Ballistic impact response of hybrid composite plates

Öz

The behaviors exhibited by materials used in military and civilian daily applications in response to ballistic impacts constitute an important field of study. These behaviors have been investigated experimentally on composite plates with different configurations. For this purpose, Para-Aramid (Kevlar)/epoxy and Para-Aramid (Kevlar)/Glass hybrid composite plates with two different configurations were produced. Specimens obtained from these plates were subjected to tests at velocities corresponding to armor levels IIIA, IIA, and II. As a result of the tests, the effects of the velocities on the target specimens were compared. At the same time, the deformations on the plates were also examined. The study, conducted at three different velocities, yielded positive results from the Para-Aramid (Kevlar)/epoxy composite in the level IIA test, while negative results were obtained from the two hybrid plates. In the levels II and IIIA velocity tests, deformations were observed in the composite plates. Matrix cracks and fiber breakages were detected in the deformations obtained.

Anahtar Kelimeler

• Para-Aramid
• Ballistic impact
• Hybrid composite
• Failure analysis

Proje Numarası

MÜHENDİSLİK.23.005

Teşekkür

This study was carried out with the contributions of the project numbered MÜHENDİSLİK.23.005, supported by DÜBAP.

Kaynakça

1. [1] Muthaiyah, G., Ballistic impact response of laminated hybrid composite materials, Mechanical and Physical Testing of Biocomposites, Fibre-Reinforced Composites and Hybrid Composite. Woodhead Publishing Series in Composites Science and Engineering, (2019), pp. 171-191. DOI:10.1016/B978-0-08-102292-4.00010-2
2. [2] Pandya, K.S., Pothnis, J.R., Ravikumar, G., Naik, N.K., Ballistic impact behavior of hybrid Composites, Materials and Design, 44, (2013), pp. 128–135. DOI:10.1016/j.matdes.2012.07.044
3. [3] Signetti, S., Ryu, S., Pugno, N.M., Impact mechanics of multilayer composite armors: analytical modeling, FEM numerical simulation, and ballistic experiments, Composite Structures, 297 (2022). DOI:10.1016/j.compstruct.2022.115916
4. [4] Kędzierski, P., Popławski, A., Gieleta, R., Morka, A., Sławiński, G., Experimental and numerical investigation of fabric impact behavior, Composites Part B: Engineering, 69 (2015), pp. 452-459. DOI:10.1016/j.compositesb.2014.10.028
5. [5] Deliktaş, B., Poyraz, S., Durmuş, A., Sonlu elamanlar analizi ile kompozit malzemelerin balistik performansının tahmini, XX. Ulusal Mekanik Kongresi, (2017),pp.754-762.
6. [6] Tarım, N., Fındık, F., Uzun, H., Ballistic impact performance of composite structures, Composite Structures, 56 (2002), pp. 13–20. DOI:10.1016/S0263-8223(01)00177-5
7. [7] Choudhury, S., Ramagiri, B., Shah, B.K., Yerramalli, C.S., Guha, A., Ballistic response of woven glass fabric-epoxy composites at low temperatures: Experimental investigation, Composites Part C: 8 (2022), 100263. DOI: 10.1016/j.jcomc.2022.100263
8. [8] Zhikharev, M.V., Sapozhnikov, S.B., Kudryavtsev, O.A., Zhikharev, V.M., Effect of tensile preloading on the ballistic properties of GFRP, Composites Part B: Engineering, 168 (2019), pp. 524-531. DOI: 10.1016/j.compositesb.2019.03.026

9. [9] Naik, N.K., Shrirao, P., Composite structures under ballistic impact, Composite Structures, 66 (2004), pp. 579–590. DOI: 10.1016/j.compstruct.2004.05.006
10. [10] Reddy, P.R.S., Reddy, T.S., Madhua, V., Gogia, A.K., Rao, K.V., Behavior of E-glass composite laminates under ballistic impact, Materials & Design, 84 (2015), pp. 79-86. DOI: 10.1016/j.matdes.2015.06.094
11. [11] Ansari, M.M., Chakrabarti, A., Iqbal, M.A., An experimental and finite element investigation of the ballistic performance of laminated GFRP composite target, Composites Part B, 125 (2017), pp. 211-226. DOI: 10.1016/j.compositesb.2017.05.079
12. [12] Jenq, S.T., Jing, H.S., Chung, C., Predicting the ballistic limit for plain woven glass/epoxy composite laminate, Int. J. Impact Eng 15 (1994), pp. 451-464. DOI: 10.1016/0734-743X(94)80028-8
13. [13] Liu, Q., Guo, B., Chen, P., Su, J., Arab, A., Ding, G., Yan, G., Jiang, H., Guo, F., Investigating ballistic resistance of CFRP/polyurea composite plates subjected to ballistic impact, Thin-Walled Structures, 166 (2021), 108111. DOI: 10.1016/j.tws.2021.108111
14. [14] Sorrentino, L., Bellini, C., Corrado, A., Polini, W., Aricò, İ.R., Ballistic performance evaluation of composite laminates in kevlar 29, Procedia Engineering, 88 (2015), pp. 255-262. DOI: 10.1016/j.proeng.2015.06.048
15. [15] Naik, S., Dandagwhalb, R.D., Loharkar, P.K., A review on various aspects of Kevlar composites used in ballistic applications, Materials Today: Proceedings, 21(2020), pp.1366–1374. DOI: 10.1016/j.matpr.2020.01.176
16. [16] Peng, L., Tan, M.T., Zhang, X., Han, G., Xiong, W., Al Teneiji, M., Guan, Z.W., Investigations of the ballistic response of hybrid composite laminated structures, Composite Structures, 282 (2022), 115019. DOI: 10.1016/j.compstruct.2021.115019
17. [17] Karthick, P., Ramajeyathilagam, K., Numerical study on ballistic impact behavior of hybrid composites, Materials Today: Proceedings, 59 (2022), pp. 995-1003. DOI: 10.1016/j.matpr.2022.02.270
18. [18] Yanen, C., Solmaz, M.Y., Production of Laminated Hybrid Composites As A Body Armor Material And Investigation of Ballistic Performance, El-Cezerî Journal of Science and Engineering, 3(2016), pp. 351-362. DOI: 10.31202/ecjse.264200
19. [19] Bitlisli, B., Yazıcı, M., Investigation of the Ballistic Performances of Composite Materials Used in Armored Vehicles, Uludağ University Faculty of Engineering Journal, 24 (2019), pp. 25-34. DOI: 10.17482/uumfd.494262
20. [20] Alarçin, S., Investigation of ballistic resistance of ultra high density polyethylene and carbon fiber hybrid composites, Technological Applied Sciences, 15 (2020), pp.29-40. DOI: 10.12739/NWSA.2020.15.3.2A0182
21. [21] Sah, A. K., Pathak, R. K., Patel, S., Design and analysis of hybrid composite panels under ballistic impact, Materials Today: Proceedings, 87 (2023), pp. 104-109. DOI:10.1016/j.matpr.2023.02.031
22. [22] Reddy, P. R. S., Reddy, T. S., Mogulanna, K., Srikanth, I., Madhu, V., Rao, K. V., Ballistic Impact Studies on Carbon and E-glass Fibre Based Hybrid Composite Laminates, Procedia Engineering, 173 (2017), pp. 293-298. DOI: 10.1016/j.proeng.2016.12.017
23. [23] Kumar, B. A., Lakshmi, V., Ahmad, S., The effect of hybridization on the ballistic impact behavior of hybrid composite armors, Composites Part B: Engineering, 76 (2015), pp. 300-319. DOI: 10.1016/j.compositesb.2015.03.012
24. [24] Yavaş, M. O., Avcı, A., Şımşır, M., Akdemir, A., Ballistic Performance of Kevlar49/ UHMWPEHB26 Hybrid Layered-Composite, International Journal of Engineering Research and Development, 7 (2015), pp.7-27. DOI: 10.29137/umagd.379789
25. [25] Randjbaran, E., Zahari, R., Jalil, N. A. A., Majid, D. L. A. A., Hybrid Composite Laminates Reinforced with Kevlar/Carbon/Glass Woven Fabrics for Ballistic Impact Testing, The Scientific World Journal, (2014), 413753. DOI: 10.1155/2014/413753
26. [26] Yahaya, R., Sapuan, S.M., Jawaid, M., Leman, Z., Zainudin, E.S., Measurement of ballistic impact properties of woven kenaf–aramid hybrid composites, Measurement, 77(2016), pp. 335-343. DOI: 10.1016/j.measurement.2015.09.016
27. [27] Rajesh, S., Ramnath, B. V., Elanchezhian, C., Abhijith, M., Riju, R. D., Kishan, K. K., Investigation of Tensile Behavior of Kevlar Composite, Materials Today: Proceedings 5(2018), pp. 1156–1161. DOI: 10.1016/j.matpr.2017.11.196
28. [28] National Institute of Justice, Ballistic Resistance of Personal Body Armor NIJ Standard–0101.04. Office of Law Enforcement Standards National Institute of Standards and Technology Gaithersburg, 2001, MD 20899–8102.
29. [29] Pekbey, Y., Aslantaş, K., Yumak, N., Ballistic impact response of Kevlar Composites with filled epoxy matrix, Steel and Composite Structures, 24 (2017), pp. 191-200. DOI: https://doi.org/10.12989/scs.2017.24.2.191