ELASTIC PROPERTIES OF PERIODIC CORE'S STRUCTURES OF MULTILAYERS FURNITURE PANELS

Öz

The elastic properties of cellular structures of sandwich panel cores depend on their density. Density depends on a number of geometric parameters of the core structure. Research is ongoing to find optimal cell sizes with high stiffness of cores and low relative density. The aim of the investigation was to develop mathematical models describing the relative density and elastic properties of periodic cells: hexagonal, auxetic and lattice. Relative density models are presented as functions of main structural dimensions that affect the shape and size of individual cells. The analysis of the calculation results revealed that the relative density of the core cell was determined by: the thickness of the cell wall, the thickness of the rib, the angle of inclination of the walls and ribs, the length of the walls and the height of the core. For each of the cell types, three models were selected, with different geometries but with equal relative density. Additionally, linear elastic modulus was calculated, as well as modulus of elasticity and Poisson's coefficients for selected structures. Based on the above assumptions, reference cells with the highest mechanical parameters were selected.

Anahtar Kelimeler

• auxetic,density,mechanical properties,periodic cells,sandwich

Kaynakça

1. [1] Jen Y, Chang L. Evaluating bending fatigue strength of aluminum honeycomb sandwich beams using local parameters. Int J Fatigue 2008;30:1103–14. doi:10.1016/j.ijfatigue.2007.08.006. [2] Smardzewski J. Elastic properties of cellular wood panels with hexagonal and auxetic cores. Holzforschung 2013;67:87–92. doi:10.1515/hf-2012-0055. [3] Smardzewski J. Mechanical properties of wood-based sandwich panels with a wavy core 2015. [4] Barboutis I, Vassiliou V. Strength Properties Of Lightweight Paper Honeycomb Panels For The Furniture. 10th Int Sci Conf Eng Des (Interior Furnit Des 2005:17–8. [5] J. Pflug, Vangrimde B, Verpoest I, Vandepitte D, Britzke M, Wagenführ A. Continuously Produced Paper Honeycomb Sandwich Panels for Furniture Applications. 5th Glob Wood Nat Fibre Compos Symosium 2004:1–9. [6] Sam-brew S, Semple K, Smith GD. Preliminary Experiments on the Manufacture of Hollow Core Composite Panels. For Prod J 2011;61:381–9. [7] Hu L, You F, Yu T. Effect of cell-wall angle on the in-plane crushing behaviour of hexagonal honeycombs. Mater Des 2013;46:511–23. doi:10.1016/j.matdes.2012.10.050. [8] RS L. Foam Structures with a Negative Poisson’s Ratio 1987. [9] Gibson L. AM. Cellular solids: structure and properties 1988. [10] Evans KE. Design of doubly curved sandwich panels with honeycomb cores 1991:95–111. [11] Caddock B., Evans K. MI. Honeycomb cores with a negative Poisson ’ s ratio for use in composite sandwich panels 1991. [12] Masters 1. EK. Auxetic honeycombs for composite sandwich panels 1993:1–2. [13] Miller W, Smith CW, Scarpa F, Evans KE. Flatwise buckling optimization of hexachiral and tetrachiral honeycombs. Compos Sci Technol 2010;70:1049–56. doi:10.1016/j.compscitech.2009.10.022. [14] Scarpa F. TP. On the transverse shear modulus of negative Poisson’s ratio honeycomb structures 2000. [15] Evans K. AA. Auxetic Materials: Functional Materials and Structures from Lateral Thinking! 2000. [16] Yang W., Li Z.-M., Shi W., Xie B.—H. YM —B. Review on auxetic materials 2004:8. [17] T L. Flexural Rigidity Of Thin Auxetic Plates n.d.:1–6. [18] Gibson L., Ashby M., Schajer G. RC. The Mechanics of Two-Dimensional Cellular Materials 1982. [19] Masters IG, Evans KE. Models for the elastic deformation of honeycombs. Compos Struct 1996;35:403–22. doi:10.1016/S0263-8223(96)00054-2. [20] Dziuba T. Optimierung der Konstruktion von Stuhlseitenteilen. Holztechnologie 30, 6: 303–306. 1990. [21] Goliński J. Metody optymalizacyjne w projektowaniu technicznym (Optimisation methods in technical designing). Wydawnictwo Naukowo-Techniczne, Warszawa. 1974. [22] Ostwald H. Optymalizacja konstrukcji (Contruction optimisation). Wydawnictwo Politechniki Poznańskiej, Poznań. 1987. [23] Smardzewski J. Optymalizacja konstrukcji skrzydeł okiennych (Construction optimisation of window wings). Przemysł Drzewny, 4: 21–24. 1989. [24] Smardzewski J. Numeryczna optymalizacja konstrukcji krzeseł (Numerical optimisation of chair constructions). Przemysł Drzewny, 1: 1–6. 1992. [25] Jerzy Smardzewski. Furniture Design. Springer. 2015.