Synthesis of Voltage PID Controller to Improve INC- MPPT Algorithm for Cascade Regulation of KC200GT Panel-Based Solar System

Öz

Bu makale, Artımlı İletkenlik INC algoritmasına dayanan Maksimum Güç Noktası İzleme MPPT yöntemini önermektedir. Güneş paneli sisteminin çıkış tepkilerinde oluşan dalgalanma sorununun önüne geçmek birincil amaçtır. Bu sonuncusu, KC200GT panel sistemini DC-DC yükseltici dönüştürücü boyunca dirençli bir yük sağlamak için kullanırken içerir. Bu amaca aşağıdaki iki adıma saygı duyarak ulaşılır. İlk olarak, INC algoritması, DC-DC yükseltici dönüştürücünün anahtar düğmesini kontrol etmek için standart INC-MPPT kontrol stratejisinde sıklıkla kullanılan bir görev döngüsü kontrolü yerine optimal bir referans voltajı üretecek şekilde değiştirildi. İkincisi, güneş sistemi davranışı, gerilim PID denetleyicisinin tasarımı için doğrusal küçük sinyal modeliyle modellenmiştir. Her örnekte, önceki referans voltajının KC200GT paneli tarafından sağlanan voltajla karşılaştırılması sonucu bir voltaj farklılığı üretilir ve burada voltaj PID kontrolörünün kullanılması zorunlu hale gelir. Bu iki adım, daha sonra iyileştirilmiş INC-MPPT olarak bilinen yeni bir stratejinin geliştirilmesini sağlar. Önerilen stratejinin performans değerlendirmeleri, MATLAB®/SIMULINK yazılımı kullanılarak simülasyon yoluyla gerçekleştirilir ve elde edilen sonuçlar, standart INC-MPPT kontrol stratejisi uygulanırken meydana gelen dalgalanma sorununun üstesinden gelmek için gerilim PID denetleyicisinin dahil edilmesinin hayati önemini ortaya koymaktadır.

Anahtar Kelimeler

• PV system; DC-DC Boost Converter; Maximum Power Point Tracking MPPT; INC algorithm.
• PV system
• DC-DC Boost Converter
• Maximum Power Point Tracking MPPT
• INC algorithm

Synthesis of Voltage PID Controller to Improve INC- MPPT Algorithm for Cascade Regulation of KC200GT Panel-Based Solar System

Abstract

This paper proposes the Maximum Power Point Tracking MPPT method based on the Incremental Conductance INC algorithm. The primary goal is to prevent the ripple problem that is occurred in the output responses of the solar panel system. This last includes the KC200GT panel system, while using it to supply a resistive load throughout the DC-DC boost converter. This goal is reached through respecting the two following steps. First, the INC algorithm modified so that it produces an optimal reference voltage rather than a duty cycle control, which is often utilized in the standard INC-MPPT control strategy for controlling the switch button of the DC-DC boost converter. Second, the solar system behavior is modeled by the linear small-signal model for the design of the voltage PID controller. At each sample, a voltage discrepancy is generated as a result of comparing the previous reference voltage to the one delivered by the KC200GT panel where the introduction of the voltage PID controller becoming indispensable. These two steps create the development of a novel strategy that is afterwards known as improved INC-MPPT. The performance assessments of the proposed strategy are carried out by simulation using MATLAB®/SIMULINK software, and the obtained results reveal the crucial importance of including the voltage PID controller to overcome the ripple issue, occurred when applying the standard INC-MPPT control strategy.

Keywords

• PV system
• DC-DC Boost Converter
• Maximum Power Point Tracking MPPT
• INC algorithm

Kaynakça

1. Mohanty, Parimita, et al. "MATLAB based modeling to study the performance of different MPPT techniques used for solar PV system under various operating conditions." Renewable and Sustainable Energy Reviews 38 (2014): 581-593.
2. Hegazy Rezk, Ali M. Eltamaly, “A comprehensive comparison of different MPPT techniques for photovoltaic systems” , Solar Energy, vol 112, 1 – 11. doi:10.1016/j.egypro.2014.11.010.
3. N. Femia, G. Petrone, G. Spagnuolo, M. Vitelli, “Optimizing Duty cycle Perturbation of P&O MPPT Technique”, Proceedings of PESC. Aachen (Germanv). June20-25.2004.
4. Yiğit, E., Özkaya, U., Öztürk, Ş., Singh, D., and Gritli, H. (2021). Automatic detection of power quality disturbance using convolutional neural network structure with gated recurrent unit. Mobile Information Systems, 2021, 1-11.
5. Mei Q, Shan M, Liu L, Guerrero JM, “A novel improved variable step- size a novel improved variable step-size method for PV systems”, IEEE Trans IndElectron 2011;58:2427–34.
6. Abdelsalam AK, Massoud AM, Ahmed S, Enjeti P, “High-performance adaptive perturb and observe MPPT technique for photovoltaic-based micro grids”, IEEE Trans Power Electron 2011;26:1010–21.
7. Kollimalla, S. K., & Mishra, M. K. (2014). A novel adaptive P&O MPPT algorithm considering sudden changes in the irradiance. IEEE Transactions on Energy conversion, 29(3), 602-610.
8. Harrag, A., & Messalti, S. (2015). Variable step size modified P&O MPPT algorithm using GA-based hybrid offline/online PID controller. Renewable and Sustainable Energy Reviews, 49, 1247-1260.

9. Althobaiti, A., M. Armstrong, and M. A. Elgendy. "Space vector modulation current control of a three-phase PV grid-connected inverter." 2016 Saudi Arabia Smart Grid (SASG). IEEE, 2016.
10. Lasheen, M., Rahman, A. K. A., Abdel-Salam, M., & Ookawara, S. (2017). Adaptive reference voltage-based MPPT technique for PV applications. IET Renewable Power Generation, 11(5), 715-722.
11. Bechouat, M., Younsi, A., Sedraoui, M., Soufi, Y., Yousfi, L., Tabet, I., &Touafek, K. (2017). Parameters identification of a photovoltaic module in a thermal system using meta-heuristic optimization methods. International Journal of Energy and Environmental Engineering, 8(4), 331-341.
12. Bechouat, M., Sedraoui, M., Feraga, C. E., Aidoud, M., & Kahla, S. (2019). Modeling and Fuzzy MPPT Controller Design for Photovoltaic Module Equipped with a Closed-Loop Cooling System. Journal of Electronic Materials, 1-10.
13. M. G.Villalva, T. G.De Siqueira&E.Ruppert, (2010). Voltage regulation of photovoltaic arrays: small-signal analysis and control design. IET Power Electronics, 3(6), 869-880.