Earthquake Vulnerability Assessment Of RC Structures With Variable Infill Wall Properties
Öz
The infill walls are often used to the aim of dividing the residential area to provide the architectural requirements according to purpose of use in residential RC structures. Although there is conflict about the infill walls occur a RC structure less vulnerable to earthquake impacts, the beneficial influence of the infill walls on dynamic and static behaviors of RC structures is generally thought. Therefore, understanding the contribution of the infill wall to structural behavior of RC structures is very significant in terms of the structural safety. This study investigates the influence of infill wall having variable mechanical properties as compressive strength and thickness on structural behavior and earthquakes performance of low-rise residential RC structures. In the study, the selected RC structures for earthquake vulnerability assessment are existing residential buildings. The nonlinear analyzes are carried out by considering architectural plan of each of RC structure to determine influence of infill wall having variable properties on the structural and earthquake behavior. The analyzes are also made for the bare-frame cases of RC structures and are compared with behavior of infilled frames of them. When the results obtained in the this study are evaluated, the existing infill walls and differences in the its mechanical properties significantly affected earthquake vulnerability the RC structures, positively.
Anahtar Kelimeler
Kaynakça
- Asteris, P. G., Giannopoulos, I. P., & Chrysostomou, C. Z. (2012). Modeling of infilled frames with openings. The Open Construction and Building Technology Journal, 6(1), 81-91.
- Bas, S., Lee, J. H., Sevinc, M., & Kalkan, I. (2017). Seismic performance of R/C structures under vertical ground motion. Computers and Concrete, 20(4), 369-380.
- Benavent-Climent, A., Ramírez-Márquez, A., & Pujol, S. (2018). Seismic strengthening of low-rise reinforced concrete frame structures with masonry infill walls: shaking-table test. Engineering structures, 165, 142-151.
- Bertero, V., & Brokken, S. (1983). Infills in seismic resistant building. Journal of Structural Engineering, 109(6), 1337-1361.
- Celarec, D., Ricci, P., & Dolšek, M. (2012). The sensitivity of seismic response parameters to the uncertain modelling variables of masonry-infilled reinforced concrete frames. Engineering Structures, 35, 165-177.
- Chrysostomou, C. Z., & Asteris, P. G. (2012). On the in-plane properties and capacities of infilled frames. Engineering Structures, 41, 385-402.
- Crisafulli, F. J., Carr, A. J., & Park, R. (2000). Analytical modelling of infilled frame structures-a general review. Bulletin-New Zealand Society for Earthquake Engineering, 33(1), 30-47.
- CSI, SAP 2000. Integrated Finite Element Analysis and Design of Structures Basic Analysis Reference Manual. Berkeley, California, USA, 2002.
Ayrıntılar
Birincil Dil
İngilizce
Konular
Mühendislik
Bölüm
Araştırma Makalesi
Yayımlanma Tarihi
31 Aralık 2019
Gönderilme Tarihi
26 Temmuz 2019
Kabul Tarihi
23 Eylül 2019
Yayımlandığı Sayı
Yıl 2019 Sayı: 17
Cited By
Mevcut konut türü betonarme bir binanın deprem güvenliğinin incelenmesi
Gümüşhane Üniversitesi Fen Bilimleri Enstitüsü Dergisi
https://doi.org/10.17714/gumusfenbil.906844