Thermal and mechanical analysis of thermal power plant ashes, cement and resin composites

Öz

This study used thermal power plant fly ash (FA) and bottom ash (BA) as fill materials and investigated the thermal properties of composites made of cement and pine tree resin binders. For each ash group, 36 samples were prepared by adding 50% cement and 1% to 2% resin as binders. i) FA samples had 23.18%, 22.99%, and 77.01% lower density, thermal conductivity, and compressive strength than BA samples, respectively. FA samples had 9.42% higher porosity than BA samples. ii) FA (0.177 W/mK) and BA (0.221 W/mK) samples with resin and cement had the lowest heat transfer coefficients. iii) FA (14.46 MPa) and BA (36.96 MPa) samples (resin + cement binder) had the highest compressive strength values.

Anahtar Kelimeler

• Fly ash
• bottom ash
• pine tree resin
• insulating concrete
• building materials

Thermal and mechanical analysis of thermal power plant ashes, cement and resin composites

Abstract

This study used thermal power plant fly ash (FA) and bottom ash (BA) as fill materials and investigated the thermal properties of composites made of cement and pine tree resin binders. For each ash group, 36 samples were prepared by adding 50% cement and 1% to 2% resin as binders. i) FA samples had 23.18%, 22.99%, and 77.01% lower density, thermal conductivity, and compressive strength than BA samples, respectively. FA samples had 9.42% higher porosity than BA samples. ii) FA (0.177 W/mK) and BA (0.221 W/mK) samples with resin and cement had the lowest heat transfer coefficients. iii) FA (14.46 MPa) and BA (36.96 MPa) samples (resin + cement binder) had the highest compressive strength values.

Keywords

• Fly ash
• bottom ash
• pine tree resin
• insulating concrete
• building materials

Kaynakça

1. [1] R. S. Silva, J. J. O Andrade, “Investigation of mechanical properties and carbonation of concretes with construction and demolition waste and fly ash”, Construction and Building Materials, 153, 704-715, 2017
2. [2] H. Xiao, W. Wang, S. H. Goh, “Effectiveness study for fly ash cement improved marine clay”, Construction and Building Materials, 157, 1053-1064, 2017.
3. [3] A. C. Duran, “Carbonation-porosity-strength model for fly ash concrete”, Journal of Materials in Civil Engineering, 16, 91-94, 2004.
4. [4] Q. Jueshi, S. Caijun, W. Zhi, “Activation of blended cements containing fly ash”, Cement and Concrete Research, 31(8), 1121- 1127, 2001.
5. [5] D. S. Babu, K.G. Babu, T. H. Wee, “Properties of lightweight expanded clay aggregate concretes containing fly ash”, Cement and Concrete Researc. 35, 1218-1223, 2005.
6. [6] A. Karasin, M. Dogruyol, “An experimental study on strength and durability for utilization of fly ash in concrete mix”, Advances in Materials Science & Engineering, 25, 1–6, 2014.
7. [7] J. Yu, C. Lu, C. K. Y. Leung. G. Li, “Mechanical properties of green structural concrete with ultrahigh-volume fly ash”, Construction and Building Materials, 147, 510-518, 2017.
8. [8] M. Rafieizonooz, J. Mirza, M. R. Salim, M. Hussin, “Investigation of coal bottom ash and fly ash in concrete as replacement for sand and cement”, Construction and Building Materials, 116, 15–24, 2016.

9. [9] R. Siddique, “Effect of fine aggregate replacement with class F fly ash on the mechanical properties of concrete”, Cement and Concrete Research, 33, 539–547, 2003.
10. [10] R. Dan, “Properties of fresh concrete incorporating a high volume of fly ash as partial fine sand replacement”, Materials and Structures, 30, 473-479, 2004.
11. [11] J. R. Thirumal, R. Harish, “Performance study of self-compacting concrete by fly ash and silica fume for sustainability in building construction”, Engineering Materials, 692, 74-81, 2016.
12. [12] A. Bicer, “Effect of fly ash particle size on thermal and mechanical properties of fly ash-cement composites”, Thermal Science and Engineering Progress, 8, 78-82, 2018.
13. [13] A. Bicer, “Effect of production temperature on thermal & mechanical properties of polystyrene - fly ash composites”, Advanced Composites Letters, 29, 1-8, 2020.
14. [14] F. Rivera, P. Martínez, J. Castro, M. López, “Massive volume fly-ash concrete: A more sustainable material with fly ash replacing cement and aggregates”, Cement and Concrete Composites, 63, 104–112, 2016.
15. [15] E. Aydın, H. S. Arel, “Characterization of high-volume fly-ash cement pastes for sustainable construction applications”, Construction and Building Materials, 157, 96-105, 2017.
16. [16] Y. Li, H. Lin, Z. Wang, “Quantitative analysis of fly ash in hardened cement paste”, Construction and Building Materials,153, 139-145, 2017.
17. [17] A. Bicer, N. Celik, “Influence of pine tree resin on thermo-mechanical properties of pumice-cement composites”, Cement and Concrete Composites, 112, September, 103668, 2020.
18. [18] A. G. Devecioglu, Y. Bicer, “The effects of tragacanth addition on the thermal and mechanical properties of light weight concretes mixed with expanded clay, Period. Polytech. Civil Eng., 60(1), 45-50, 2016.
19. [19] A. Bicer, “ Influence of tragacanth resin on the thermal and mechanical properties of fly ash-cement composites”, Journal of Adhesion Science and Technology, 33(10), 1019-1032, 2019.
20. [20] A. Kaya, F. Kar, “Properties of concrete containing waste expanded polystyrene and natural resin. Construction and Building Materials”, 105, 572-578, 2016.
21. [21] TS 699. The test and experiment methods of natural building stones. TSE. Ankara, 2009.
22. [22] ASTM C 109-80. Standards ASTM Designation, Standard test method for compressive strength of hydraulic cement mortars, 1983.