Araştırma Makalesi
BibTex RIS Kaynak Göster

Tetra Kiral ve İçe Girintili Çarpışma Kutularının Çarpışma Performanslarının İncelenmesi

Yıl 2021, Sayı: 24, 161 - 168, 15.04.2021
https://doi.org/10.31590/ejosat.901494

Öz

Çarpışma kutuları; taşıtlarda kullanılan, kaza anında ortaya çıkan enerjiyi sönümleyen pasif güvenlik sistemleridir. Bu enerji sönümleme kabiliyeti sayesinde yolcuların çarpışmadan mümkün olduğu kadar az etkilenmesini sağlar. Bu çalışmada, negatif Poisson oranına sahip yapılardan olan “Tetra Kiral” ve “İçe Girintili” tasarımlar ele alınmış, bu tasarımlardan silindir ve kare kesite sahip çarpışma kutuları oluşturularak çarpışma performansları incelenmiştir. Çalışma kapsamında öncelikle, çarpışma kutusu üretiminde kullanılacak olan 6061-T6 alüminyum malzemenin özeliklerini belirlemek için çekme testleri yapılmıştır. Ardından, çarpışma kutularının performanslarını belirlemek için LS-DYNA yazılımı ile sonlu elemanlar analizleri yapılmıştır. Elde edilen analiz sonuçlarına göre; kare kesite sahip içe girintili çarpışma kutusunun en yüksek özgül enerji emilimine sahip olduğu, kare kesite sahip tetra kiral çarpışma kutusunun ise en küçük tepe ezilme kuvveti değerine ve en yüksek ezilme kuvveti verimi değerine sahip olduğu gözlenmiştir.

Kaynakça

  • Acar, E., Altin, M., Güler, M.A. (2019). Evaluation of various multi-cell design consepts for crashworthiness design of thin-walled aluminium tubes. Thin-Walled Struct. 142:227-235.
  • Harkati, E., Daoudi, N., Bezazi, A., Haddad, A., Scarpa, F. (2017). In-plane elasticity of a multi re-entrant auxetic honeycomb. Compos Struct. 180:130–9.
  • Grima, JN., Manicaro, E., Attard, D. (2011). Auxetic behaviour from connected different-sized squares and rectangles. Proc Math Phys Eng Sci. 467:439–58.
  • Lakes, R. (1993). Materials with structural hierarchy. Nature. 361(6412):511–5.
  • Liu, J., Qin, H., Liu, L. (2018). Dynamic behaviors of phase transforming cellular structures. Compos Struct. 184:536–44.
  • Lu, Q., Qi, D., Li, Y., Xi, D., Wu, Q. (2019). Impact energy absorption performances of ordinary and hierarchical chiral structures. Thin-Walled Structures. 140:495-505.
  • Ma, C., Lei, H., Hua, J., Bai, Y., Liang, J., Fang, D. (2018). Experimental and simulation investigation of the reversible bi-directional twisting response of tetra-chiral cylindrical shells. Composite Struct. 203:142–152.
  • Song, X., Sun, G., Li, G., Gao, W., Li, Q. (2013). Crashworthiness optimization of foam-filled tapered thin-walled structure using multiple surrogate models. Struct Multidisciplinary Optim. 47(2):221–31.
  • Tanlak, N., P.D. (2014). Shape optimization of thin-walled tubes under high-velocity axial and transverse impact loadings. FBE, Boğaziçi University.
  • Wu, Q., Gao, Y., Wei, X., Mousanezhad, D., Ma, L., Vaziri, A., et al (2018). Mechanical properties and failure mechanisms of sandwich panels with ultra-lightweight three-dimensional hierarchical lattice cores. Int J Solids Struct. 132–133:171–87.

An Investigation of the Crashworthiness Performance of Tetra Chiral and Re-entrant Crush Boxes

Yıl 2021, Sayı: 24, 161 - 168, 15.04.2021
https://doi.org/10.31590/ejosat.901494

Öz

Crash boxes are passive safety systems that are used in vehicles to absorb the energy generated in the event of an accident. Due to their energy absorption capability, they ensure that passengers are affected as little as possible. In this study, "Tetra Chiral" and "Re-entrant" designs, which are structures with negative Poisson's ratio, are discussed, collision performances are investigated by forming collision boxes with cylindrical and square sections from these designs. In this study, first tensile tests are carried out to determine the properties of 6061-T6 aluminum material to be used in crash box production. Then, finite element analyses are performed by using LS-DYNA software to determine the performances of the crash boxes. The results shows that the re-entrant crush box with square cross section has the highest specific energy absorption, while the tetra chiral crush box with square cross-section has the smallest peak crushing force value and the highest crushing force efficiency value.

Kaynakça

  • Acar, E., Altin, M., Güler, M.A. (2019). Evaluation of various multi-cell design consepts for crashworthiness design of thin-walled aluminium tubes. Thin-Walled Struct. 142:227-235.
  • Harkati, E., Daoudi, N., Bezazi, A., Haddad, A., Scarpa, F. (2017). In-plane elasticity of a multi re-entrant auxetic honeycomb. Compos Struct. 180:130–9.
  • Grima, JN., Manicaro, E., Attard, D. (2011). Auxetic behaviour from connected different-sized squares and rectangles. Proc Math Phys Eng Sci. 467:439–58.
  • Lakes, R. (1993). Materials with structural hierarchy. Nature. 361(6412):511–5.
  • Liu, J., Qin, H., Liu, L. (2018). Dynamic behaviors of phase transforming cellular structures. Compos Struct. 184:536–44.
  • Lu, Q., Qi, D., Li, Y., Xi, D., Wu, Q. (2019). Impact energy absorption performances of ordinary and hierarchical chiral structures. Thin-Walled Structures. 140:495-505.
  • Ma, C., Lei, H., Hua, J., Bai, Y., Liang, J., Fang, D. (2018). Experimental and simulation investigation of the reversible bi-directional twisting response of tetra-chiral cylindrical shells. Composite Struct. 203:142–152.
  • Song, X., Sun, G., Li, G., Gao, W., Li, Q. (2013). Crashworthiness optimization of foam-filled tapered thin-walled structure using multiple surrogate models. Struct Multidisciplinary Optim. 47(2):221–31.
  • Tanlak, N., P.D. (2014). Shape optimization of thin-walled tubes under high-velocity axial and transverse impact loadings. FBE, Boğaziçi University.
  • Wu, Q., Gao, Y., Wei, X., Mousanezhad, D., Ma, L., Vaziri, A., et al (2018). Mechanical properties and failure mechanisms of sandwich panels with ultra-lightweight three-dimensional hierarchical lattice cores. Int J Solids Struct. 132–133:171–87.
Toplam 10 adet kaynakça vardır.

Ayrıntılar

Birincil Dil Türkçe
Konular Mühendislik
Bölüm Makaleler
Yazarlar

Cüneyt Aktaş 0000-0002-3971-3257

Erdem Acar 0000-0002-3661-5563

Mehmet Güler 0000-0002-1159-556X

Murat Altin 0000-0002-2404-2614

Yayımlanma Tarihi 15 Nisan 2021
Yayımlandığı Sayı Yıl 2021 Sayı: 24

Kaynak Göster

APA Aktaş, C., Acar, E., Güler, M., Altin, M. (2021). Tetra Kiral ve İçe Girintili Çarpışma Kutularının Çarpışma Performanslarının İncelenmesi. Avrupa Bilim Ve Teknoloji Dergisi(24), 161-168. https://doi.org/10.31590/ejosat.901494