Experimental and ANOVA-Based Statistical Analysis of the Effects of Infill Pattern and Density on the Tensile Properties of FDM-Printed ABS, PETG, and PLA Thermoplastics

Öz

In this study, the effects of material type, infill pattern, and infill density on the tensile strength of ABS, PLA, and PETG specimens manufactured using the Fused Deposition Modeling (FDM) method were investigated. The effects of different infill patterns (linear, triangular, and honeycomb) and infill densities (15%, 30%, and 45%) on the mechanical properties were experimentally examined, and the obtained data were statistically analyzed using analysis of variance (ANOVA). The results indicated that mechanical performance generally increased with increasing infill density. According to the ANOVA results, filament type had a dominant effect on mechanical properties, contributing 83.64% to tensile strength, 54.95% to elongation, and 88.51% to the modulus of elasticity. The infill pattern showed a secondary effect on elongation (18.67%), whereas infill density exhibited secondary effects on tensile strength (8.89%) and modulus of elasticity (6.70%). Furthermore, specific strength and specific modulus values were calculated using the effective densities of the samples to evaluate performance per unit weight. Repeated ANOVA analyses revealed that the effect of infill density on specific tensile strength increased significantly to 28.17%, while no significant effect was observed on the specific modulus.

Anahtar Kelimeler

• Fused deposition modeling
• Additive manufacturing
• Tensile strength
• Modulus of elasticity
• Elongation
• ABS
• PLA
• PETG components
• Analysis of variance

FDM Baskılı ABS, PETG ve PLA Termoplastiklerin Çekme Özellikleri Üzerindeki Dolgu Deseni ve Yoğunluğunun Etkilerinin Deneysel ve ANOVA Tabanlı İstatistiksel Analizi

Öz

Anahtar Kelimeler

• Eriyik yığma ile modelleme
• Katmanlı imalat
• Çekme dayanımı
• Elastisite modülü
• Uzama
• ABS PLA PETG bileşenleri
• Varyans analizi

Kaynakça

1. [1] Q. He, T. Tang, Y. Zeng, N. Iradukunda, B. Bethers, X. Li, & Y. Yang, ‘Review on 3D printing of bioinspired structures for surface/interface applications’, in Advanced Functional Materials, vol. 34, no. 11, 2309323, 2024. doi: 10.1002/adfm.202309323.
2. [2] V. D. Sagias, K. I. Giannakopoulos, and C. Stergiou, ‘Mechanical properties of 3D printed polymer specimens’, in Procedia Structural Integrity, Elsevier B.V., 2018, pp. 85–90. doi: 10.1016/j.prostr.2018.09.013.
3. [3] M. Azadi, A. Dadashi, S. Dezianian, M. Kianifar, S. Torkaman, and M. Chiyani, ‘High-cycle bending fatigue properties of additive-manufactured ABS and PLA polymers fabricated by fused deposition modeling 3D-printing’, Forces in Mechanics, vol. 3, Sep. 2021, doi: 10.1016/j.finmec.2021.100016.
4. [4] R. T. Mushtaq et al., ‘Multi-objective optimization of laser polishing parameters for enhanced mechanical properties, sustainability, and surface finish of 3D-Printed industrial ABS polymers using response surface methodology (RSM)’, Journal of Materials Research and Technology, vol. 29, pp. 3168–3184, Mar. 2024, doi: 10.1016/j.jmrt.2024.02.023.
5. [5] M. Algarni and S. Ghazali, ‘Comparative study of the sensitivity of PLA, ABS, PEEK, and PETG’s mechanical properties to FDM printing process parameters’, Crystals (Basel), vol. 11, no. 8, Aug. 2021, doi: 10.3390/cryst11080995.
6. [6] Y. S. Perera, O. Exley, S. A. V. Dananjaya, N. Hansika, and C. Abeykoon, ‘Investigation of the mechanical properties of 3D printed hollow parts with finite element analysis’, Journal of Materials Research and Technology, vol. 36, pp. 8826–8839, May 2025, doi: 10.1016/j.jmrt.2025.05.104.
7. [7] F. Kartal and A. Kaptan, ‘Prediction and optimization of tensile strength values of 3D printed PLA components with RSM, ANOVA and ANN analysis’, vol. 15, no. 1, p. 2025, doi: 10.36222/ejt.1561857.
8. [8] M. H. Boztepe, ‘A study on the mechanical properties of PLA+ samples manufactured using 3D printing with different raster angles’, Kahramanmaras Sutcu Imam University Journal of Engineering Sciences, vol. 28, no. 2, pp. 923–932, 2025.

9. [9] P. Anerao, A. Kulkarni, Y. Munde, and N. Kharate, ‘A comparative study of machine learning techniques for predicting mechanical properties of fused deposition modelling (FDM)-based 3D-printed wood/PLA biocomposite’, Mechanics of Advanced Composite Structures, vol. 12, no. 2, pp. 261–270, Aug. 2025, doi: 10.22075/macs.2024.33776.1638.
10. [10] K. V. Durga Rajesh, N. Ganesh, S. Yaswanth Kalyan Reddy, H. Mishra, and T. M. V. P. S. Teja Naidu, ‘Experimental research on the mechanical characteristics of fused deposition modelled ABS, PLA and PETG specimens printed in 3D’, Mater Today Proc, Jul. 2023, doi: 10.1016/j.matpr.2023.06.343.
11. [11] N. Vidakis, M. Petousis, E. Velidakis, M. Liebscher, V. Mechtcherine, and L. Tzounis, ‘On the strain rate sensitivity of fused filament fabrication (Fff) processed PLA, ABS, PETG, PA6, and PP thermoplastic polymers’, Polymers (Basel), vol. 12, no. 12, pp. 1–15, Dec. 2020, doi: 10.3390/polym12122924.
12. [12] T. Khan et al., ‘Recent developments in improving the fracture toughness of 3D-printed fiber-reinforced polymer composites’, Aug. 15, 2024, Elsevier Ltd. doi: 10.1016/j.compositesb.2024.111622.
13. [13] M. Ekrem ve M. Yılmaz, ‘Yüksek hızlı 3B yazıcıda basılmış PLA, PETG ve ABS numunelerin mekanik özellikleri’, vol. 7, no. 1, pp. 2667–7989, doi: 10.47112/neufmbd.2024.83.
14. [14] M. Kopar, M. Sömer, and M. B. Çalışkan, ‘Experimental investigation of the effect of raster angle and printing speed on mechanical performance and fracture behavior of ABS material produced by FFF technology’, Fırat Üniversitesi Mühendislik Bilimleri Dergisi, vol. 37, no. 2, pp. 737–746, Sep. 2025, doi: 10.35234/fumbd.1700589.
15. [15] K. Almansoori and S. Pervaiz, ‘Effect of layer height, print speed and cell geometry on mechanical properties of marble PLA based 3D printed parts’, Smart Materials in Manufacturing, vol. 1, Jan. 2023, doi: 10.1016/j.smmf.2023.100023.
16. [16] M. H. Hsueh et al., ‘Effect of printing parameters on the thermal and mechanical properties of 3d-printed pla and petg, using fused deposition modeling’, Polymers (Basel), vol. 13, no. 11, Jun. 2021, doi: 10.3390/polym13111758.
17. [17] M. H. Boztepe (2025). Investigation of Tensile Strength in 3D Printed PLA+ Samples: Influence of Raster Angle and Infill Density. Çukurova Üniversitesi Mühendislik Fakültesi Dergisi, 40(4), 937-948, doi: 10.21605/cukurovaumfd.1652812
18. [18] M. H. Boztepe and M. Haskul (2026). Mechanical Characterization of PLA+ Specimens with Different Geometries Using Experimental and Numerical Methods. Polymers, 18(2), 243, doi: 10.3390/polym18020243
19. [19] Kartal, F., & Kaptan, A. (2025). Prediction and Optimization of Tensile Strength Values of 3D Printed PLA Components with RSM, ANOVA and ANN Analysis. European Journal of Technique (EJT), 15(1), 51-60, doi: 10.36222/ejt.1561857.
20. [20] B. Stecuła, J. Sitko, K. Stecuła, M. Witkowski, and B. Orzeł, ‘Comparison of the strength of popular thermoplastic materials used in 3D printing – PLA, ABS and PET-G’, Combustion Engines, vol. 199, no. 4, pp. 97–103, 2024, doi: 10.19206/CE-189386.
21. [21] R. Mendenhall and B. Eslami, ‘Experimental ınvestigation on effect of temperature on FDM 3D printing polymers: ABS, PETG, and PLA’, Applied Sciences (Switzerland), vol. 13, no. 20, Oct. 2023, doi: 10.3390/app132011503.
22. [22] O. Tunçel, ‘The influence of the raster angle on the dimensional accuracy of FDM-printed PLA, PETG, and ABS tensile specimens’, European Mechanical Science, vol. 8, no. 1, pp. 11–18, Mar. 2024, doi: 10.26701/ems.1392387.
23. [23] H. Gonabadi, S. F. Hosseini, Y. Chen, and S. Bull, ‘Size effects of voids on the mechanical properties of 3D printed parts’, International Journal of Advanced Manufacturing Technology, vol. 132, no. 11–12, pp. 5439–5456, Jun. 2024, doi: 10.1007/s00170-024-13683-9.
24. [24] P. Wang et al., ‘Preparation of short CF/GF reinforced PEEK composite filaments and their comprehensive properties evaluation for FDM-3D printing’, Compos B Eng, vol. 198, Oct. 2020, doi: 10.1016/j.compositesb.2020.108175.
25. [25] B. G. Çakan, ‘Effects of raster angle on tensile and surface roughness properties of various FDM filaments’, Journal of Mechanical Science and Technology, vol. 35, no. 8, pp. 3347–3353, Aug. 2021, doi: 10.1007/s12206-021-0708-8.
26. [26] R. F. Faidallah, M. M. Hanon, V. Vashist, A. Habib, Z. Szakál, and I. Oldal, ‘Effect of different standard geometry shapes on the tensile properties of 3D-printed polymer’, Polymers (Basel), vol. 15, no. 14, Jul. 2023, doi: 10.3390/polym15143029.
27. [27] N. Vinoth Babu et al., ‘Influence of slicing parameters on surface quality and mechanical properties of 3D-printed CF/PLA composites fabricated by FDM technique’, Materials Technology, vol. 37, no. 9, pp. 1008–1025, 2022, doi: 10.1080/10667857.2021.1915056.
28. [28] J. R. C. Dizon, A. H. Espera, Q. Chen, and R. C. Advincula, ‘Mechanical characterization of 3D-printed polymers’, Mar. 01, 2018, Elsevier B.V. doi: 10.1016/j.addma.2017.12.002.
29. [29] I. Khan et al., ‘Parametric investigation and optimisation of mechanical properties of thick tri-material based composite of PLA-PETG-ABS 3D-printed using fused filament fabrication’, Composites Part C: Open Access, vol. 12, Oct. 2023, doi: 10.1016/j.jcomc.2023.100392.
30. [30] T. Galeta, P. Raos, J. Stojšić, and I. Pakši, ‘Influence of structure on mechanical properties of 3D printed objects’, in Procedia Engineering, Elsevier Ltd, 2016, pp. 100–104. doi: 10.1016/j.proeng.2016.06.644.
31. [31] Ö. Çerlek, K. Han, Y. Akin, and Ö. Seçgin, ‘Experimental Investigation of Parameters Affecting the Tensile Strength of Silicone-Filled 3D Printed ABS Products’, J Mater Eng Perform, vol. 34, no. 11, pp. 9627–9636, Jun. 2025, doi: 10.1007/s11665-024-10498-3.
32. [32] H. B. Ali, J. K. Oleiwi, and F. M. Othman, ‘Compressive and tensile properties of ABS Material as a Function of 3D printing process parameters’, Revue des Composites et des Materiaux Avances, vol. 32, no. 3, pp. 117–123, Jun. 2022, doi: 10.18280/rcma.320302.
33. [33] V. Mishra, D. Veeman, and S. Negi, ‘Enhanced tensile strength and fracture toughness of 3D printed PETG/ABS blend for load-bearing application’, J Mater Eng Perform, Nov. 2025, doi: 10.1007/s11665-025-11208-3.
34. [34] J. Loskot et al., ‘Influence of print speed on the microstructure, morphology, and mechanical properties of 3D-printed PETG products’, Polym Test, vol. 123, Jun. 2023, doi: 10.1016/j.polymertesting.2023.108055.
35. [35] A. Özen, B. E. Abali, C. Völlmecke, J. Gerstel, and D. Auhl, ‘Exploring the role of manufacturing parameters on microstructure and mechanical properties in fused deposition modeling (FDM) using PETG’, Applied Composite Materials, vol. 28, no. 6, pp. 1799–1828, Dec. 2021, doi: 10.1007/s10443-021-09940-9.
36. [36] S. Valvez, A. P. Silva, and P. N. B. Reis, ‘Optimization of printing parameters to maximize the mechanical properties of 3D-printed PETG-based parts’, Polymers (Basel), vol. 14, no. 13, Jul. 2022, doi: 10.3390/polym14132564.
37. [37] C. Güdür, T. Türkoğlu, and İ. Eren, ‘Effect of lattice design and process parameters on the properties of PLA, ABS and PETG polymers produced by fused deposition modelling’, Journal of Materials and Mechatronics: A, vol. 4, no. 2, pp. 561–570, Dec. 2023, doi: 10.55546/jmm.1357217.
38. [38] M. T. Sepahi, H. Abusalma, V. Jovanovic, and H. Eisazadeh, ‘Mechanical properties of 3D-printed parts made of polyethylene terephthalate glycol’, J Mater Eng Perform, vol. 30, no. 9, pp. 6851–6861, Sep. 2021, doi: 10.1007/s11665-021-06032-4.
39. [39] H. Gonabadi, & A. Yadav, and S. J. Bull, ‘The effect of processing parameters on the mechanical characteristics of PLA produced by a 3D FFF printer’, doi: 10.1007/s00170-020-06138-4/Published.
40. [40] M. Benamira, N. Benhassine, A. Ayad, and A. Dekhane, ‘Investigation of printing parameters effects on mechanical and failure properties of 3D printed PLA’, Eng Fail Anal, vol. 148, Jun. 2023, doi: 10.1016/j.engfailanal.2023.107218.