Akımsız Ni-P-W Kompozit Kaplamalarda PTFE Konsantrasyonunun Sertlik ve Aşınma Üzerinde Etkisi

Yıl 2021, Sayı: 28, 1356 - 1359, 30.11.2021

Serdar Aslan , Erhan Duru

https://doi.org/10.31590/ejosat.1016986

Öz

Bu çalışmada politetrafloroetilen (PTFE) takviyeli Ni-P-W kompozit kaplamalar alkalin bir banyoda akımsız yöntemle üretilmiştir. Kompozit kaplamalar için PTFE konsantrasyonu sırası ile 5, 10 ve 20 g/L seçilmiştir. Üretilen kaplamaların yüzey mikroyapısı Taramalı Elektron Mikroskobu (SEM) ile kimyasal analizi ise X-Işınları Kırınımı (XRD) yöntemiyle yapılmıştır. Farklı PTFE konsantrasyonları ile üretilen kompozit kaplamaların ortalama mikro sertlik değerleri sırasıyla 513±22 HV, 494±17 HV ve 392±25 HV olarak ölçülmüştür. Oda sıcaklığında kuru ortamda yapılan aşınmalarda en düşük sürtünme katsayısı 0.232 µ ile PTFE konsantrasyonun 10 g/L olduğu kaplamada görülmüştür. Konsantrasyonun 20 g/L çıkarılmasıyla ortalama sürtünme katsayısında yaklaşık % 60 oranında bir artışla 0.375 µ olmuştur.

Anahtar Kelimeler

Akımsız Kaplama, PTFE, Tungsten, Aşınma, Sertlik

Teşekkür

Sakarya Üniversitesi Araştırma Geliştirme Merkezine (SARGEM) bize laboratuvar imkanlarını açtığı için teşekkür ederiz.

Effect of PTFE Concentration on Microhardness and Wear Behavior in Ni-P-W-PTFE Composite Coatings by Electroless Deposition

Öz

In this study, polytetrafluoroethylene (PTFE) reinforced Ni-P-W composite coatings were produced by electroless method in an alkaline bath. For the composite coatings, the PTFE concentration was chosen as 5, 10 and 20 g/L, respectively. The surface microstructure of the produced coatings was made by Scanning Electron Microscope (SEM) and chemical analysis was done by X-Ray Diffraction (XRD) method. The mean microhardness values of the composite coatings produced with different PTFE concentrations were measured as 513±22 HV, 494±17 HV and 392±25 HV, respectively. The lowest coefficient of friction in wear at room temperature was found to be 0.232 µ in the coating with a PTFE concentration of 10 g/L. By increasing the concentration by 20 g/L, the average friction coefficient increased by approximately 60% to 0.375 µ.

Anahtar Kelimeler

Electroless Coating, PTFE, Tungsten, Wear, Hardness

Kaynakça

• Akyol, A., Algul, H., Uysal, M., Akbulut, H., & Alp, A. (2018). A novel approach for wear and corrosion resistance in the electroless Ni-P-W alloy with CNFs co-depositions. Applied Surface Science, 453(December 2017), 482–492. https://doi.org/10.1016/j.apsusc.2018.05.152
• Akyol, A., Algul, H., Uysal, M., Akbulut, H., & Alp, A. (2018). A novel approach for wear and corrosion resistance in the electroless Ni-P-W alloy with CNFs co-depositions. Applied Surface Science, 453(December 2017), 482–492. https://doi.org/10.1016/j.apsusc.2018.05.152
• Akyol, Abdülkadir, Algül, H., Bilaç, O., Ulu, S., Gül, H., Uysal, M., Çay, Y., & Alp, A. (2019). Elektrolitik Sert Metal Kaplamaya Alternatif Çevreye Duyarlı Ni-P Kaplamaların 6061 Serisi Alüminyum Altlık Üzerine Akımsız Yöntemle Biriktirilmesinde Sodyum hipofosfit, Sıcaklık ve Zamanın Etkisi. Academic Platform Journal of Engineering and Science, 7(3), 442–448. https://doi.org/10.21541/apjes.478232
• Aslan, S., & Duru, E. (2021). Microstructure and Wear Properties of Electrodeposited Ni-B-Al2O3 Composite Coating on Low Carbon Steel at Elevated Temperature. Journal of Materials Engineering and Performance, Ref 8. https://doi.org/10.1007/s11665-021-06290-2
• Balaraju, J. N., & Rajam, K. S. (2005). Electroless deposition of Ni–Cu–P, Ni–W–P and Ni–W–Cu–P alloys. Surface and Coatings Technology, 195(2–3), 154–161. https://doi.org/10.1016/j.surfcoat.2004.07.068
• Czagány, M., Baumli, P., & Kaptay, G. (2017). The influence of the phosphorous content and heat treatment on the nano-micro-structure, thickness and micro-hardness of electroless Ni-P coatings on steel. Applied Surface Science, 423, 160–169. https://doi.org/10.1016/j.apsusc.2017.06.168
• Doğan, F., Duru, E., Uysal, M., Akbulut, H., & Aslan, S. (2020). Investıgatıon of mechanıcal and trıbologıcal characterıstıcs of ni-b coatıngs deposıted on steel. Journal of Boron, 6(1), 209–215. https://doi.org/10.30728/boron.762584
• Doğan, F., Uysal, M., Algül, H., Duru, E., Akbulut, H., & Aslan, S. (2020). Optimization of pulsed electro co-deposition for Ni-B-TiN composites and the variation of tribological and corrosion behaviors. Surface and Coatings Technology, 400(June), 126209. https://doi.org/10.1016/j.surfcoat.2020.126209
• Duru, E., Doğan, F., Uysal, M., Akbulut, H., & Aslan, S. (2021). Optimization of Ni-B coating bath and effect of DMAB concentration on hardness and wear. Surfaces and Interfaces, 22(June 2020), 100880. https://doi.org/10.1016/j.surfin.2020.100880
• Feng, L., Zhang, Y., Wen, C., Lı, S., Lı, J., Cheng, D., Baı, J., Cuı, Q., & Zhang, L. (2021). Effect of initial deposition behavior on properties of electroless Ni–P coating on ZK60 and ME20 magnesium alloys. Transactions of Nonferrous Metals Society of China, 31(8), 2307–2322. https://doi.org/10.1016/S1003-6326(21)65656-X
• Ger, M.-D., & Hwang, B. J. (2002). Effect of surfactants on codeposition of PTFE particles with electroless Ni-P coating. Materials Chemistry and Physics, 76(1), 38–45. https://doi.org/10.1016/S0254-0584(01)00513-2
• Gültekin, D., Duru, E., & Akbulut, H. (2021). Improved wear behaviors of lead-free electroless Ni[sbnd]B and Ni-B/CeO2 composite coatings. Surface and Coatings Technology, 422(July). https://doi.org/10.1016/j.surfcoat.2021.127525
• Haag, S., Burgard, M., & Ernst, B. (2006). Pure nickel coating on a mesoporous alumina membrane: Preparation by electroless plating and characterization. Surface and Coatings Technology, 201(6), 2166–2173. https://doi.org/10.1016/j.surfcoat.2006.03.023
• Huang, Y. S., Zeng, X. T., Annergren, I., & Liu, F. M. (2003). Development of electroless NiP–PTFE–SiC composite coating. Surface and Coatings Technology, 167(2–3), 207–211. https://doi.org/10.1016/S0257-8972(02)00899-X
• Luo, H., Leitch, M., Zeng, H., & Luo, J.-L. (2018). Characterization of microstructure and properties of electroless duplex Ni-W-P/Ni-P nano-ZrO2 composite coating. Materials Today Physics, 4, 36–42. https://doi.org/10.1016/j.mtphys.2018.03.001
• Matik, U., & Citak, R. (2011). Düşük Fosforlu Akımsız Ni - P Kaplanmış AISI 1020 Çeliğinin Adhesiv A şınma Karakteristikleri nin İncelenmesi. May. Ramalho, A., & Miranda, J. C. (2005). Friction and wear of electroless NiP and NiP+PTFE coatings. Wear, 259(7–12), 828–834. https://doi.org/10.1016/j.wear.2005.02.052
• Sürdem, S., Eseroğlu, C., & Çitak, R. (2019). A parametric study on the relationship between NaBH 4 and tribological properties in the nickel-boron electroless depositions. Materials Research Express, 6(12), 125085. https://doi.org/10.1088/2053-1591/ab5beb
• Ürdem, Ş., Duru, E., Algül, H., Uysal, M., & Akbulut, H. (2021). Evaluation of high temperature tribological behavior of electroless deposited NiB–Al2O3 coating. Wear, 482–483(May), 203960. https://doi.org/10.1016/j.wear.2021.203960
• Uysal, M., Algül, H., Duru, E., Kahraman, Y., Alp, A., & Akbulut, H. (2021). Tribological properties of Ni–W–TiO2–GO composites produced by ultrasonically–assisted pulse electro co–deposition. Surface and Coatings Technology, 410(February), 126942. https://doi.org/10.1016/j.surfcoat.2021.126942
• Vitry, V., & Delaunois, F. (2015). Nanostructured electroless nickel-boron coatings for wear resistance. In Anti-Abrasive Nanocoatings (pp. 157–199). Elsevier. https://doi.org/10.1016/B978-0-85709-211-3.00007-8
• Yildiz, R. A., Genel, K., & Gulmez, T. (2021). Effect of electroless Ni-B and Ni-W-B coatings on the corrosion-fatigue behaviour of 7075 Al alloy. International Journal of Fatigue, 144(July 2020), 106040. https://doi.org/10.1016/j.ijfatigue.2020.106040