EFFECT OF CONFIGURATION OF SHEAR WALLS AT FLOOR PLAN TO EARTHQUAKE BEHAVIOR OF SHEAR WALL-FRAME REINFORCED CONCRETE BUILDINGS

Öz

Shear walls are widely used to resist lateral load such as wind and earthquake and to limit interstory drifts in multistory reinforced concrete buildings. Configurations of sher walls at floor plan are generally developed due to architectural design. That configuration and shear areas of shear walls play a significant role in earthquake behavior of them. In this study, the effects of configurating symmetric shear walls with rectangular sections on interior or exterior axes to earthquake behavior of shear wall-frame buildings are investigated. Two eight-story reinforced concrete shear wall-frame buildings having the same floor plan are designed according to Turkish Seismic Code. Shear walls are configurated on interior axes of the first building and on exterior axes of the second building.Base shear forces, sustained by shear walls, interstory drifts and furthermore torsional irregularity factors for 5% additional eccentricity are calculated by linear elastic analysis of both buildings. The comparison of these values and related suggestions are made for two different configurations.

Anahtar Kelimeler

• Reinforced concrete shear walls, Configuration of shear walls at floor plan, Linear elastic analysis, Base shear force, Interstory drift, Torsional irregularity factor

PLANDA PERDE YERLEŞİMİNİN BETONARME PERDE-ÇERÇEVELİ BİNALARIN DEPREM DAVRANIŞINA ETKİSİ

Öz

in multistory reinforced concrete buildings. Configurations of sher walls at floor plan are generally developed due to architectural design. That configuration and shear areas of shear walls play a significant role in earthquake behavior of them. In this study, the effects of configurating symmetric shear walls with rectangular sections on interior or exterior axes to earthquake behavior of shear wall-frame buildings are investigated. Two eight-story reinforced concrete shear wall-frame buildings having the same floor plan are designed according to Turkish Seismic Code. Shear walls are configurated on interior axes of the first building and on exterior axes of the second building.Base shear forces, sustained by shear walls, interstory drifts and furthermore torsional irregularity factors for 5% additional eccentricity are calculated by linear elastic analysis of both buildings. The comparison of these values and related suggestions are made for two different configurations

Anahtar Kelimeler

• Betonarme perdeler, Perdelerin kat planında yerleşimi, Doğrusal elastik analiz, Taban kesme kuvveti, Göreli kat ötelemesi, Burulma düzensizliği katsayısı

Kaynakça

1. Aka İ., Keskinel F., Çılı F., Çelik O. C. (2001): “Betonarme”, İstanbul, Birsen Yayınevi.
2. Atımtay E. (2000): “Açıklamalar ve Örneklerle Afet Bölgelerinde Yapılacak Binalar Hakkında Yönetmelik”, Ankara, Bizim Büro Basımevi.
3. Atımtay E. (2001): “Çerçeveli ve Perdeli Betonarme Sistemlerin Tasarımı: Temel Kavramlar ve Hesap Yöntemleri”, Ankara, Bizim Büro Basımevi.
4. Bayülke N. (2001): “Depreme Dayanıklı Betonarme ve Yığma Yapı Tasarımı”, İzmir, TMMOB İnşaat Mühendisleri Odası İzmir Şubesi Yayın No:27.
5. Celep Z., Kumbasar N. (2004): “Deprem Mühendisliğine Giriş ve Depreme Dayanıklı Yapı Tasarımı”, İstanbul, Beta Dağıtım.
6. Celep Z., Kumbasar N. (2005): “Betonarme Yapılar”, İstanbul, Beta Dağıtım.
7. CSI (2003): “SAP2000 Static and Dynamic Finite Element Analysis of Structures v.8.2.3”, Computers and Structures Inc., Berkeley, California.
8. Doğangün A. (2007): “Betonarme Yapıların Hesap ve Tasarımı”, İstanbul, Birsen Yayınevi.

9. DBYBHY (2007): “Deprem Bölgelerinde Yapılacak Binalar Hakkında Yönetmelik”, Ankara, Bayındırlık ve İskan Bakanlığı.
10. Ghobarah A., Youssef M. (1999): “Modelling of Reinforced Concrete Structural Walls”, Engineering Structures, Cilt 21, Sayı 10, s.912-923.
11. Kubin J., Fahjan Y. M., Tan M. T. (2008): “Comparison of Practical Approaches for Modelling Shearwalls in Structural Analyses of Buildings”, Beijing, The 14th World Conference on Earthquake Engineering.
12. Kwak H. G., Kim D. Y. (2001): “Nonlinear Analysis of RC Shear Walls Considering Tension-Stiffening Effect”, Computers and Structures, Cilt 79, Sayı 5, s.499-517.
13. Mazars J., Kotronis P., Davenne L. (2002): “A New Modelling Strategy for the Behaviour of Shear Walls Under Dynamic Loading”, Earthquake Engineering and Structural Dynamics, Cilt 31, Sayı 4, s. 937-954.
14. Öztürk T. (2005): “Betonarme Binalarda Deprem Perdelerinin Yerleşimi ve Tasarımı”, İstanbul, İMO İstanbul Şubesi İlkbahar-Yaz Dönemi Meslekiçi Eğitim Kursları.
15. Tekel H. (2006): “Betonarme Yapılarda % 1 Oranında Perde Kullanımının Değerlendirilmesi”, Türkiye Mühendislik Haberleri, Sayı 444-445, s.57-63.
16. TS500 (2000): “Betonarme Yapıların Tasarım ve Yapım Kuralları”, Ankara, Türk Standartları Enstitüsü.