European Journal of Technique
Kapak Resmi
Makale Gönder Hakemlik İsteği Gönder Amaç ve Kapsam Yazım Kuralları Etik İlkeler ve Yayın Politikası Son Sayı Arşiv Editör Kurulu İletişim
...
Giriş
ISSN 2536-5010 | e-ISSN 2536-5134 | Yayın Aralığı Yılda 2 Sayı | Başlangıç: 2011 | Yayıncı Hibetullah KILIÇ | https://ineseg.org/journals/ejt/home


European Journal of Technique

ISSN 2536-5010 | e-ISSN 2536-5134 | Yayın Aralığı Yılda 2 Sayı | Başlangıç: 2011 | Yayıncı Hibetullah KILIÇ | https://ineseg.org/journals/ejt/home
Kapak Resmi


Cilt 10 - Sayı 1 - 1 Haz 2020
  1. PERFORMANCE STUDY OF FOUR EQUALIZATION TECHNIQUES OVER A WIRELESS COMMUNICATION CHANNEL
    Sayfalar 1 - 12
    Anwr ELASYRİ
  2. MECHANICAL PROPERTIES OF COMPOSITE PLATES AT DIFFERENT CONDITIONS
    Sayfalar 13 - 24
    Gurbet ÖRÇEN , Kadir TURAN , Sedat BİNGÖL
  3. THE EFFECTS OF HIGH DENSITY POLYETHYLENE ADDITION TO LOW DENSITY POLYETHYLENE POLYMER ON MECHANICAL, IMPACT AND PHYSICAL PROPERTIES
    Sayfalar 25 - 37
    Erkin AKDOĞAN
  4. FEASIBILITY OF GOLD BASED HALL DEVICES FOR BIOSENSING PURPOSES
    Sayfalar 38 - 51
    Davut İZCİ
  5. MARBLE CLASSIFICATION USING DEEP NEURAL NETWORKS
    Sayfalar 52 - 63
    Murat CANAYAZ , Fatih ULUDAĞ
  6. A SIMULATION MODEL FOR CUSTOMER FLOW ANALYSIS IN A COMMERCIAL BANK IN NIGERIA
    Sayfalar 64 - 74
    Mayowa Rafiat AJİBOYE
  7. THE EFFECTS OF WELDING PRESSURE AND REINFORCEMENT RATIO ON WELDING STRENGTH IN DIFFUSION-BONDED AlMg3/SiCp COMPOSITES
    Sayfalar 75 - 85
    Nilhan ÜRKMEZ TAŞKIN, Rifat YAKUT , Engin ALP
  8. MIXING OF BIODIESELS PRODUCED FROM DIFFERENT SOURCES TO JET FUELS AND COMPARISON OF SPECIFICATIONS OF FUEL BLENDS
    Sayfalar 86 - 96
    Fevzi YAŞAR
  9. CRASHWORTHINESS INVESTIGATION OF VEHICLE FRONT BUMPER BEAM WITH DIFFERENT CROSS-SECTIONS UNDER AXIAL DYNAMIC LOAD
    Sayfalar 97 - 105
    Serkan ÖZEL , Selçuk KARAGÖZ , Hüseyin BEYTÜT
  10. EFFECT OF WELDING PARAMETERS ON WEAR PERFORMANCE OF BORON COATING MADE WITH PTA
    Sayfalar 106 - 118
    Musa KILIÇ
  11. PERFORMANCE ANALYSIS OF COOLING SYSTEM WITH HORIZONTAL TYPE GROUND SOURCE HEAT PUMP FOR DIYARBAKIR CONDITIONS
    Sayfalar 119 - 130
    Fatih KOÇYİĞİT
  12. OPTIMIZATION OF PROCESS CONDITIONS FOR ADSORPTION OF METHYLENE BLUE ON FORMALDEHYDE-MODIFIED PEANUT SHELLS USING BOX-BEHNKEN EXPERIMENTAL DESIGN AND RESPONSE SURFACE METHODOLOGY
    Sayfalar 131 - 142
    Sinan KUTLUAY , Orhan BAYTAR , Ömer ŞAHİN , Ali ARRAN
  13. THE ROLE OF STATIC VAR COMPENSATOR AT REACTIVE POWER COMPENSATION
    Sayfalar 143 - 152
    Behçet KOCAMAN , Nurettin ABUT
  14. IDENTIFICATION OF PARKINSON’S DISEASE BY AR MODELLING OF GAIT SIGNALS
    Sayfalar 153 - 159
    Ömer AKGÜN , Aydın AKAN
  15. INVESTIGATION OF ROUTE TRACKING PERFORMANCE WITH ADAPTIVE PID CONTROLLER IN QUADROTOR
    Sayfalar 160 - 172
    Ayşegül SUNAY , Aytaç ALTAN , Egemen BELGE , Rifat HACIOĞLU
  16. EFFECT OF WC REINFORCED ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF CUALMN ALLOYS PRODUCED BY HOT PRESSING METHOD
    Sayfalar 173 - 183
    Tayfun ÇETİN , Mehmet AKKAŞ
  17. THOROUGH ANALYSIS OF COMBUSTION AND EMISSIONS OF POWER GENERATOR DIESEL ENGINE AT HIGH IDLING OPERATIONS FUELED WITH LOW PERCENTAGE OF DIFFERENT BIODIESEL BLENDS
    Sayfalar 184 - 195
    Selman AYDIN
  18. A STUDY ON THE EXAMINATION OF THE SINTER METALOGRAPHIC STRUCTURE
    Sayfalar 196 - 206
    Ömer Saltuk BÖLÜKBAŞI
Dizinler