The Effect of LED Deployment on RSSI-based VLP Systems

Abstract

In this paper, the effect of light emitting diode (LED) deployment is investigated based on the received signal strength indication (RSSI) technique for visible light positioning (VLP) systems. The optical code division multiple access (OCDMA) is used as a multiplexing technique to transmit the location and RSSI information of LEDs simultaneously. For different highly reflective indoor scenarios, LEDs are placed on the ceiling of a room considering homogeneous illumination. The illuminance of the room is provided particularly with 400 lux minimally at the desk height. In order to demonstrate the uniformity of lighting for different indoor scenarios, the uniformity illuminance ratio (UIR) values are also obtained in this study. In addition, electrical signal-to-noise ratio (SNR), an important parameter for reliable communication, is calculated at desk height for each scenario considered and an SNR level of 45 dB is obtained at a minimum. The simulation results demonstrate that the mean square error (MSE) of the estimated location is reduced with an increase in the number of visible access points (VAPs). The MSE of the distance for number of VAPs 12 and 16 are the best, however, the scenario with 16 VAPs is preferable with a better uniformity illuminance ratio (UIR) parameter. In terms of illuminance, all the cases have the average illuminance value more than 450 lux.

Keywords

• Visible light positioning,RSSI,Trilateration,CDMA

LED Dağılımının RSSI Tabanlı Görünür Işık Konum Belirleme Sistemleri Üzerindeki Etkisi

Öz

Bu çalışmada, ışık yayan diyot (LED) dağılımının alınan sinyal gücü göstergesi (ASGG) tabanlı görünür ışık konum belirleme sistemlerinin performansı üzerindeki etkisi incelenmiştir. LED’lerin konum ve ASGG bilgisini alıcı birime göndermek için optik kod bölmeli çoklu erişim tekniği çoğullama tekniği olarak kulllanılmıştır. Bina içi yansımanın kuvvetli olduğu senaryolar için LED’ler tavana homojen bir aydınlatma sağlayacak şekilde yerleştirilmiştir. Oda içindeki aydınlatma seviyesi masa yüksekliğinde minimum 400 lüks sağlanacak şekilde ayarlanmış ve aydınlatmanın homojenliğini farklı bina içi senaryolarda ortaya koymak için aydınlık homojenliği oranı (AHO) değerleri elde edilmiştir. Ek olarak, güvenli haberleşme için önemli bir parameter olan elektriksel sinyal gürültü oranı değerleri dikkate alınan her senaryo için fotodedektör (PD) düzleminde hesaplanmış ve minimum değer olarak 45 dB elde edilmiştir. Simulasyon sonuçları LED dizilerinin (VAP) sayısı arttıkça kestirilen konumun ortalama karesel hata (OKH) değerinin azaldığını göstermiştir. VAP sayısı 12 ve 16 olduğu durumda en iyi OKH değeri elde edilmiştir. Bununla birlikte AHO değeri daha iyi olan 16 VAP içeren senaryonun daha tercih edilebilir olduğu ortaya konmuştur. Aydınlatma açısından bakıldığında tüm senaryolarda ortalamada 450 lüks üzerinde aydınlık düzeyi sağlanmıştır.

Anahtar Kelimeler

• Görünür ışık konum belirleme,RSSI,Trilaterasyon,CDMA

Kaynakça

1. Do, T.-H. and Yoo, M. 2016. An in-depth survey of visible light communication based positioning systems, Sensors, 16, 5, pp. 1–40. https://doi.org/10.3390/s16050678
2. Khan, L.U. 2017. Visible light communication: Applications, architecture, standardization and research challenges, Digital Communications and Networks, 3, 2, pp. 78–88. https://doi.org/10.1016/j.dcan.2016.07.004
3. Tanaka, T. and Haruyama, S. 2009. New position detection method using image sensor and visible light LEDs, in Proc. IEEE 2nd Int. Conf., pp. 150–153, Dubai, United Arab Emirates. https://doi.org/10.1109/ICMV.2009.44
4. Hann, S., Kim, J.-H., Jung, S.-Y., and Park, C.-S. 2010. White led ceiling lights positioning systems for optical wireless indoor applications, in Proc. 36th Eur. Conf. Exhib. Opt. Commun., pp. 1–3, Torino, Italy. https://doi.org/10.1109/ECOC.2010.5621490
5. Lou, P., Zhang, H., Zhang, X., Yao, M. and Xu, Z. 2012. Fundamental analysis for indoor visible light positioning system, in Proc. 1st IEEE Int. Conf. Commun. China Workshops, pp. 59–63, Bejing, China. https://doi.org/10.1109/ICCCW.2012.6316475
6. Lee, Y. U. and Kavehrad, M. 2012. Two hybrid positioning system design techniques with lighting LEDs and ad-hoc wireless network, IEEE Trans. Consumer Electron., 58, 4, pp. 1176–1184. https://doi.org/10.1109/TCE.2012.6414983
7. Yasir, M., Ho, S.-W., and Vellambi, B. 2014. Indoor positioning system using visible light and accelerometer, J. Lightw. Technol., 32, 19, pp. 3306–3316. https://doi.org/10.1109/JLT.2014.2344772
8. Hassan, N. U., Naeem, A., Pasha, M. A., Jadoon, T., and Yuen, C. 2015. Indoor positioning using visible LED lights: A survey,'' ACM Comput. Surveys, 48, 2, pp. 1–32. https://doi.org/10.1145/2835376

9. Zhuang, Y., and et. al., 2018. A Survey of Positioning Systems Using Visible LED Lights, IEEE Comm. Surveys Tutorials, 20, 3, pp. 1963–1988. https://doi.org/10.1109/COMST.2018.2806558
10. Hui, L., Darabi, H., Banerjee, P., and Jing, L. 2007. Survey of wireless indoor positioning techniques and systems, IEEE Trans. Syst., Man, Cybern., 37, 1, pp. 1067–1080. https://doi.org/10.1109/TSMCC.2007.905750
11. Ziyan, J. 2012. A visible light communication based hybrid positioning method for wireless sensor network, in Second Int. Conf. on Intelligent System Design and Engineering Application (ISDEA), pp. 1367–1370, Sanya, Hainan, China. https://doi.org/10.1109/ISdea.2012.411
12. Hyun-Seung K. and et al., 2013. An indoor visible light communication positioning system using a RF carrier allocation technique, J. Lightwave Technol., 31, pp. 134–144. https://doi.org/10.1109/JLT.2012.2225826
13. Yang, S.-H., and et al., 2013. Indoor three-dimensional location estimation based on LED visible light communication, Electron. Lett., 49, 1, pp. 54–56. https://doi.org/10.1049/el.2012.3167
14. Li, L., Hu, P., Peng, C., Shen, G., and Zhao, F. 2014. Epsilon: A visible light based positioning system, in Proc. 11th USENIX Symp. Netw. Syst. Design Implement. (NSDI), pp. 331–343, Seattle, WA, USA.
15. Zhang, W., Chowdhury, M. I. S., and Kavehrad, M., 2014. Asynchronous indoor positioning system based on visible light communications,'' Opt. Eng., 53, 4, pp. 1–10. https://doi.org/10.1117/1.OE.53.4.045105
16. Mohammed, N. A., and Elkarim, M. A. 2015. Exploring the effect of diffuse reflection on indoor localization systems based on RSSI-VLC, Opt. Exp., 23, 16, pp. 20297–20313. https://doi.org/10.1364/OE.23.020297
17. Gu, W., Aminikashani, M., Deng, P., and Kavehrad, M. 2016. Impact of multipath reflections on the performance of indoor visible light positioning systems, J. Lightw. Technol., 34, 10, pp. 2578–2587. https://doi.org/10.1109/JLT.2016.2541659
18. Tang, W., Zhang, J., Chen, B., Liu, Y., et. al, 2017. Analysis of indoor VLC positioning system with multiple reflections,'' in 16th Int. Conf. on Optical Comm. and Networks (ICOCN), pp. 1–3, Wuzhen, China. https://doi.org/10.1109/ICOCN.2017.8121297
19. Mousa, F. I. K. and et. al,. 2018. Indoor visible light communication localization system utilizing received signal strength indication technique and trilateration method, Optical Engineering, 57, 1, pp. 1–10. https://doi.org/10.1117/1.OE.57.1.016107
20. Xu, Y., and et. al., 2017. Accuracy analysis and improvement of visible light positioning based on VLC system using orthogonal frequency division multiple access, Optics Express, 25, 26, pp. 32618–32630. https://doi.org/10.1364/OE.25.032618
21. Lausnay, S. D. and et al., 2015. Influence of MAI in a CDMA VLP system,'' in Proc. International Conference on Indoor Positioning and Indoor Navigation (IPIN), Banff, AB, Canada. https://doi.org/10.1109/IPIN.2015.7346949
22. Qiu, Y., and et al., 2018. Visible Light Communications Based on CDMA Technology,'' IEEE Wireless Communications, 25, 2, pp. 178–185. https://doi.org/10.1109/MWC.2017.1700051
23. Grubor, J., and et., al. 2008. Broadband Information Broadcasting Using LED-Based Interior Lighting, J. Lightw. Technol., 26, 24, pp. 3883–3892. https://doi.org/10.1109/JLT.2008.928525
24. Lee, K., Park, H., and Barry, J. 2011. Indoor Channel Characteristics for Visible Light Communications, IEEE Commun. Lett., 15, 2, pp. 217–219. https://doi.org/10.1109/LCOMM.2011.010411.101945
25. Ding, J.P. and Ji, Y.F. 2012. Evolutionary algorithm-based optimisation of the signal-to-noise ratio for indoor visible-light communication utilising white light-emitting diode, IET Optoelectronics, 6, 6, pp. 307–317. https://doi.org/10.1049/iet-opt.2012.0044
26. Xueli, Z., Jingyuan, D., Yuegang, F., and Ancun, S. 2014. Theoretical accuracy analysis of indoor visible light communication positioning system based on received signal strength indicator, J. Lightwave Technol., 32, 21, pp. 4180–4186. https://doi.org/10.1109/JLT.2014.2349530