Internet of Things Based Parking Lot LED Lighting System
Abstract
In order to reduce energy consumption due to lighting, a good control mechanism should be established and more efficient lighting products should be designed. Conventional lighting products consume a lot of energy and pose a threat to the environment. And also, because of these lighting products which are based on time-dependent on-off control mechanism or manually switched on-off mechanism, sufficient efficiency and saving cannot be achieved. In this study, to minimize these drawbacks, a LED driver system and an Internet of Things based control system is presented for parking lot lighting. Instead of conventional lightings, LED lighting is used; and an efficient LED driver circuit is designed with the light level control option. To ensure the synchronous control of LED lighting, Internet of Things, one of the rapidly growing technologies, is integrated into the system. All data from the lighting nodes are sent to the cloud database via internet connections of the wireless sensor nodes. And a control software which is designed processes the data in the cloud database and writes back the light levels of each lighting nodes to the cloud database. As a result, an efficient lighting environment is created, unnecessary lightings are prevented, in case of failure of the lighting nodes necessary repairs can be planned easily, and also necessary statistical reports can be created according to the data locates in the cloud database.
Keywords
Kaynakça
- Zhang, J., Xu, L., Wu, X, Qian, Z. A. (2011). Precise Passive Current Balancing Method for Multioutput LED Drivers. IEEE Trans. Power Electron., vol.26, no.8, pp.2149,2159.
- Hui, S. Y. R., Qin, Y. X. A. (2009). General photo-electro-thermal theory for light-emitting diodes (LED) systems. IEEE Trans. Power Electron. vol. 24, no. 8, pp. 1967–1976.
- Krames, M. R., Shchekin, O. B., Mueller-Mach, R., Mueller, G. O., . Zhou, L, Harbers, G., and Craford, M. G. (2007). Status and Future of High-Power Light-Emitting Diodes for Solid-State Lighting. Display Technology, Journal of, vol.3, no.2, pp.160,175.
- Patil, S. M., Vijayalashmi, M., and Tapaskar, R. (2017). IoT based solar energy monitoring system. 2017 International Conference on Energy, Communication, Data Analytics and Soft Computing (ICECDS), Chennai, pp. 1574-1579.
- Deng, H., Xie, X., Ma, W., and Han, Y. (2016). A LED street lamp monitoring system based on Bluetooth wireless network and LabVIEW. 2016 2nd IEEE International Conference on Computer and Communications (ICCC), Chengdu, 2016, pp. 2286-2291.
- Jin, J., Gubbi, J., Marusic, S., and Palaniswami, M. (2014). An information framework for creating a smart city through the internet of things. IEEE Internet of Things Journal, vol. 1, no. 2, pp. 112–121.
- (2019). ESP8266EX Datasheet. https://www.espressif.com/sites/default/files/documentation/0a-esp8266ex_datasheet_en.pdf.
- Drapela, J., Bok, J. (2008). An improved Valley-Fill passive Power-Factor-Correction circuit for electronic ballast.
Ayrıntılar
Birincil Dil
İngilizce
Konular
Mühendislik
Bölüm
Araştırma Makalesi
Yazarlar
Fırat Aydemir
*
0000-0002-8965-1429
Türkiye
Yayımlanma Tarihi
31 Aralık 2019
Gönderilme Tarihi
21 Ağustos 2019
Kabul Tarihi
27 Eylül 2019
Yayımlandığı Sayı
Yıl 2019 Sayı: 17
Cited By
İleri Biyolojik Atıksu Arıtma Tesisleri için Mikro Hidroelektrik Santrali ve LED Aydınlatma Uygulanabilirliği ile Enerji Verimliliği: Gaziantep Örneği
European Journal of Science and Technology
https://doi.org/10.31590/ejosat.807643Nesnelerin İnternetinde Kullanılan Kablosuz Algılayıcı Cihazlar için Bilgi Merkezli Ağ Mimarisinin Uygulanabilirliği Araştırması
European Journal of Science and Technology
https://doi.org/10.31590/ejosat.739400