Investigation of SiO2 Coatings Synthesized by Acid and Base Catalysis Sol-Gel Dip Coating Technique
Öz
Present study deals with the effect of acid and base catalysis on SiO2 coating properties that were synthesized by sol-gel dip coating technique. Microstructural properties of the coatings were characterized by SEM and EDS was used to determine the coating composition. Spectrophotometer has been used to measure the optical properties of the coatings. The results demonstrated that SiO2 coatings deposited by both acid and base catalysis sol-gel dip coating technique were homogeneous and well-adherent. Acid catalyzed SiO2 coatings resulted with dense and smooth surface morphologies whereas base catalyzed SiO2 coatings had nanoporous structure with nanovoids ranging between 15-30 nm. According to the optical analyses, SiO2 coatings have very high transmittance values demonstrating that they are highly transparent especially in the visible light range.
Anahtar Kelimeler
Kaynakça
- [1]Chen, D. 2001. Anti-reflection (AR) coatings made by sol–gel processes: A review, Solar Energy Materials and Solar Cells, Cilt. 68, s. 313-336. DOI: 10.1016/S0927-0248(00)00365-2
- [2] Alam, M.J., Cameron, D.C. 2001. Characterization of transparent conductive ITO thin films deposited on titanium dioxide film by a sol–gel process, Surface and Coating Technology, Cilt. 776, s. 142-144. DOI: 10.1016/S0257-8972(01)01183-5
- [3] Bhatt, V., Chandra, S. 2007. Silicon dioxide films by RF sputtering for microelectronic and MEMS applications, Journal of Micromechanics and Microengineering, Cilt. 17, s. 1066-1077. DOI: 10.1088/0960-1317/17/5/029
- [4] Gombert, A., Glaubitt, W., Rose, K., Dreibholz, C., Zankea, C., Blasi, B., Heinzel, A., Horbelt, W., Sporn, D., Döll, W., Wittwer, V., Luther, J. 1998. Glazing with very high solar transmittance, Solar Energy, Cilt. 62, s. 177-188. DOI: 10.1016/S0038-092X(98)00008-5
- [5] Nostell, P., Roos, A., Karlsson, B. 1999. Optical and mechanical properties of sol-gel antireflective films for solar energy applications, Thin Solid Films, Cilt. 351, s.170-175. DOI: 10.1016/S0040-6090(99)00257-6
- [6] Choudhary, S., Singh, M., Kale, R.K. 2013. Surfactant-catalyzed SiO2 thin films preparation and characterization, Journal of Adhesion Science and Technology, Cilt. 27, s. 2629-2641. DOI: 10.1080/01694243.2013.797857
- [7] Garcı́a-Cerda, L.A., Pérez-Roblez, J.F., González-Hernández, J., Mendoza-Galván, A., Vorobiev, Y.V., Prokhorov, E.F. 2000. Dielectric properties of SiO2 thin films prepared by the sol-gel technique, Journal of Vacuum Science & Technology B, Cilt. 18, s. 288-292. DOI: 10.1116/1.591185
- [8] Marsal, A., Ansart, F., Turq, V., Bonino, J.P., Sobrino, J.M., Chen, Y.M., Garcia, J. 2013. Mechanical properties and tribological behavior of a silica or/and alumina coating prepared by sol-gel route on stainless steel, Surface and Coating Technology, Cilt. 237, s. 234–240. DOI: 10.1016/j.surfcoat.2013.06.037
Ayrıntılar
Birincil Dil
İngilizce
Konular
Mühendislik
Bölüm
Araştırma Makalesi
Yazarlar
Yayımlanma Tarihi
20 Eylül 2019
Gönderilme Tarihi
9 Ekim 2017
Kabul Tarihi
27 Haziran 2019
Yayımlandığı Sayı
Yıl 2019 Cilt: 21 Sayı: 63