Kısa Bir İnceleme: Biyo-Kompozit Malzemelerde Bazı Bitki Bazlı Yağlarla Oluşturulan Matris Reçinelerin Kullanımı ve Uygulaması

Yıl 2024, Cilt: 12 Sayı: 3, 1315 - 1333, 31.07.2024

Berkay Karacor , Mustafa Özcanlı

https://doi.org/10.29130/dubited.1265905

Öz

Artan çevre sorunları, atık geri dönüşüm sorunu ve biyolojik olarak parçalanamayan kaynaklar son yıllarda araştırmacıları farklı kompozit malzeme arayışlarına yöneltmiştir. Bu çalışmalarda, malzeme üretiminde geleneksel malzemelerin yerini alma potansiyeli nedeniyle yeşil kompozitler olarak bilinen biyo-kompozit malzemelere olan ilgi önemli ölçüde artmıştır. Sentetik lifler ve sentetik reçineler yerine doğal liflerden veya doğal reçinelerden biyokompozit malzemelerin oluşturulması, doğal kaynakları araştırmacıların odak noktası haline getirmiştir. Bu doğal reçine oluşumları arasında bitkisel bazlı yağların düşük maliyeti, biyolojik olarak parçalanabilirliği ve bulunabilirliği nedeniyle çeşitli uygulamalarda kullanımı sık görülmeye başlanmıştır. Bitkisel bazlı yağlar geri dönüştürülebilir olmasının yanı sıra çok çeşitli kimyasal dönüşüm olanakları ile başta kimya sektörü olmak üzere birçok sektörde hem çevresel hem de ekonomik olarak önemli bir alternatiftir. Yağ asitleri ve gliserol esterin karmaşık çok bileşenli karışımlarından oluşan bitkisel yağ bileşenlerinin çok yönlülüğünü keşfetme isteği bu alandaki çalışmaları daha da hızlandırmaktadır. Bu çalışmada farklı reçinelerle bitkisel yağların kimyasal bileşimleri, bitkisel yağların kimyasal yapıları, bu bitkisel yağlar arasında hangi çeşitlerin ön planda olduğu ve bitkisel yağ bazlı reçineler kullanılarak üretilen çeşitli biyokompozit türleri incelenmiştir. Ayrıca bu biyokompozitlerin başta otomotiv olmak üzere diğer uygulamalardaki son trendlerin neler olduğu incelenmiştir.

Anahtar Kelimeler

Kompozitler, Biyokompozitler, Matris, Bitkisel yağlar

A Short Review: The Use and Application of Matrix Resins Formed with Some Plant-Based Oils in Bio-Composite Materials

Öz

Increasing environmental problems, waste recycling problems, and non-biodegradable resources have led researchers to different searches for composite materials in recent years. In these studies, interest in bio-composite materials known as green composites has increased significantly due to their potential to replace traditional materials in material production. The creation of biocomposite materials from natural fibers or natural resins instead of synthetic fibers and synthetic resins has made natural resources the focus of researchers. Among these natural resin formations, the use of vegetable-based oils in various applications has started to be seen frequently due to their low cost, biodegradability, and availability. In addition to being recyclable, vegetable-based oils are an important alternative in many sectors, especially in the chemical industry, both environmentally and economically, with a wide variety of chemical conversion possibilities. The desire to explore the versatility of vegetable oil components formed by the complex multi-component mixtures of fatty acids and glycerol ester accelerates the studies in this field even more. In this study, the chemical compositions of vegetable oils hybridized with different resins, the chemical structures of pure vegetable oils, the different varieties among these vegetable oils, and various types of biocomposites produced using vegetable oil-based resins were investigated. In addition, the latest trends in other applications of these bio-composites, especially in automotive, were examined.

Anahtar Kelimeler

Composites, Bio-composites, Matrix, Vegatable oils

Kaynakça

• [1] Ş. Yıldızhan, A. Çalık, M. Özcanlı, and H. Serin, “Bio-composite materials: a short review of recent trends, mechanical and chemical properties, and applications,” European Mechanical Science, vol. 2, no. 3, pp. 83–91, Sep. 2018.
• [2] A. I. Taub, “Automotive materials: Technology trends and challenges in the 21st century,” MRS Bulletin, vol. 31, no. 4, pp. 336–343, Apr. 2006.
• [3] L. Jiang, “A new manufacturing process for biocomposite sandwich parts using a myceliated core, natural reinforcement and infused bioresin,” Ph.D. dissertation, Department of Mechanical Engineering, Rensselaer Polytechnic Institute, New York, USA, 2015.
• [4] R. Almaguer, A. Clark, and N. Odea. (2017, June) Growth opportunities in the global composites industry (1st ed.) [Online] . Avaliable:https://www.innovationintextiles.com/uploads/7623/Growth_Opportunities_in_the_Global_Composites_Industry_reprot_features.pdf., 2017.
• [5] R. Lalit, P. Mayank, and K. Ankur, “Natural fibers and biopolymers characterization: A future potential composite material,” Journal of Mechanical Engineering, vol. 68, no. 1, pp. 33–50, Apr. 2018.
• [6] D. N. Saheb and J. P. Jog, “Natural fiber polymer composites: A review,” Advances in Polymer Technology, vol. 18, no. 4, pp. 351–363, 1999.
• [7] M. F. Rosa, B. Chiou, E. S. Medeiros, D. F. Wood, L. H. C. Mattoso, W. J. Orts, and S. H. Imam, “Biodegradable composites based on starch/EVOH/glycerol blends and coconut fibers,” Journal of Applied Polymer Science, vol. 111, no. 2, pp. 612-618, 2009.
• [8] N. P. G. Suardana, I. P. Lokantara, and J. K. Lim, “Influence of water absorption on mechanical properties of coconut coir fiber/poly-lactic acid biocomposites,” Materials Physics and Mechanics, vol. 12, no. 2, pp. 113–125, 2011.
• [9] S. Özkür, H. Sezgin, and İ. Yalçın Eniş, “Artan biyo - reçine oranının jüt takviyeli epoksi kompozitlerin darbe davranışına etkisi,” in Ulusal Çukurova Tekstil Kongresi-UÇTEK’2019, pp. 430–435, 2019.
• [10] O. Faruk, A. K. Bledzki, H. P. Fink, and M. Sain, “Progress report on natural fiber reinforced composites,” Macromolecular Materials Engineering, vol. 299, no. 1, pp. 9–26, Jan. 2014.
• [11] A. K. Bledzki, S. Reihmane, and J. Gassan, “Properties and modification methods for vegetable fibers for natural fiber composites,” Journal of Applied Polymer Science, vol. 59, no. 8, pp. 1329–1336, Feb. 1996.
• [12] G. Oner, “Doğal atıkların kompozit malzeme olarak kullanım olanakları,” Mühendislikte Güncel Araştırmalar,1.baskı. Ankara, Türkiye: Gece Kitaplığı, 2022, böl.9,ss. 131–144.
• [13] O. Faruk, A. K. Bledzki, H. P. Fink, and M. Sain, “Biocomposites reinforced with natural fibers: 2000–2010,” Progress in Polymer Science, vol. 37, no. 11, pp. 1552–1596, Nov. 2012.
• [14] F. Sarasini, J. Tirillò , L. Ferrante , M. Valente , T. Valente , L. Lampani , P. Gaudenzi , S. Cioffi, S. Iannace, L. Sorrentino, “Drop-weight impact behaviour of woven hybrid basalt–carbon/epoxy composites,” Composites Part B Engineering, vol. 59, pp. 204–220, Mar. 2014.
• [15] A. Hernandez-Estrada, J. Müssig, and M. Hughes, “The impact of fibre processing on the mechanical properties of epoxy matrix composites and wood-based particleboard reinforced with hemp (Cannabis sativa L.) fibre,” Journal of Materails Science, vol. 57, pp. 1738–1754, 2022.
• [16] R. Auvergne, S. Caillol, G. David, B. Boutevin, and J. P. Pascault, “Biobased thermosetting epoxy: Present and future,” Chemical Reviews, vol. 114, no. 2, pp. 1082–1115, Jan. 2014.
• [17] T. Väisänen, O. Das, and L. Tomppo, “A review on new bio-based constituents for natural fiber-polymer composites,” Journal of Cleaner Production, vol. 149, pp. 582–596, Apr. 2017.
• [18] S. Bahar Basturk and S. Celik Erbas, “Mechanical and thermo-mechanical properties of nanoclay/epoxy composites: Synergistic effects of silanization and surfactant application,” Materials Research Express, vol. 5, no.9, pp. 095017, 2018.
• [19] S. K. Sahoo, V. Khandelwal, and G. Manik, “Influence of epoxidized linseed oil and sisal fibers on structure-property relationship of epoxy biocomposite,” Polymer Composites, vol. 39, no. S4, pp. E2595–E2605, Dec. 2018.
• [20] M. B. A. Bakar, M. N. Masri, M. H. M. Amini, M. Z. M. Thirmizir, and M. S. Salim, “Mechanical, thermal and morphological properties of epoxy resin toughened with epoxidized soybean oil,” in AIP Conference Proceedings, vol. 2030, p. 020277, 2018.
• [21] M. Haq, R. Burgueño, A. K. Mohanty, and M. Misra, “Hybrid bio-based composites from blends of unsaturated polyester and soybean oil reinforced with nanoclay and natural fibers,” Composites Science and Technology, vol. 68, no. 15–16, pp. 3344–3351, Dec. 2008.
• [22] L. Jianga, D. F. Walczyk, and G. McIntyre, “Vaccum infusion of mycelium-bound biocomposite preforms with natural resins,” in CAMX – The Composites and Advanced Materials Expo, no. November, pp.13-16, 2016.
• [23] K. Senthilkumar, M. Chandrasekar, O. Y. Alothman, H. Fouad, M. Jawaid, and M. A. Azeem, “Flexural, impact and dynamic mechanical analysis of hybrid composites: Olive tree leaves powder/ pineapple leaf fibre/epoxy matrix,” Journal of Materials Research and Technology, vol.21, pp. 4241-4252, November-December, 2022.
• [24] N. Reddy and Y. Yang, “Biocomposites developed using water-plasticized wheat gluten as matrix and jute fibers as reinforcement,” Polymer International, vol. 60, no. 4, pp. 711–716, Apr. 2011.
• [25] Anonymous. (2012, Dec.) Biocomposites (1 st ed.) [Online]. Avaliable: http://yudysi.lecture.ub.ac.id/files/2012/12/MaterialBaru09thBiocomposites.pdf. 2012.
• [26] S. Grishchuk and J. Karger-Kocsis, “Hybrid thermosets from vinyl ester resin and acrylated epoxidized soybean oil (AESO),” Express Polymer Letters, vol. 5, no. 1, pp. 2–11, 2011.
• [27] N. Boquillon, “Use of an epoxidized oil-based resin as matrix in vegetable fibers-reinforced composites,” Journal of Applied Polymer Science, vol. 101, no. 6, pp. 4037–4043, Sep. 2006.
• [28] J. D. Espinoza-Perez, B. A. Nerenz, D. M. Haagenson, Z. Chen, C. A. Ulven, and D. P. Wiesenborn, “Comparison of curing agents for epoxidized vegetable oils applied to composites,” Polymer Composites, vol. 32, no. 11, pp. 1806–1816, Nov. 2011.
• [29] L. Montero de Espinosa and M. A. R. Meier, “Plant oils: The perfect renewable resource for polymer science?!,” European Polymer Journal, vol. 47, no. 5, pp. 837–852, May 2011.
• [30] J.-M. Raquez, M. Deléglise, M.-F. Lacrampe, and P. Krawczak, “Thermosetting (bio)materials derived from renewable resources: A critical review,” Progress in Polymer Science, vol. 35, no. 4, pp. 487–509, Apr. 2010.
• [31] M. A. Mosiewicki and M. I. Aranguren, “A short review on novel biocomposites based on plant oil precursors,” European Polymer Journal, vol. 49, no. 6, pp. 1243–1256, Jun. 2013.
• [32] A. Gandini, “Polymers from renewable resources: A challenge for the future of macromolecular materials,” Macromolecules, vol. 41, no. 24, pp. 9491–9504, Dec. 2008.
• [33] M. Mercangöz, S. Küsefoğlu, U. Akman, and Ö. Hortaçsu, “Polymerization of soybean oil via permanganate oxidation with sub/supercritical CO2,” Chemical Engineering and Processing, vol. 43, no. 8, pp. 1015–1027, Aug. 2004.
• [34] F. Seniha Güner, Y. Yağcı, and A. Tuncer Erciyes, “Polymers from triglyceride oils,” Progress in Polymer Science, vol. 31, no. 7, pp. 633–670, Jul. 2006.
• [35] M. A. R. Meier, J. O. Metzger, and U. S. Schubert, “Plant oil renewable resources as green alternatives in polymer science,” Chemical Society Reviews, vol. 36, no. 11, p. 1788, 2007.
• [36] S. K. Sahoo, S. Mohanty, and S. K. Nayak, “Mechanical, dynamic mechanical, and interfacial properties of sisal fiber-reinforced composite with epoxidized soybean oil-based epoxy matrix,” Polymer Composites, vol. 39, no. 6, pp. 2065–2072, Jun. 2018.
• [37] J. C. Ronda, G. Lligadas, M. Galià, and V. Cádiz, “A renewable approach to thermosetting resins,” Reactive & Functional Polymers, vol. 73, no. 2, pp. 381–395, Feb. 2013.
• [38] R. A. Holser, “Transesterification of epoxidized soybean oil to prepare epoxy methyl esters,” Industrial Crops and Products, vol. 27, no. 1, pp. 130–132, Jan. 2008.
• [39] L. Marrot, A. Bourmaud, P. Bono, and C. Baley, “Multi-scale study of the adhesion between flax fibers and biobased thermoset matrices,” Materials Design, vol. 62, pp. 47–56, Oct. 2014.
• [40] P. Niedermann, G. Szebényi, and A. Toldy, “Effect of epoxidized soybean oil on mechanical properties of woven jute fabric reinforced aromatic and aliphatic epoxy resin composites,” Polymer Composites, vol. 38, no. 5, pp. 884–892, May 2017.
• [41] X. Pan, P. Sengupta, and D. C. Webster, “Novel biobased epoxy compounds: Epoxidized sucrose esters of fatty acids,” Green Chemistry, vol. 13, no. 4, p. 965, 2011.
• [42] Z. S. Petrović, A. Zlatanić, C. C. Lava, and S. Sinadinović-Fišer, “Epoxidation of soybean oil in toluene with peroxoacetic and peroxoformic acids— kinetics and side reactions,” European Journal of Lipid Science Technology, vol. 104, no. 5, pp. 293–299, May 2002.
• [43] H. Patil and J. Waghmare, “Catalyst for epoxidation of oils: a review,” Discovery, vol. 3, no. 7, pp. 10–14, 2013.
• [44] S. Dinda, A. V. Patwardhan, V. V. Goud, and N. C. Pradhan, “Epoxidation of cottonseed oil by aqueous hydrogen peroxide catalysed by liquid inorganic acids,” Bioresource Technology, vol. 99, no. 9, pp. 3737–3744, Jun. 2008
• [45] N. L. Parada Hernandez, A. J. Bonon, J. O. Bahú, M. I. R. Barbosa, M. R. Wolf Maciel, and R. M. Filho, “Epoxy monomers obtained from castor oil using a toxicity-free catalytic system,” Journal of Molecular Catalysis A: Chemical, vol. 426, pp. 550–556, Jan. 2017.
• [46] H. Esen, S. Küsefoğlu, and R. Wool, “Photolytic and free-radical polymerization of monomethyl maleate esters of epoxidized plant oil triglycerides,” Journal of Applied Polymer Science, vol. 103, no. 1, pp. 626–633, Jan. 2007.
• [47] D. Åkesson, M. Skrifvars, and P. Walkenström, “Preparation of thermoset composites from natural fibres and acrylate modified soybean oil resins,” Journal of Applied Polymer Science, vol. 114, no. 4, pp. 2502–2508, Nov. 2009.
• [48] W. Liu, T. Chen, M. Fei, R. Qiu, D. Yu, T. Fu, J. Qiu, “Properties of natural fiber-reinforced biobased thermoset biocomposites: Effects of fiber type and resin composition,” Composites Part B Engineering, vol. 171, no. March, pp. 87–95, Aug. 2019.
• [49] E. Can, S. Küsefoğlu, and R. P. Wool, “Rigid, thermosetting liquid molding resins from renewable resources. I. Synthesis and polymerization of soy oil monoglyceride maleates,” Journal of Applied Polymer Science, vol. 81, no. 1, pp. 69–77, Jul. 2001.
• [50] S. K. Sahoo, S. Mohanty, and S. K. Nayak, “Study on the effect of woven sisal fiber mat on mechanical and viscoelastic properties of petroleum based epoxy and bioresin modified toughened epoxy network,” Journal of Applied Polymer Science, vol. 132, no. 43, p. 42699, Nov. 2015.
• [51] S. K. Sahoo, V. Khandelwal, and G. Manik, “Sisal fibers reinforced epoxidized nonedible oils based epoxy green composites and its potential applications,” in Green Composites, Textile Science and Clothing Technology,1st ed., Gateway East, Singapore: Springer, 2019, pp. 73–102.
• [52] S.-J. Park, F.-L. Jin, and J.-R. Lee, “Synthesis and thermal properties of epoxidized vegetable oil,” Macromolecular Rapid Communication, vol. 25, no. 6, pp. 724–727, Mar. 2004.
• [53] S. G. Tan and W. S. Chow, “Thermal properties, fracture toughness and water absorption of epoxy-palm oil blends,” Polymer-Plastics Technology and Engineering, vol. 49, no. 9, pp. 900–907, Jun. 2010.
• [54] F.-L. Jin and S.-J. Park, “Thermomechanical behavior of epoxy resins modified with epoxidized vegetable oils,” Polymer International, vol. 57, no. 4, pp. 577–583, Apr. 2008.
• [55] N. W. Manthey, F. Cardona, G. Francucci, and T. Aravinthan, “Thermo-mechanical properties of epoxidized hemp oil-based bioresins and biocomposites,” Journal of Reinforced Plastics and Composites, vol. 32, no. 19, pp. 1444–1456, Oct. 2013.
• [56] H. Miyagawa, A. K. Mohanty, M. Misra, and L. T. Drzal, “Thermo-physical and impact properties of epoxy containing epoxidized linseed oil, 1,” Macromolecular Materials and Engineering, vol. 289, no. 7, pp. 629–635, Jul. 2004.
• [57] H. Miyagawa, A. K. Mohanty, M. Misra, and L. T. Drzal, “Thermo-physical and impact properties of epoxy containing epoxidized linseed oil, 2,” Macromolecular Materials and Engineering, vol. 289, no. 7, pp. 636–641, Jul. 2004.
• [58] S. G. Tan and W. S. Chow, “Biobased epoxidized vegetable oils and its greener epoxy blends: a review,” Polymer-Plastics Technology and Engineering, vol. 49, no. 15, pp. 1581–1590, Nov. 2010.
• [59] S. A. Madbouly, C. Zhang, and M. R. Kessler, Bio-Based Plant Oil Polymers and Composites, 1st ed., PA, USA: Plastics Design Library, 2016, pp.11-15.
• [60] S. K. Ramamoorthy, “Properties and performance of regenerated cellulose thermoset biocomposites,” PhD dissertations, Department of Polymer and Composite Technology, University of Boras, Sweeden, 2015.
• [61] M. S. Altuncu, “Synthesis of networks and interpenetrating networks of maleated castor oil and epoxy resins,” MSc Thesis, Department of Chemistry, Boğaziçi University, İstanbul, 2015.
• [62] G. Lligadas, J. C. Ronda, M. Galià, and V. Cádiz, “Renewable polymeric materials from vegetable oils: A perspective,” Materials Today, vol. 16, no. 9, pp. 337–343, 2013.
• [63] J. Zhu, K. Chandrashekhara, V. Flanigan, and S. Kapila, “Curing and mechanical characterization of a soy-based epoxy resin system,” Journal of Applied Polymer Science, vol. 91, no. 6, pp. 3513–3518, Mar. 2004.
• [64] A. E. Gerbase, C. L. Petzhold, and A. P. O. Costa, “Dynamic mechanical and thermal behavior of thermotropic polyesters based on,” JAOCS, vol. 79, no. 8, pp. 797–802, 2002.
• [65] S. K. Sahoo, S. Mohanty, and S. K. Nayak, “Toughened bio-based epoxy blend network modified with transesterified epoxidized soybean oil: synthesis and characterization,” RSC Advances, vol. 5, no. 18, pp. 13674–13691, 2015.
• [66] Y. Lu and R. C. Larock, “Novel polymeric materials from vegetable oils and vinyl monomers: Preparation, properties, and applications,” ChemSusChem, vol. 2, no. 2, pp. 136–147, Feb. 2009.
• [67] T. S. Lee, H. Y. Choi, H. N. Choi, K.-Y. Lee, S.-H. Kim, S. G. Lee and D. K. Yong., “Effect of surface treatment of ramie fiber on the interfacial adhesion of ramie/acetylated epoxidized soybean oil (AESO) green composite,” Journal of Adhesion Science and Technology, vol. 27, no. 12, pp. 1335–1347, Jun. 2013.
• [68] S. Ozkur, H. Sezgin, E. Akay, and I. Yalcin-Enis, “Hybrid bio-based composites from blends of epoxy and soybean oil resins reinforced with jute woven fabrics,” Materials Research Express, vol. 7, no. 1, p. 015335, Jan. 2020.
• [69] R. Wang and T. P. Schuman, “Vegetable oil-derived epoxy monomers and polymer blends: A comparative study with review,” Express Polymer Letters, vol. 7, no. 3, pp. 272–292, 2013.
• [70] Y. Xia and R. C. Larock, “Vegetable oil-based polymeric materials: synthesis, properties, and applications,” Green Chemistry, vol. 12, no. 11, p. 1893, 2010.
• [71] L. Fu, L. Yang, C. Dai, C. Zhao, and L. Ma, “Thermal and mechanical properties of acrylated expoxidized-soybean oil-based thermosets,” Journal of Applied Polymer Science, vol. 117, no. 4, pp. 2220–2225, Aug. 2010.
• [72] J. R. Kim and S. Sharma, “The development and comparison of bio-thermoset plastics from epoxidized plant oils,” Industrial Crops and Products, vol. 36, no. 1, pp. 485–499, Mar. 2012.
• [73] X. Wu, X. Zhang, S. Yang, H. Chen, and D. Wang, “The study of epoxidized rapeseed oil used as a potential biodegradable lubricant,” JAOCS, vol. 77, no. 5, pp. 561–563, 2000.
• [74] M. R. Klaas and S. Warwel, “Chemoenzymatic epoxidation of unsaturated fatty acid esters and plant oils,” Journal of the American Oil Chemists' Society, vol. 73, no. 11, pp. 1453–1457, 1996.
• [75] Z. S. Petrović, “Polymers from biological oils,” Contemporary Materials, vol. 1, no. 1, pp. 39–50, Jul. 2010.
• [76] E. Uosukainen, Y. Linko, M. Lämsä, T. Tervakangas, and P. Linko, “Transesterification of trimethylolpropane and rapeseed oil methyl ester,” Journal of the American Oil Chemists' Society, vol. 75, no. 11, pp. 1557–1563, 1998.
• [77] R. Mungroo, N. C. Pradhan, V. V. Goud, and A. K. Dalai, “Epoxidation of canola oil with hydrogen peroxide catalyzed by acidic ion exchange resin,” Journal of the American Oil Chemists' Society, vol. 85, no. 9, pp. 887–896, Sep. 2008.
• [78] J. D. Espinoza Pérez, D. M. Haagenson, S. W. Pryor, C. A. Ulven, and D. P. Wiesenborn, “Production and characterization of epoxidized canola oil,” Transactions of the ASABE, vol. 52, no. 4, pp. 1289–1297, 2009.
• [79] M. Fahimian, D. Adhikari, J. Raghavan, and R. P. Wool, “Biocomposites from canola oil based resins and hemp and flax fibers,” Thirteen European Conference Composite Materials (ECCM 13), 2008, pp. 1–10.
• [80] K. S. Chian and L. H. Gan, “Development of a rigid polyurethane foam from palm oil,” Journal of Applied Polymer Science, vol. 68, no. 3, pp. 509–515, Apr. 1998.
• [81] S. Chuayjuljit, T. Sangpakdee, and O. Saravari “Processing and properties of palm oil-based rigid polyurethane foam,” Journal of Metals, Materials and Minerals, vol. 17, no. 1, pp. 17–23, 2007.
• [82] R. E. M. Lutton, S. E. Taylor, and M. Sonebi, “Commercial potential of bioresins and their success in thermosetting composites: an overview,” 2nd International Conference on Bio-based Building Materials &1st Conference on ECOlogical valorisation of GRAnular and FIbrous materials, Clermont-Ferrand, France, no. June, 2017, pp. 1–10.
• [83] M. Y. Cheong, T. Lye Ooi, S. Ahmad, W. M. Z. W. Yunus, and D. Kuang, “Synthesis and characterization of palm-based resin for UV coating,” Journal of Applied Polymer Science, vol. 111, no. 5, pp. 2353–2361, Mar. 2009.
• [84] Y. Basiron, “Palm oil and its global supply and demand prospects,” Oil Palm Industry Economic Journal, vol. 2, no. 1, pp. 1–10, 2002.
• [85] D. dos S. Martini, B. A. Braga, and D. Samios, “On the curing of linseed oil epoxidized methyl esters with different cyclic dicarboxylic anhydrides,” Polymer, vol. 50, no. 13, pp. 2919–2925, 2009.
• [86] N. Boquillon and C. Fringant, “Polymer networks derived from curing of epoxidised linseed oil: influence of different catalysts and anhydride hardeners,” Polymer, vol. 41, no. 24, pp. 8603–8613, Nov. 2000.
• [87] S. K. Sahoo, V. Khandelwal, and G. Manik, “Development of toughened bio-based epoxy with epoxidized linseed oil as reactive diluent and cured with bio-renewable crosslinker,” Polymers Advanced Technologies, vol. 29, no. 1, pp. 565–574, Jan. 2018.
• [88] Y.-J. Yim, K. Y. Rhee, and S.-J. Park, “Fracture toughness and ductile characteristics of diglycidyl ether of bisphenol-A resins modified with biodegradable epoxidized linseed oil,” Composites Part B Engineering, vol. 131, pp. 144–152, Dec. 2017.
• [89] S. K. Sahoo, V. Khandelwal, and G. Manik, “Development of completely bio-based epoxy networks derived from epoxidized linseed and castor oil cured with citric acid,” Polymers Advanced Technologies, vol. 29, no. 7, pp. 2080–2090, Jul. 2018.
• [90] A. Rana and R. W. Evitts, “Development and characterization of flax fiber reinforced biocomposite using flaxseed oil-based bio-resin,” Journal of Applied Polymer Science, vol. 132, no. 15, p. 41807, Apr. 2015.
• [91] V. Khandelwal, S. K. Sahoo, A. Kumar, and G. Manik, “Electrically conductive green composites based on epoxidized linseed oil and polyaniline: An insight into electrical, thermal and mechanical properties,” Composites Part B Engineering, vol. 136, no. July 2017, pp. 149–157, Mar. 2018.
• [92] P. D. Meshram, R. G. Puri, A. L. Patil, and V. V. Gite, “Synthesis and characterization of modified cottonseed oil based polyesteramide for coating applications,” Progress in Organic Coatings, vol. 76, no. 9, pp. 1144–1150, Sep. 2013.
• [93] M. Pawar, A. Kadam, O. Yemul, V. Thamke, and K. Kodam, “Biodegradable bioepoxy resins based on epoxidized natural oil (cottonseed & algae) cured with citric and tartaric acids through solution polymerization: A renewable approach,” Industrial Crops and Products, vol. 89, pp. 434–447, Oct. 2016.
• [94] S. K. Gaddam, S. N. R. Kutcherlapati, and A. Palanisamy, “Self-cross-linkable anionic waterborne polyurethane–silanol dispersions from cottonseed-oil-based phosphorylated polyol as ionic soft segment,” ACS Sustainable Chemistry & Engineering, vol. 5, no. 8, pp. 6447–6455, Aug. 2017.
• [95] P. Narute and A. Palanisamy, “Study of the performance of polyurethane coatings derived from cottonseed oil polyol,” Journal of Coatings Technology and Research., vol. 13, no. 1, pp. 171–179, Jan. 2016.
• [96] H. Gan, S. A. Hutchinson, C. Hurren, Q. Liu, X. Wang, and R. L. Long, “Effect of oleic purity on the chemical structure, thermal and rheological properties of bio-based polymers derived from high oleic cottonseed oil via RAFT polymerization,” Industrial Crops and Products, vol. 171, no. October 2020, p. 113882, Nov. 2021.
• [97] R. D. J. Johnson, V. A. Prabu, P. Amuthakkannan, and K. A. Prasath, “A review on biocomposites and bioresin based composites for potential industrial applications,” Reviews on Advanced Materials Science, vol. 49, no. 1, pp. 112–121, 2017.
• [98] L. T. Drzal, A. K. Mohanty, and M. Misra, “Bio-composite materials as alternatives to glass fibre reinforced composites for automotive applications,” Magnesium, vol. 40, pp. 386–390, 2001.
• [99] P. A. Fowler, J. M. Hughes, and R. M. Elias, “Biocomposites: technology, environmental credentials and market forces,” Journal of the Science of Food and Agriculture, vol. 86, no. 12, pp. 1781–1789, Sep. 2006.
• [100] A. K. Mohanty, M. Misra, and L. T. Drzal, Natural Fibers, Biopolymers, and Biocomposites. 1st ed., Boca Raton,USA: Taylor & Francis Group, LLC, 2005, pp.236-266.
• [101] S. K. Sahoo, V. Khandelwal, and G. Manik, “Sisal fibers reinforced epoxidized nonedible oils based epoxy green composites and its potential applications,” in Green Composites Processing, Characterisation and Applications for Textiles, 1st ed., Gateway East, Singapore:Springer, 2019, pp. 73–102.
• [102] J. Holbery and D. Houston, “Natural-fiber-reinforced polymer composites in automotive applications,” JOM, vol. 58, no. 11, pp. 80–86, Nov. 2006.
• [103] J. Oztemur, H. Sezgin, and I. Yalçın-Enis, “Design of an impact absorbing composite panel from denim wastes and acrylated epoxidized soybean oil based epoxy resins,” Tekstil ve Konfeksiyon, vol. 31, no. 3, pp. 228–234, 2021.
• [104] C. Flanigan, C. Perry, E. Lee, D. Houston, D. Mielewski, and A. Harris, “Use of agricultural materials in flexible polyurethanes and composites for automotive applications,” 6th Annual SPE Automotive Composite Conference, 2006, vol. 1, pp. 270–287.
• [105] J. M. Pin, N. Sbirrazzuoli, and A. Mija, “From epoxidized linseed oil to bioresin: An overall approach of epoxy/anhydride cross-linking,” ChemSusChem, vol. 8, no. 7, pp. 1232–1243, 2015.
• [106] R. Temmink, B. Baghaei, and M. Skrifvars, “Development of biocomposites from denim waste and thermoset bio-resins for structural applications,” Composites Part A: Applied Science and Manufacturing, vol. 106, pp. 59–69, 2018.
• [107] S. Pilla, Handbook of Bioplastics and Biocomposites Engineering Applications, 1st ed., Salem,USA: Scrivener, 2011,pp.427-438.
• [108] E. Zini, and M. Scandola, “Green composites: An overview,” Polymer Composites, vol. 32, no. 12, pp. 1905–2109, Dec. 2011.
• [109] C. K. Hong, and R. P. Wool, “Development of a bio-based composite material from soybean oil and keratin fibers,” Journal of Applied Polymer Science, vol. 95, pp.1524–1538, 2005.
• [110] S. Miao, K. Liu, P. Wang, Z. Su, and S. Zhang, “Preparation and characterization of epoxidized soybean oil-based paper composite as potential water-resistant materials,” Journal of Applied Polymer Science, vol. 132, no. 10, pp. 41575, 2015.
• [111] V. Kumar, A. Khan, and M. Rabnawaz, “A plant oil-based eco-friendly approach for paper coatings and their packaging applications,” Progress in Organic Coatings, vol. 176, pp. 107386, 2023.
• [112] A. O’Donnell, M. A. Dweib, and R. P. Wool, “Natural fiber composites with plant oil-based resin,” Composites Science and Technology, vol. 64, no. 9, pp. 1135–1145, Jul. 2004.
• [113] G. Marsh, “Next step for automotive materials,” Materials Today, vol. 6, no. 4, pp. 36–43, Apr. 2003.
• [114] M. Holmes, “Biocomposites take natural step forward,” Reinforced Plastics, vol. 63, no. 4, pp. 194–201, 2019.
• [115] L. Jiang, D. Walczyk, and G. Mcintyre, “A new process for manufacturing biocomposite laminate and sandwich parts using mycelium as a binder,” 29th Annual Technical Conference, 2014, pp.8-10.
• [116] L. Jiang, D. Walczyk, L. Mooney, and S. Putney, “Manufacturıng of mycelium-based biocomposites,” International SAMPE Technical Conference, no. May, 2013, pp.1-14.
• [117] M. A. Dweib, B. Hu, H. W. Shenton, and R. P. Wool, “Bio-based composite roof structure: Manufacturing and processing issues,” Composite Structures., vol. 74, no. 4, pp. 379–388, 2006.