plastic finite-element method. J Mater Process Technol 2003;138:339-42. doi:10.1016/S0924-0136(03)00095-5.
14. Murthy PLS, Patil H, Sarada BN. Analysis of Roller Speed and Roller Diameter – A Review. International Journal of Advances in Engineering Research 2016;11(III):1-5.
15. Aktas S, Kisioglu Y. Effects of Thread Rolling Processing Parameters on Mechanical Properties and Microstructures of High-Strength Bolts. Materials Testing 2020;62(10):1017-24. doi:10.3139/120.111579.
16. Kukiełka K. Application of the FEM Method to Modeling and Analysis of the Cold Thread Rolling Process—Part 1: Conditions for Ensuring a Plane State of Deformations. Materials 2023;16(13):4647. doi:10.3390/ma16134647.
17. Volz S, Groche P. Experimental investigation on slip conditions during thread rolling with flat dies. Friction 2024;12(1):136-43. doi:10.1007/s40544-023-0753-7.
18. Brutti C, Groth C, Biancolini ME. A fast analytical method for elastic–plastic analysis of threaded connections. Applied Mechanics 2025;6(2):42. doi:10.3390/applmech6020042.
19. Groche P, Kramer P. Numerical investigation of the influence of frictional conditions in thread rolling operations with flat dies. Int J Material Forming 2018;11(4):687-703. doi:10.1007/s12289-017-1383-2.
20. Domblesky JP, Feng F. A parametric study of process parameters in external thread rolling. JMPT 2002;121:341-9. doi:10.1016/S0924-0136(01)01223-7.
21. Popova E, Popov V. The research works of Coulomb and Amontons and generalized laws of friction. Friction 2015;3(2):183-90. doi:10.1007/s40544-015-0074-6.