Determination of the mass attenuation coefficients, effective atomic numbers and effective electron numbers of some concrete containing barites for 511, 835 and 1275 keV gamma rays

Öz

The linear attenuation coefficients (μl) of concretes including barite fractions of 0%, 50%  and 100%  were measured at the gamma energies of 511, 835 and 1275 keV.The measurements have been performed using a low level gamma counting spectrometer including a 3”x3”  NaI(TI) detector by ORTEC Inc., connected to a multichannel pulse height analyzer. Total mass attenuation coefficients, effective atomic numbers and effective electron numbers valuesf or concretes are calculated in the energy range from1keVto 100GeV. The values of mass attenuation coefficients used in calculations are taken from the XCOM. The results from the measurements were compared with the theoretically calculated results. The measured results of mass attenuation coefficients, effective atomic numbers and effective electron density were found to be in good agreement with the calculations.

Anahtar Kelimeler

• Barite concrete
• mass attenuation coefficients
• effective atomic numbers
• effective electron density

Determination of the mass attenuation coefficients, effective atomic numbers and effective electron numbers of some concrete containing barites for 511, 835 and 1275 keV gamma rays

Abstract

The linear attenuation coefficients (μl) of concretes including barite fractions of 0%, 50% and 100% were measured at the gamma energies of 511, 835 and 1275 keV. The measurements have been performed using a low level gamma counting spectrometer including a 3”x3” NaI(TI) detector by ORTEC Inc., connected to a multichannel pulse height analyzer. Total mass attenuation coefficients, effective atomic numbers and effective electron numbers of concretes are calculated in the energy range from 1 keV to 100 GeV. The values of mass attenuation coefficients used in the calculations are taken from the XCOM. The measurement values were compared with the theoretically calculated results. The measured results of mass attenuation coefficients, effective atomic numbers and effective electron densities were found to be in good agreement with the calculations.

Keywords

• Barite concrete
• mass attenuation coefficients
• effective atomic numbers
• effective electron density

Kaynakça

1. Hine G.J., The effective atomic numbers of materials for various gamma interactions, Physics Review, 85, 725–737 (1952)
2. Jackson D.F. and Hawkes D.J., X-ray attenuation coefficients of elements and mixtures, Physics Report 70, 169–233 (1981)
3. Hubbell J.H., Photon mass attenuation and energy absorption, International Journal of Applied Radiation and Isotopes, 33, 1269–1290 (1982)
4. Hubbell J.H. and Seltzer S.M., Tables of X-ray Mass Attenuation Coefficients and Mass Energy-Absorption Coefficients 1 keV to 20 MeV for Elements Z= 1 to 92 and 48 Additional Substances of Dosimetric Interest, National Institute of Standards and Physics Laboratory, NISTIR, 5632 (1995)
5. Berger M.J. and Hubbell J.H., (XCOM) Photon Cross Section on a Personal Computer NBSIR, 87, NIST, 3597 (1987)
6. Akkurt, _I., Basyigit, C., Kilincarslan, S., Mavi, B., 2006. Radiation shielding of concretes containing different aggregates. Cem. Concr. Compos. 28 (2), 153– 157.
7. Baltas H, Celik S, Cevik U, Yanmaz E (2007). Measurement of mass attenuation coefficients and effective atomic numbers for MgB2 superconductor using Xray energies. Radiat. Meas. 42:55-60.
8. Manjunathaguru V, Umesh TK (2007). Total interaction cross sections and effective atomic numbers of some biologically important compounds containing H, C, N and O in the energy range 6.4–136 keV. J. Phys. B: Atomic Mol. Opt. Phys. 40:3707-3718.

9. Singh, M.P., Sandhu, B.S., Singh, B., 2007. Measurement of effective atomic number of composite materials using scattering of c-rays. Nucl. Instrum. Meth. A 580, 50–53.
10. Celik A, Cevik U, Bacaksiz E, Celik N (2008). Effective atomic numbers and electron densities of CuGaSe2 semiconductor in the energy range 6–511 keV. X-Ray Spectrometry. 37:490-494.
11. Han I, Demir L (2009c). Studies on effective atomic numbers, electron densities from mass attenuation coefficients in TixCo1_x and CoxCu1_x alloys. Nuclear Instruments and Methods in Physics Research Section B. 267:3505–3510.
12. Akkurt, I , 2009. Effective atomic and electron numbers of some steels at different energies. Annals of Nuclear Energy 36, 1702–1705.
13. Manohara SR, Hanagodimath SM, Thind KS, Gerward L (2010). The effective atomic number revisited in the light of modern photoninteraction cross-section databases. Applied Radiation and Isotopes. 68:784-787.
14. Kurudirek, M., Aygun, M., Erzeneoglu, S.Z., 2010. Chemical composition, effective atomic number and electron density study of trommel sieve waste (TSW), Portland cement, lime, pointing and their admixtures with TSW in different proportions. Int. J. Appl. Radiat. Isot. 68, 106–1011.
15. Damla, N., Cevik, U., Kobya, A.I., Celik, A., Celik, N., Van Grieken, R., 2010. Radiation dose estimation and mass attenuation coefficients of cement samples used in Turkey. J. Hazard. Mater. 176, 644–649.
16. Akkurt, I., Akyıldırım, H., Mavi, B., Kilincarslan, S., Basyigit, C., 2010a. Photon attenuation coefficients of concrete includes barite in different rate. Ann. Nucl. Energy 37–7, 910–914.
17. Akkurt, I, Akyıldırım, H., Mavi, B., Kılıcarslan, S., Basyigit, C., 2010b. Gamma-ray shielding properties of concrete including barite at different energies. Prog. Nucl. Energy 52, 20–623.
18. Yılmaz, E., Baltas, H., Kırısa, E., Ustabas, _I., Cevik, U., El-Khayatt, A.M., 2011. Gamma ray and neutron shielding properties of some concrete materials. Ann. Nucl. Energy 38 (10), 2204–2212.
19. Sidhu BS, Dhaliwal AS, Mann KS, Kahlon KS (2012). Study of mass attenuation coefficients, effective atomic numbers and electron densities for some low Z compounds of dosimetry interest at 59.54 keV incident photon energy. Ann. Nucl. Energy 42:153-157.
20. Medhat ME, Wang YF (2015). Investigation on radiation shielding parameters of oxide dispersion strengthened steels used in high temperature nuclear reactor applications. Ann. Nucl. Energy 80:365- 370.
21. Un A, Caner T (2014). The Direct-Zeff software for direct calculation of mass attenuation coefficient, effective atomic number and effective electron number. Ann. Nucl. Energy 65:158-165.
22. Elmahroug Y, Tellili B, Souga C (2015). Determination of total mass attenuation coefficients, effective atomic numbers and electron densities for different shielding materials. Ann. Nucl. Energy 75:268- 274.