Exploring of Polyvinylchloride / Silicon Carbide Nanocomposites Containing Different Amounts of SiC Nanoparticles

Yıl 2021, Cilt: 8 Sayı: 3, 1395 - 1404, 30.09.2021

Mustafa Pekdemir Ibrahim Nazem Qader Yildirim Aydogdu Meltem Coşkun

https://doi.org/10.31202/ecjse.932313

Öz

Polyvinyl chloride (PVC) is one of the popular materials that extensively used in different areas, so scientists are trying to investigate its characteristics in different formats, such as blends and composites, to improve its properties. Due to the distinctive nano particles’ properties, polymer-based nanocomposites can offer new characteristics to pure polymers and can widen their applications in different areas. In this study, we added different compositions of silicon carbide (SiC) to PVC to investigate its molecular, thermal, and microstructural properties. Attenuated total reflection- infrared (ATR-IR), thermogravimetry (TG), differential scanning calorimetry (DSC), and optical microscopy (OM) were utilized to study molecular bond structure, thermal degradation, caloric properties, and surface morphology of the pure PVC and its composites. The first derivative of TG results showed that the temperature of the maximum thermal degradation of the PVC increased with increasing SiC nanoparticle ratio. Also, it is found that the PVC/12 mol% SiC started thermal degradation at comparably low temperature, however, the amount of residue of the composites is more than the pure PVC. Additionally, SiC nanoparticles caused the melting temperature of the composites to slightly shifts to a lower temperature compared to the PVC. It was observed that silicon carbide diminished the smoothness of the surface by increasing its fraction in the composite.

Anahtar Kelimeler

PVC, Silicone carbide, composite, Thermal analysis, Optical microscopy

Kaynakça

• [1]. Yu J., Sun L., Ma C., Qiao Y. and Yao H., "Thermal degradation of PVC: A review", Waste Management, 2016, 48: 300-314.
• [2]. Tukur A., Pekdemir M. E., Haruna H. and Coşkun M., "Magnetic nanoparticle bonding to PVC with the help of click reaction: characterization, thermal and electrical investigation", Journal of Polymer Research, 2020, 27(6): 161.
• [3]. Fang Y., Wang Q., Guo C., Song Y. and Cooper P. A., "Effect of zinc borate and wood flour on thermal degradation and fire retardancy of Polyvinyl chloride (PVC) composites", Journal of Analytical and Applied Pyrolysis, 2013, 100: 230-236.
• [4]. Yazdani H., Smith B. E. and Hatami K., "Multi-walled carbon nanotube-filled polyvinyl chloride composites: Influence of processing method on dispersion quality, electrical conductivity and mechanical properties", Composites Part A: Applied Science and Manufacturing, 2016, 82: 65-77.
• [5]. Chiscan O., Dumitru I., Postolache P., Tura V. and Stancu A., "Electrospun PVC/Fe3O4 composite nanofibers for microwave absorption applications", Materials Letters, 2012, 68: 251-254.
• [6]. Ebnalwaled A. A. and Thabet A., "Controlling the optical constants of PVC nanocomposite films for optoelectronic applications", Synthetic Metals, 2016, 220: 374-383.
• [7]. Pekdemir M. E., "Poli (Vinil klorür)/Fe3O4 Manyetik Nanopartikül Kompozitlerinin Sentezi, Termal ve Elektriksel Özelliklerinin İncelenmesi", Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi, 20(5): 802-809.
• [8]. Baig U., Gondal M. A., Ansari M. A. and Akhtar S., "Facile synthesis, characterization and antibacterial activity of nanostructured palladium loaded silicon carbide", Ceramics International, 2018, 44(14): 16908-16914.
• [9]. Rajarao R., Ferreira R., Sadi S. H. F., Khanna R. and Sahajwalla V., "Synthesis of silicon carbide nanoparticles by using electronic waste as a carbon source", Materials Letters, 2014, 120: 65-68.
• [10]. Alghunaim N. S., "Structural, thermal, dielectric spectroscopic and AC impedance properties of SiC nanoparticles doped PVK/PVC blend", Results in Physics, 2018, 9: 1136-1140.
• [11]. Haruna H., Pekdemir M. E., Tukur A. and Coşkun M., "Characterization, thermal and electrical properties of aminated PVC / oxidized MWCNT composites doped with nanographite", Journal of Thermal Analysis and Calorimetry, 2020, 139(6): 3887-3895.
• [12]. Geilich B. M. and Webster T. J., editors. Reduced adhesion of Staphylococcus aureus to ZnO/PVC nanocomposites. 2013 39th Annual Northeast Bioengineering Conference; 2013, IEEE.
• [13]. Hasan M. and Lee M., "Enhancement of the thermo-mechanical properties and efficacy of mixing technique in the preparation of graphene/PVC nanocomposites compared to carbon nanotubes/PVC", Progress in Natural Science: Materials International, 2014, 24(6): 579-587.
• [14]. Taha T. A., "Optical properties of PVC/Al2O3 nanocomposite films", Polymer Bulletin, 2019, 76(2): 903-918.
• [15]. Gorassini A., Adami G., Calvini P. and Giacomello A., "ATR-FTIR characterization of old pressure sensitive adhesive tapes in historic papers", Journal of Cultural Heritage, 2016, 21: 775-785.
• [16]. Sun J., Li J., Sun G., Zhang B., Zhang S. and Zhai H., "Dielectric and infrared properties of silicon carbide nanopowders", Ceramics international, 2002, 28(7): 741-745.
• [17]. Li Y., Chen C., Li J.-T., Yang Y. and Lin Z.-M., "Surface charges and optical characteristic of colloidal cubic SiC nanocrystals", Nanoscale research letters, 2011, 6(1): 1-7.
• [18]. Klarić I., Vrandečić N. S. and Roje U., "Effect of poly(vinyl chloride)/chlorinated polyethylene blend composition on thermal stability", Journal of Applied Polymer Science, 2000, 78(1): 166-172.
• [19]. Jia P., Hu L., Feng G., Bo C., Zhang M. and Zhou Y., "PVC materials without migration obtained by chemical modification of azide-functionalized PVC and triethyl citrate plasticizer", Materials chemistry and physics, 2017, 190: 25-30.
• [20]. Altenhofen da Silva M., Adeodato Vieira M. G., Gomes Maçumoto A. C. and Beppu M. M., "Polyvinylchloride (PVC) and natural rubber films plasticized with a natural polymeric plasticizer obtained through polyesterification of rice fatty acid", Polymer Testing, 2011, 30(5): 478-484.
• [21]. Guler K., Kisasoz A. and Karaaslan A., "The fabrication and characterization of Al/SiC-MMC castings produced by vacuum assisted solidmould investment casting process", Russian Journal of Non-Ferrous Metals, 2013, 54(4): 320-324.
• [22]. Ghandvar H., Idris M. H., Ahmad N. and Moslemi N., "Microstructure development, mechanical and tribological properties of a semisolid A356/xSiCp composite", Journal of applied research and technology, 2017, 15(6): 533-544.