Exploring the Influence of Various Solvents on the Structural, Optical, and Spectroscopic Properties of MgO

Öz

Magnesium oxide (MgO) samples were manufactured at different temperatures using various solvents of water and ethanol. MgO structure was also modeled and its vibration modes were calculated. The kind of solvent as-used in the synthesis and calcination temperature caused changes in the lattice parameter, crystallinity, and crystallite size. The crystallite size increased with increasing production temperature for both series of the MgO. The morphology and bandgap energy were also affected significantly by the solvent and calcination temperature.

Anahtar Kelimeler

• X-ray techniques
• Electron microscopy
• FT-IR

Kaynakça

1. [1] A. Jassim, S. Salmtori, and J. Jassam, ‘‘Sustainable manufacturing process applied to produce magnesium oxide from sea water,’’ in IOP Conference Series: Materials Science and Engineering, vol. 757, p. 012021, IOP Publishing, 2020.
2. [2] I. Ercan, O. Kaygili, T. Ates, B. Gunduz, N. Bulut, S. Koytepe, and I. Ozcan, ‘‘The effects of urea content on the structural, thermal and morphological properties of mgo nanopowders,’’ Ceramics International, vol. 44, no. 12, pp. 14523–14527, 2018.
3. [3] C. L. Wetteland, J. de Jesus Sanchez, C. A. Silken, N.-Y. T. Nguyen, O. Mahmood, and H. Liu, ‘‘Dissociation of magnesium oxide and magnesium hydroxide nanoparticles in physiologically relevant fluids,’’ Journal of Nanoparticle Research, vol. 20, pp. 1–17, 2018.
4. [4] D. Jesthi, A. Nayak, B. Routara, and R. Nayak, ‘‘Evaluation of mechanical and tribological properties of glass/carbon fiber reinforced polymer hybrid composite,’’ International Journal of Engineering, vol. 31, no. 7, pp. 1088–1094, 2018.
5. [5] R. Salomão, L. Bittencourt, and V. Pandolfelli, ‘‘Aspects of magnesium oxide hydration in refractory castables compositions,’’ Ceramica, vol. 52, pp. 146–150, 2006.
6. [6] W. G. Johnston and J. J. Gilman, ‘‘Dislocation velocities, dislocation densities, and plastic flow in lithium fluoride crystals,’’ Journal of Applied Physics, vol. 30, no. 2, pp. 129–144, 1959.
7. [7] J. Amodeo, S. Merkel, C. Tromas, P. Carrez, S. Korte-Kerzel, P. Cordier, and J. Chevalier, ‘‘Dislocations and plastic deformation in mgo crystals: a review,’’ Crystals, vol. 8, no. 6, p. 240, 2018.
8. [8] G. Monnet, ‘‘Investigation of precipitation hardening by dislocation dynamics simulations,’’ Philosophical Magazine, vol. 86, no. 36, pp. 5927–5941, 2006.

9. [9] L. Huang, Z. Yang, and S. Wang, ‘‘Influence of calcination temperature on the structure and hydration of mgo,’’ Construction and Building Materials, vol. 262, p. 120776, 2020.
10. [10] N. Pathak, S. K. Gupta, C. Prajapat, S. Sharma, P. Ghosh, B. Kanrar, P. K. Pujari, and R. Kadam, ‘‘Defect induced ferromagnetism in mgo and its exceptional enhancement upon thermal annealing: a case of transformation of various defect states,’’ Physical Chemistry Chemical Physics, vol. 19, no. 19, pp. 11975–11989, 2017.
11. [11] I. Sutapa, A. Wahid Wahab, P. Taba, and N. Nafie, ‘‘Dislocation, crystallite size distribution and lattice strain of magnesium oxide nanoparticles,’’ in Journal of Physics: Conference Series, vol. 979, p. 012021, IOP Publishing, 2018.
12. [12] J. Tauc, R. Grigorovici, and A. Vancu, ‘‘Optical properties and electronic structure of amorphous germanium,’’ physica status solidi (b), vol. 15, no. 2, pp. 627–637, 1966.
13. [13] R. Sreekanth, J. Pattar, A. Anupama, and A. Mallikarjunaswamy, ‘‘Synthesis of high surface area and plate-like magnesium oxide nanoparticles by ph-controlled precipitation method,’’ Applied Physics A, vol. 127, pp. 1–9, 2021.
14. [14] S. Kiran, H. B. Albargi, G. Afzal, U. Aimun, M. N. Anjum, M. B. Qadir, Z. Khaliq, M. Jalalah, M. Irfan, and M. Abdullah, ‘‘A zadirachta indica-assisted green synthesis of magnesium oxide nanoparticles for degradation of reactive red 195 dye: a sustainable environmental remedial approach,’’ Applied Water Science, vol. 13, no. 10, p. 193, 2023.