SENSORLESS SPEED CONTROL OF PERMANENT MAGNET SYNCHRONOUS MOTOR WITH HYBRID SPEED CONTROLLER USING MODEL REFERENCE ADAPTIVE SYSTEM
Öz
This article presents a hybrid controller which consists of a parallel connected fuzzy logic (FL) and PI speed controller for the sensorless speed control of Permanent Magnet Synchronous Motor (PMSM) using Model Reference Adaptive System (MRAS). The aim of the study to prevent speed overshot in startup time of the motor and provides a better dynamic response in transient states. In addition, this study, in order to eliminate distortions caused by sensors that MRAS sensorless control method, due to its simplicity and good stability has been preferred for the estimation of speed. A detailed simulation comparison between the novel and traditional designs is carried out closed loop sensorless methods of operation when a vector control drive is working under load and no load separately for the PI, FL and hybrid control.
Anahtar Kelimeler
Kaynakça
- Benjak O., Gerling D., (2010). Review of Position Estimation Methods for IPMSM Drives Without a Position Sensor Part II: Adaptive Methods, XIX International Conference on Electrical Machines, pp. 1-6.
- Lu, Z. Sheng, H. Hess, H.L. and Buck, K.M, (2005). The modeling and simulation of a permanent magnet synchronous motor with direct torque control based on Matlab/Simulink, IEEE International Conference on Electric Machines and Drives, 1156-1162.
- Jeffrey Ku, C.-F., Hsu, C.-H., Tsai C.-C., (2007). Control of a permanent magnet synchronous motor with a fuzzy sliding-mode controller. The International Journal Of Advanced Manufacturing Technology Vol. 32, Numbers 7–8 April, On page(s):757–763. Ozcira S., (2008). Permanent Magnet Synchronous Motor Control Methods and Industrial Applications , Master thesis, Technical Uiversity of Yildiz. Time (sec.) 0.2 0.4 -1000 Time (sec.) 0.2 0.4 -1000 Time (sec.) 0.2 0.4 -20 Time (sec.) 0.05 0.1 0.15 0.2 0.25 800 Time (sec.) 0.05 0.1 0.15 0.2 0.25 800 Time (sec.) 0.2 0.4 -20 Time (sec.) 0.2 0.4 A n g le ( ra d /s e c ) Estimated and Measured Angles Time (sec.)
SENSORLESS SPEED CONTROL OF PERMANENT MAGNET SYNCHRONOUS MOTOR WITH HYBRID SPEED CONTROLLER USING MODEL REFERENCE ADAPTIVE SYSTEM
Öz
Anahtar Kelimeler
Kaynakça
- Benjak O., Gerling D., (2010). Review of Position Estimation Methods for IPMSM Drives Without a Position Sensor Part II: Adaptive Methods, XIX International Conference on Electrical Machines, pp. 1-6.
- Lu, Z. Sheng, H. Hess, H.L. and Buck, K.M, (2005). The modeling and simulation of a permanent magnet synchronous motor with direct torque control based on Matlab/Simulink, IEEE International Conference on Electric Machines and Drives, 1156-1162.
- Jeffrey Ku, C.-F., Hsu, C.-H., Tsai C.-C., (2007). Control of a permanent magnet synchronous motor with a fuzzy sliding-mode controller. The International Journal Of Advanced Manufacturing Technology Vol. 32, Numbers 7–8 April, On page(s):757–763. Ozcira S., (2008). Permanent Magnet Synchronous Motor Control Methods and Industrial Applications , Master thesis, Technical Uiversity of Yildiz. Time (sec.) 0.2 0.4 -1000 Time (sec.) 0.2 0.4 -1000 Time (sec.) 0.2 0.4 -20 Time (sec.) 0.05 0.1 0.15 0.2 0.25 800 Time (sec.) 0.05 0.1 0.15 0.2 0.25 800 Time (sec.) 0.2 0.4 -20 Time (sec.) 0.2 0.4 A n g le ( ra d /s e c ) Estimated and Measured Angles Time (sec.)
Ayrıntılar
| Birincil Dil | Türkçe |
|---|---|
| Bölüm | Makaleler |
| Yazarlar | |
| Yayımlanma Tarihi | 1 Ağustos 2014 |
| Yayımlandığı Sayı | Yıl 2014 Cilt: 3 Sayı: 1 |