Ammonium Removal from Aqueous Solutions Using Cation Exchange Resin

Abstract

Ammonium is one of the main factors responsible for eutrophication of water bodies. Purolite SSTC60 ion exchange resin was used to investigate its potential use on ammonium removal efficiency. The effects of important parameters affecting ion exchange such as ion exchange resin dosage, initial solution pH, temperature, mixing speed and initial ammonium concentration on ammonium removal were investigated. The highest ammonium removal was achieved at pH 7. It was determined that ammonium removal rates increased with resin dosage, mixing speed and temperature increase. It has been determined that temperatures higher than 20°C and mixing speed do not have a significant effect on ammonium removal efficiencies at equilibrium. It was observed that removal efficiencies decreased with increasing initial ammonium concentrations. Pseudo-first order and pseudo-second order kinetic equations were analyzed using nonlinear method to determine the most appropriate kinetic model for ammonium ion removal and found to be compatible with the pseudo-first order kinetic model. Finally, the evaluation of experimental data using nonlinear forms of Langmuir and Freundlich isotherm models determined that the adsorption data fit the Freundlich isotherm model rather than the Langmiur isotherm model. 

Keywords

• Ammonium removal
• Ion exchange
• Eutrophication
• Kinetic
• Purolite SSTC60

Katyon Değişim Reçinesi Kullanarak Sulu Çözeltilerden Amonyum Giderimi

Öz

Amonyum, su kütlelerinin ötrofikasyonundan sorumlu temel faktörlerden biridir. Amonyum giderim etkinliği üzerindeki potansiyel kullanımını araştırmak amacıyla Purolite SSTC60 iyon değiştirici reçine kullanılmıştır. İyon değiştirici reçine dozajı, başlangıç çözelti pH’ı, sıcaklık, karıştırma hızı ve başlangıç amonyum konsantrasyonu gibi iyon değişimini etkileyen önemli parametrelerin amonyum giderimi üzerine etkisi araştırıldı. Çeşitli pH değerlerinde yapılan kesikli deneyler sonucunda pH 7 değerinde en yüksek amonyum giderimi sağlanmıştır. Reçine dozajı, karıştırma hızı ve sıcaklık artışı ile amonyum giderim hızlarının arttığı belirlenmiştir. Giderim verimleri açısında başlangıç amonyum konsantrasyonunun artışı ile giderim verimleri azalmaktadır. 20°C’den daha yüksek sıcaklıkların ve karıştırma hızının denge anında ki amonyum giderim verimleri üzerine çok fazla bir etkisi olmadığı belirlenmiştir. Daha sonra amonyum iyonlarının Purolite SSTC60 iyon değişim reçinesi ile gideriminde en uygun kinetik denklemi belirlemek üzere yalancı birinci derece ve yalancı ikinci derece kinetik denklemler lineer olmayan yöntem kullanılarak analiz edildi. Sonuçlar amonyumun iyon değiştirme prosesi ile gideriminde, yalancı birinci dereceden kinetik model ile daha iyi aydınlatılabileceğini ortaya koymuştur.

Anahtar Kelimeler

• Amonyum giderimi
• İyon değişimi
• Ötrofikasyon
• Kinetik
• Purolite SSTC60

Kaynakça

1. Alshameri, A., Ibrahim, A., Assabri, A.M., Lei, X., Wang, H., & Yan, C. (2014). The investigation into the ammonium removal performance of Yemeni natural zeolite: Modification, ion exchange mechanism, and thermodynamics. Powder Technology, 258, 20–31.
2. Aşçi, B., Kövenç, E., Arar, Ö., & Arda, M. (2018). Kinetic, isotherm and thermodynamic investigations of nitrite (NO2-) removal from water by anion exchange resins. Global Nest Journal, 20, 368–372.
3. Awual, M.R., & Jyo, A. (2011). Assessing of phosphorus removal by polymeric anion exchangers. Desalination, 281, 111–117.
4. Aydin, Ö., Özmetin, C., Korkmaz, M., & Fil, B.A. (2017). A semiempirical kinetic model for removal of iron (Fe3+) from saturated boric acid solution by ion exchange using amberlite IR–120 resin. Particulate Science and Technology, 35, 505–511.
5. Bahmani, M., Dashtian, K., Mowla, D., Esmaeilzadeh, F., & Ghaedi, M. (2020). UiO-66(Ti)-Fe3O4-WO3 photocatalyst for efficient ammonia degradation from wastewater into continuous flow-loop thin film slurry flat-plate photoreactor. Journal Hazardous Materials, 393, 122360.
6. Bashir, M.J.K., Aziz, H.A., Yusoff, M.S., & Adlan, M.N. (2010). Application of response surface methodology (RSM) for optimization of ammoniacal nitrogen removal from semi-aerobic landfill leachate using ion exchange resin. Desalination, 254, 154–161.
7. Bermejo, M.D., Cantero, F., & Cocero, M.J. (2008). Supercritical water oxidation of feeds with high ammonia concentrations. Pilot plant experimental results and modeling. Chemical Engineering Journal, 137, 542–549.
8. Blanchard, G., Maunaye, M., & Martin, G. (1984). Removal of heavy metals from waters by means of natural zeolites. Water Research, 18, 1501–1507.

9. Bonmatí, A., & Flotats, X. (2003). Air stripping of ammonia from pig slurry: Characterisation and feasibility as a pre- or post-treatment to mesophilic anaerobic digestion. Waste Management, 23, 261–272.
10. Caetano, M., Valderrama, C., Farran, A., & Cortina, J.L. (2009). Phenol removal from aqueous solution by adsorption and ion exchange mechanisms onto polymeric resins. Journal of Colloid and Interface Science, 338, 402–409.
11. Carrera, J., Baeza, J.A., Vicent, T., & Lafuente, J. (2003). Biological nitrogen removal of high-strength ammonium industrial wastewater with two-sludge system. Water Research, 37, 4211–4221.
12. Cheng, P., Chen, D., Liu, H., Zou, X., Wu, Z., Xie, J., Qing, C., Kong, D., & Chen, T. (2018). Synergetic effects of anhydrite and brucite-periclase materials on phosphate removal from aqueous solution. Journal of Molecular Liquids, 254, 145–153.
13. Chung, S., Chung, J., & Chung, C. (2020). Enhanced electrochemical oxidation process with hydrogen peroxide pretreatment for removal of high strength ammonia from semiconductor wastewater. Journal of Water Process Engineering, 37, 101425.
14. Darracq, G., Baron, J., & Joyeux, M. (2014). Kinetic and isotherm studies on perchlorate sorption by ion-exchange resins in drinking water treatment. Journal of Water Process Engineering, 3, 123–131.
15. Değermenci, N., Ata, O.N., & Yildiz, E. (2012). Ammonia removal by air stripping in a semi-batch jet loop reactor. Journal of Industrial and Engineering Chemistry, 18, 399–404.
16. Ding, Y., & Sartaj, M. (2016). Optimization of ammonia removal by ion-exchange resin using response surface methodology. International Journal of Environmental Science and Technology, 13, 985–994.
17. Hazwani-Oslan, S.N., Tan, J.S., Saad, M.Z., Halim, M., & Ariff, A.B. (2017). Improved cultivation of gdhA derivative Pasteurella multocida B:2 for high density of viable cells through in situ ammonium removal using cation-exchange resin for use as animal vaccine. Process Biochemistry, 56, 1–7.
18. Jorgensen, T.C., & Weatherley, L.R. (2006). Continuous removal of ammonium ion by ion exchange in the presence of organic compounds in packed columns. Journal of Chemical Technology and Biotechnology, 81, 1151–1158.
19. Kalaruban, M., Loganathan, P., Shim, W.G., Kandasamy, J., Naidu, G., Nguyen, T.V., & Vigneswaran, S. (2016). Removing nitrate from water using iron-modified Dowex 21K XLT ion exchange resin: Batch and fluidised-bed adsorption studies. Separation and Purification Technology, 158, 62–70.
20. Korkmaz, M., Özmetin, C., & Fil, B.A. (2016). Modelling of Boron Removal from Solutions Using Purolite S 108 in a Batch Reactor. Clean - Soil Air Water, 44, 949–958.
21. Körner, S., Das, S.K., Veenstra, S., & Vermaat, J.E. (2001). The effect of pH variation at the ammonium/ammonia equilibrium in wastewater and its toxicity to Lemna gibba. Aquatic Botany, 71, 71–78.
22. Lima, É. C., Adebayo, M. A., & Machado, F. M. (2015). Kinetic and equilibrium models of adsorption. In Carbon nanomaterials as adsorbents for environmental and biological applications (pp. 33-69). Springer, Cham.
23. Lin, J., & Wang, L. (2009). Comparison between linear and non-linear forms of pseudo-first-order and pseudo-second-order adsorption kinetic models for the removal of methylene blue by activated carbon. Frontiers of Environmental Science and Engineering, 3, 320–324.
24. Lin, L.C., & Juang, R.S. (2007). Ion-exchange kinetics of Cu(II) and Zn(II) from aqueous solutions with two chelating resins. Chemical Engineering Journal, 132, 205–213.
25. Liu, R., Chi, L., Wang, X., Sui, Y., Wang, Y., & Arandiyan, H. (2018). Review of metal (hydr)oxide and other adsorptive materials for phosphate removal from water. Journal of Environmental Chemical Engineering, 6, 5269–5286.
26. Mondor, M., Masse, L., Ippersiel, D., Lamarche, F., & Massé, D.I. (2008). Use of electrodialysis and reverse osmosis for the recovery and concentration of ammonia from swine manure. Bioresource Technology, 99, 7363–7368.
27. Nur, T., Shim, W.G., Loganathan, P., Vigneswaran, S., & Kandasamy, J. (2015). Nitrate removal using Purolite A520E ion exchange resin: batch and fixed-bed column adsorption modelling. International Journal of Environmental Science and Technology, 12, 1311–1320.
28. Paul Chen, J., Chua, M.L., & Zhang, B. (2002). Effects of competitive ions, humic acid, and pH on removal of ammonium and phosphorous from the synthetic industrial effluent by ion exchange resins. Waste Management, 22, 711–719.
29. Lagergren, S.K. (1898). About the theory of so-called adsorption of soluble substances. Kungliga Svenska Vetenskaps akademiens Handlingar, 24, 1–39.
30. Saltali, K., Sari, A., & Aydin, M. (2007). Removal of ammonium ion from aqueous solution by natural Turkish (Yıldızeli) zeolite for environmental quality. Journal Hazardous Materials, 141, 258–263.
31. Simonin, J.P. (2016). On the comparison of pseudo-first order and pseudo-second order rate laws in the modeling of adsorption kinetics. Chemical Engineering Journal, 300, 254–263.
32. Taşdemir, A., Cengiz, İ., Yildiz, E., & Bayhan, Y.K. (2020). Investigation of ammonia stripping with a hydrodynamic cavitation reactor. Ultrasonics Sonochemistry 60, 104741.
33. Uludag-Demirer, S., Demirer, G.N., & Chen, S. (2005). Ammonia removal from anaerobically digested dairy manure by struvite precipitation. Process Biochemistry, 40, 3667–3674.
34. Víctor-Ortega, M.D., Ochando-Pulido, J.M., & Martínez-Ferez, A. (2016). Thermodynamic and kinetic studies on iron removal by means of a novel strong-acid cation exchange resin for olive mill effluent reclamation. Ecological Engineering, 86, 53–59.
35. Wen, Z., Huang, K., Niu, Y., Yao, Y., Wang, S., Cao, Z., & Zhong, H. (2019). Kinetic study of ultrasonic-assisted uranium adsorption by anion exchange resin. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 585, 124021.