Numerical Investigation of Hot Ultrasonic Assisted Turning of Titanium Alloy

Abstract

Titanium alloys exhibit superior properties such as high strength-to-weight ratio and corrosion resistance but these alloys possess poor machinability. To overcome this disadvantage, new machining methods (Ultrasonic Assisted Machining, Hot Machining etc.) are developed. Hot Ultrasonic Assisted Turning (HUAT) is a new machining method which changes the cutting system between tool and workpiece therefore reduced cutting forces and better surface finish for workpiece are obtained. In this study, 2D finite element (FE) analysis was carried out to investigate the effects of HUAT for titanium alloys. It was confirmed that HUAT technique reduces cutting forces and effective stress significantly but cutting temperature increases compared to conventional turning.

Keywords

• Hot ultrasonic assisted machining,Ti6Al4V

Kaynakça

1. C. R. Dandekar, Y. C. Shin, J. Barnes, “Machinability improvement of titanium alloy (Ti–6Al–4V) via LAM and hybrid machining”, International Journal of Machine Tools and Manufacture 50/2,174-182, 2010
2. L.Özler, A. İnan, C. Özel, “Theoretical And Experimental Determination Of Tool Life In Hot Machining Of Austenitic Manganese Steel”, International Journal Of Machine Tools And Manufacture 41/2,163-172, 2001
3. P.A Rebro, Y.C. Shin, F.P. Incropera, “Desing Of Operating Conditions For Crackfree Laser- Assisted Machinig Of Mullite”, International Journal Of Machine Tools And Manufacture 44/7-8, 677-694, 2004
4. M.C. Anderson, Y. C. Shin, “Laser-Assisted Machining Of An Austenitic Stainless Steel: P550”, J. Engineering Manufacture 220/12, 2055-2067, 2006
5. T. Özel, F. Pfefferkorn, “Pulsed Laser Assisted Micromilling For Die/Mold Manufacturing”, ASME 2007 International Manufacturing Science and Engineering Conference, 337-342, 2007
6. F.E. Pfefferkorn, S. Lei, Y. Jeon, G. Haddad, “A Metric For Defining The Energy Efficiency Of Thermally Assisted Machining”, International Journal Of Machine Tools & Manufacture 49/5, 357–365, 2009
7. V.I Babitsky, A.V Mitrofanov, V.V Silberschmidt, “Ultrasonically assisted turning of aviation materials: simulations and experimental study”, Ultrasonics 42/1-9, 81-86, 2004
8. A. Maurotto, R. Muhammad, A. Roy, V. V. Silberschmidt, “Enhanced ultrasonically assisted turning of a β-titanium alloy”, Ultrasonics 53/7, 1242-1250, 2013

9. M.J. Nategh, H. Razavi, A. Abdullah, “Analytical modeling and experimental investigation of ultrasonic-vibration assisted oblique turning, part I: Kinematics analysis”, International Journal of Mechanical Sciences, 63/1, 1-11, 2012
10. R. Muhammad, A.Maurotto, M.Demiral, A.Roy, V. V. Silberschmidt, “Thermally enhanced ultrasonically assisted machining of Ti alloy”, CIRP Journal of Manufacturing Science and Technology 7/2, 159-167, 2014
11. F. H. Cakir, S. Gurgen, M. A. Sofuoglu, O. N. Celik, and M. C. Kushan, “Finite Element Modeling of Ultrasonic Assisted Turning of Ti6Al4V Alloy”, Procedia - Soc. Behav. Sci.195, 2839–2848, 2015
12. W.S. Lee and C.F. Lin, “High-temperature deformation behaviour of Ti6Al4V alloy evaluated by high strain-rate compression tests,” J. Mater. Process. Technol. 75/1–3, 127–136, 1998