AN EXPERIMENTAL AND THEORITICAL STUDY ON THE PRESSURE DROP OF FLUID AT EXTRUSION PROCESS

İbrahim Savaş Dalmış; Ümit Güler; Alper Karakoca; Sait Özmen Eruslu

doi:10.17339/ejovoc.96995

AN EXPERIMENTAL AND THEORITICAL STUDY ON THE PRESSURE DROP OF FLUID AT EXTRUSION PROCESS

Öz

This paper investigated the pressure drop during the extrusion processes. The objectives of this investigation were to increase efficiency of plastic extrusion which plastic equipment produced. In the experimental processes, two rectangular dies were used. HD 7255 thermoplastic was used as the fluid material of extrusion. A difference occurred between inlet and outlet. This difference was 2.34 MPa in terms of the pressure drop and was 0.001216 (kg s^-1) in terms of the flow rate. The results of power law model is found in good agreement with experimental results for outlet sections of process.

Kaynakça

Baldi, F.; Franceschini, A.; Briatico-Vangosa, F.; Locati, D. and Riccò, T. 2010. Oscillating flow in
capıllary dies for a HDPE melt: effects of extrusion parameters. Int J Mater Form vol. 3 Suppl
:543– 546
Burghelea, T.I.; Griess, H.J. and Münstedt, H. 2010. Comparative investigations of surface
instabilities (“sharkskin”) of a linear and a long-chain branched polyethylene. Journal of Non-
Newtonian Fluid Mechanics, vol. 165, Issues 19–20, pp. 1093–1104
Carneiro, O. S., Nobrega, J. M., Pinho, F. T., Computer aided rheological design of extrusion dies for
profiles, Journal of materials processing technology, 114, pp. 75–86, 2001.

Carneiro, O. S., Nobrega, J. M., Recent developments in automatic die design for profile extrusion,
Plastics Rubber and Composites, 33, pp. 400-408, 2004.
Dubbeldam, J.L.A. and Molenaar, J. 2003. Dynamics of the spurt instability in polymer extrusion. J.
Non-Newtonian Fluid Mech. 112: 217–235
D.M. and Tang, H.S. 2007. Inverse problem solution of squeeze flow for parameters of generalized
Newtonian fluid and wall slip. Journal of Non-Newtonian Fluid Mechanics, 143: 133–140
Ferrás, L.L. Nóbrega, J.M. and Pinho F.T. 2012. Analytical solutions for Newtonian and inelastic non-
Newtonian flows with wall slip. Journal of Non-Newtonian Fluid Mechanics, 175–176: 76–88
Kostic, M. M., Reifschneider, L. G., Design of Extrusion Dies, Encyclopedia of Chemical Processing,
pp. 633-649, 2006.
Mitsoulis, E.; Georgiou, G.C. and Kountouriotis, Z. 2012. A study of various factors affecting Kalyon,
Newtonian extrudate swell. Computers & Fluids, 57: 195–207
Rahimia, S.; Durbanb, D. and Khosid, S. 2010. Wall friction effects and viscosity reduction of gel
propellants in conical extrusion. Journal of Non-Newtonian Fluid Mechanics, 165: 782–792
Xu, X.; Ouyang, J.; Yang, B. and Liu, Z. 2013. SPH simulations of three-dimensional non-Newtonian
free surface flows. Comput. Methods Appl. Mech. Engrg. 256: 101–116

Ayrıntılar

Birincil Dil

Türkçe

Konular

-

Bölüm

-

Yazarlar

İbrahim Savaş Dalmış

Ümit Güler Bu kişi benim

Alper Karakoca Bu kişi benim

Sait Özmen Eruslu

Yayımlanma Tarihi

28 Aralık 2015

Gönderilme Tarihi

28 Aralık 2015

Kabul Tarihi

-

Yayımlandığı Sayı

Yıl 2015 Cilt: 5 Sayı: 4

DOI

https://doi.org/10.17339/ejovoc.96995

IZ

https://izlik.org/JA42MW86SU

Kaynak Göster

RIS / Bibtex

APA

Dalmış, İ. S., Güler, Ü., Karakoca, A., & Eruslu, S. Ö. (2015). AN EXPERIMENTAL AND THEORITICAL STUDY ON THE PRESSURE DROP OF FLUID AT EXTRUSION PROCESS. Ejovoc (Electronic Journal of Vocational Colleges), 5(4), 70-77. https://doi.org/10.17339/ejovoc.96995

AMA

1.Dalmış İS, Güler Ü, Karakoca A, Eruslu SÖ. AN EXPERIMENTAL AND THEORITICAL STUDY ON THE PRESSURE DROP OF FLUID AT EXTRUSION PROCESS. Ejovoc. 2015;5(4):70-77. doi:10.17339/ejovoc.96995

Chicago

Dalmış, İbrahim Savaş, Ümit Güler, Alper Karakoca, ve Sait Özmen Eruslu. 2015. “AN EXPERIMENTAL AND THEORITICAL STUDY ON THE PRESSURE DROP OF FLUID AT EXTRUSION PROCESS”. Ejovoc (Electronic Journal of Vocational Colleges) 5 (4): 70-77. https://doi.org/10.17339/ejovoc.96995.

EndNote

Dalmış İS, Güler Ü, Karakoca A, Eruslu SÖ (01 Aralık 2015) AN EXPERIMENTAL AND THEORITICAL STUDY ON THE PRESSURE DROP OF FLUID AT EXTRUSION PROCESS. Ejovoc (Electronic Journal of Vocational Colleges) 5 4 70–77.

IEEE

[1]İ. S. Dalmış, Ü. Güler, A. Karakoca, ve S. Ö. Eruslu, “AN EXPERIMENTAL AND THEORITICAL STUDY ON THE PRESSURE DROP OF FLUID AT EXTRUSION PROCESS”, Ejovoc, c. 5, sy 4, ss. 70–77, Ara. 2015, doi: 10.17339/ejovoc.96995.

ISNAD

Dalmış, İbrahim Savaş - Güler, Ümit - Karakoca, Alper - Eruslu, Sait Özmen. “AN EXPERIMENTAL AND THEORITICAL STUDY ON THE PRESSURE DROP OF FLUID AT EXTRUSION PROCESS”. Ejovoc (Electronic Journal of Vocational Colleges) 5/4 (01 Aralık 2015): 70-77. https://doi.org/10.17339/ejovoc.96995.

JAMA

1.Dalmış İS, Güler Ü, Karakoca A, Eruslu SÖ. AN EXPERIMENTAL AND THEORITICAL STUDY ON THE PRESSURE DROP OF FLUID AT EXTRUSION PROCESS. Ejovoc. 2015;5:70–77.

MLA

Dalmış, İbrahim Savaş, vd. “AN EXPERIMENTAL AND THEORITICAL STUDY ON THE PRESSURE DROP OF FLUID AT EXTRUSION PROCESS”. Ejovoc (Electronic Journal of Vocational Colleges), c. 5, sy 4, Aralık 2015, ss. 70-77, doi:10.17339/ejovoc.96995.

Vancouver

1.İbrahim Savaş Dalmış, Ümit Güler, Alper Karakoca, Sait Özmen Eruslu. AN EXPERIMENTAL AND THEORITICAL STUDY ON THE PRESSURE DROP OF FLUID AT EXTRUSION PROCESS. Ejovoc. 01 Aralık 2015;5(4):70-7. doi:10.17339/ejovoc.96995