Malahit yeşili boyar maddesinin çam kozalağı ile adsorpsiyonunun Taguchi metodu ile incelenmesi

Öz

Bu çalışmada Taguchi deney tasarımı kullanılarak Kars-Sarıkamış ormanlarından toplanan çam kozalakları ile malahit yeşilinin adsorpsiyonunun optimizasyonu çalışıldı. Adsorpsiyon üzerine etki edebilecek parametreler, temas süresi, başlangıç konsantrasyonu, başlangıç pH’ ı ve tane boyutu olarak seçildi. Optimum seviyeler sırasıyla temas süresi 240 dk, başlangıç konsantrasyonu 100 mg.L-1, pH 5 ve tane boyutu (-425+300) olarak belirlendi. Optimum şartlarda maksimum adsorplanan malahit yeşili miktarı 9,72 mg/g olarak bulunmuştur. Proses parametrelerinin etkisini görmek için ANOVA analizi yapıldı ve başlangıç konsantrasyonu, başlangıç pH’ı ve tane boyutunun etkin olduğu saptandı.

Anahtar Kelimeler

• adsorpsiyon
• Taguchi
• ANOVA
• Malahit yeşili
• Çam kozalağı

Investigation of adsorption of malachite green dye on pine cone using Taguchi method

Öz

In this study, optimization of adsorption of malachite green on pine cones collected from Kars-Sarıkamış forest was studied using Taguchi experimental design. Contact time,initial concentration, initial pH and particle size were selected as affecting adsorption parameters . Optimum levels for adsorption experiments were determined as contact time=240 min, initial concentration=100 mg L-1, pH=5, and particle size = (-425+300), respectively. At optimum levels, the amount of maximum adsorbed malachite green was found to be 9,72 mg/g. ANOVA analysis was performed to understand the effect of process parameters and initial concentration, initial pH and particle size were found to be effective.

Anahtar Kelimeler

• adsorption
• Taguchi
• ANOVA
• Malachite green
• pine cone

Kaynakça

1. [1] J. Erkmen, “The use of hydroxyethyl cellulose as a transparent filling material in finishing polish”, Pigment & Resin Technology, Tem. 2018, doi: 10.1108/PRT-06-2017-0060.
2. [2] O. Korkut, E. Sayan, O. Lacin, ve B. Bayrak, “Investigation of adsorption and ultrasound assisted desorption of lead (II) and copper (II) on local bentonite: A modelling study”, Desalination, c. 259, sy 1, ss. 243-248, Eyl. 2010, doi: 10.1016/j.desal.2010.03.045.
3. [3] S. D. Khattri ve M. K. Singh, “Removal of malachite green from dye wastewater using neem sawdust by adsorption”, Journal of Hazardous Materials, c. 167, sy 1, ss. 1089-1094, Ağu. 2009, doi: 10.1016/j.jhazmat.2009.01.101.
4. [4] I. D. Mall, V. C. Srivastava, N. K. Agarwal, ve I. M. Mishra, “Adsorptive removal of malachite green dye from aqueous solution by bagasse fly ash and activated carbon-kinetic study and equilibrium isotherm analyses”, Colloids and Surfaces A: Physicochemical and Engineering Aspects, c. 264, sy 1, ss. 17-28, Ağu. 2005, doi: 10.1016/j.colsurfa.2005.03.027.
5. [5] S. Srivastava, R. Sinha, ve D. Roy, “Toxicological effects of malachite green”, Aquatic Toxicology, c. 66, sy 3, ss. 319-329, Şub. 2004, doi: 10.1016/j.aquatox.2003.09.008.
6. [6] O. Lacin, B. Bayrak, O. Korkut, ve E. Sayan, “Modeling of adsorption and ultrasonic desorption of cadmium(II) and zinc(II) on local bentonite”, Journal of Colloid and Interface Science, c. 292, sy 2, ss. 330-335, Ara. 2005, doi: 10.1016/j.jcis.2005.05.092.
7. [7] M. A. Ahmad ve R. Alrozi, “Removal of malachite green dye from aqueous solution using rambutan peel-based activated carbon: Equilibrium, kinetic and thermodynamic studies”, Chemical Engineering Journal, c. 171, sy 2, ss. 510–516, 2011.
8. [8] O. Lacin, A. Haghighatnia, F. Demir, F. Sevim, ve O. laçin, Adsorption Characteristics and Behaviors of Natural Red Clay for Removal of BY28 from Aqueous Solutions, c. Volume-3. 2019.

9. [9] J. Zolgharnein, N. Asanjarani, ve T. Shariatmanesh, “Taguchi L16 orthogonal array optimization for Cd (II) removal using Carpinus betulus tree leaves: Adsorption characterization”, International Biodeterioration & Biodegradation, c. 85, ss. 66-77, Kas. 2013, doi: 10.1016/j.ibiod.2013.06.010.
10. [10] G. Durán-Jiménez, V. Hernández-Montoya, M. A. Montes-Morán, A. Bonilla-Petriciolet, ve N. A. Rangel-Vázquez, “Adsorption of dyes with different molecular properties on activated carbons prepared from lignocellulosic wastes by Taguchi method”, Microporous and Mesoporous Materials, c. 199, ss. 99-107, Kas. 2014, doi: 10.1016/j.micromeso.2014.08.013.
11. [11] R. Pundir, G. H. V. C. Chary, ve M. G. Dastidar, “Application of Taguchi method for optimizing the process parameters for the removal of copper and nickel by growing Aspergillus sp.”, Water Resources and Industry, c. 20, ss. 83-92, Ara. 2018, doi: 10.1016/j.wri.2016.05.001.
12. [12] M. P. Elizalde-González ve L. E. García-Díaz, “Application of a Taguchi L16 orthogonal array for optimizing the removal of Acid Orange 8 using carbon with a low specific surface area”, Chemical Engineering Journal, c. 163, sy 1, ss. 55-61, Eyl. 2010, doi: 10.1016/j.cej.2010.07.040.
13. [13] J. A. Fernández-López, J. M. Angosto, M. J. Roca, ve M. Doval Miñarro, “Taguchi design-based enhancement of heavy metals bioremoval by agroindustrial waste biomass from artichoke”, Science of The Total Environment, c. 653, ss. 55-63, Şub. 2019, doi: 10.1016/j.scitotenv.2018.10.343.
14. [14] J. Zolgharnein ve M. Rastgordani, “Optimization of simultaneous removal of binary mixture of indigo carmine and methyl orange dyes by cobalt hydroxide nano-particles through Taguchi method”, Journal of Molecular Liquids, c. 262, ss. 405-414, Tem. 2018, doi: 10.1016/j.molliq.2018.04.038.
15. [15] M. Rahmani, M. Kaykhaii, ve M. Sasani, “Application of Taguchi L16 design method for comparative study of ability of 3A zeolite in removal of Rhodamine B and Malachite green from environmental water samples”, Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, c. 188, ss. 164-169, Oca. 2018, doi: 10.1016/j.saa.2017.06.070.
16. [16] B. Bayrak, O. Laçin, ve H. Saraç, “HAM MANYEZİT CEVHERİNİN GLUKONİK ASİT ÇÖZELTİLERİNDE ÇÖZÜNDÜRÜLMESİNİN OPTİMİZASYONU”, Anadolu Üniversitesi Bilim Ve Teknoloji Dergisi A - Uygulamalı Bilimler ve Mühendislik, c. 16, sy 2, ss. 195-202, Kas. 2015, doi: 10.18038/btd-a.35162.
17. [17] H. Rezaei, M. Haghshenasfard, ve A. Moheb, “Optimization of dye adsorption using Fe3O4 nanoparticles encapsulated with alginate beads by Taguchi method”, Adsorption Science & Technology, c. 35, sy 1-2, ss. 55-71, Mar. 2017, doi: 10.1177/0263617416667508.
18. [18] H. Serencam ve M. Uçurum, “Taguchi deney tasarımı kullanılarak uçucu kül ile Ni (II) gideriminde bazı adsorpsiyon parametrelerinin etkinliğinin irdelenmesi”, Performance evaluation of adsorption properties for Ni (II) removal with flying ash using taguchi experimental design, 2019.
19. [19] S. H. Dhawane, T. Kumar, ve G. Halder, “Biodiesel synthesis from Hevea brasiliensis oil employing carbon supported heterogeneous catalyst: Optimization by Taguchi method - ScienceDirect”. [Çevrimiçi]. Erişim adresi: https://www.sciencedirect.com/science/article/pii/S0960148115305310. [Erişim: 26-Ara-2019].
20. [20] C. E. Yılmaz, M. A. A. Aslani, ve C. K. Aslani, “Helianthus Annuus Çekirdeği Kabuklarında Toryum Sorpsiyonunun Taguchi Metodu Kullanılarak İncelenmesi”, Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi, c. 21, sy 63, ss. 741-747, Eyl. 2019.