OPTIMIZATION OF PROCESS CONDITIONS FOR ADSORPTION OF METHYLENE BLUE ON FORMALDEHYDE-MODIFIED PEANUT SHELLS USING BOX-BEHNKEN EXPERIMENTAL DESIGN AND RESPONSE SURFACE METHODOLOGY
Abstract
This paper presents the use of formaldehyde-modified peanut shells as bioadsorbent for the adsorption of methylene blue for the first time. Firstly, the effect of medium pH, which is one of the important parameters for adsorption process, was determined. Then, the adsorption process conditions such as adsorption time (30-150 min), initial concentration (50-200 ppm) and ambient temperature (25-40°C) were optimized by using response surface methodology (RSM) based on Box-Behnken experimental design. The pseudo-first order and pseudo-second order kinetic models were used to evaluate the adsorption kinetic in this study under optimized process conditions. The maximum adsorption capacity was found under optimum process conditions; 92.25 min adsorption time, 191.87 ppm initial concentration, 39.70°C adsorption temperature. The maximum adsorption capacity for methylene blue was determined to be 43.84 mg/g using RSM based on Box-Behnken experimental design. Adsorption kinetic results showed that the plots of the pseudo-second order kinetic model were fit the experimental data better when compared to the pseudo-first order model. In addition, results indicated that formadehite-modified peanut shells could be used as low cost and effective bioadsorbent for the adsorption of methylene blue, which is one of the important dyes. Furthermore, it was concluded that the RSM based on Box-Behnken experimental design can be applied successfully for the methylene adsorption process.
Keywords
References
- Richardson, S.D., Kimura, S.Y., Water Analysis: Emerging Contaminants and Current Issues, Analytical Chemistry, 88 (2016), pp.546-582.
- Schwarzenbach, R.P., Escher, B.I., Fenner, K., Hofstetter, T.B., Johnson, C.A., Von Gunten, U., Wehrli, B., The Challenge of Micropollutants in Aquatic Systems, Science, 313 (2006), pp.1072-1077.
- Shannon, M.A., Bohn, P.W., Elimelech, M., Georgiadis, J.G., Marinas, B.J., Mayes, A.M., Science and Technology for Water Purification in the Coming Decades, Nature, 452 (2008), pp.301-310.
- Birhanlı, A., Ozmen, M., Evaluation of the Toxicity and Teratogenity of Six Commercial Textile Dyes using the Frog Embryo Teratogenesis Assay–Xenopus, Drug and Chemical Toxicology, 28 (2005) 51-65.
- Jadhav, J., Kalyani, D., Telke, A., Phugare, S., Govindwar, S.P., Evaluation of the Efficacy of a Bacterial Consortium for the Removal of Color, Reduction of Heavy Metals, and Toxicity from Textile Dye Effluent, Bioresource Technology, 101 (2010), pp.165-173.
- Ali, I., New Generation Adsorbents for Water Treatment, Chemical Reviews, 112 (2012), pp.5073-5091.
- Brillas, E., Martínez-Huitle, C.A., Decontamination of Wastewaters Containing Synthetic Organic Dyes by Electrochemical Methods, an Updated Review, Applied Catalysis B: Environmental, 166 (2015), pp.603-643.
- Chong, M.N., Jin, B., Chow, C.W., Saint, C., Recent Developments in Photocatalytic Water Treatment Technology: A Review, Water research, 44 (2010), pp.2997-3027.
Details
Primary Language
English
Subjects
Chemical Engineering
Journal Section
Research Article
Publication Date
June 1, 2020
Submission Date
November 20, 2019
Acceptance Date
May 30, 2020
Published in Issue
Year 2020 Volume: 10 Number: 1
Cited By
Preparation and Physio–Chemical characterisation of activated carbon derived from prosopis juliflora stem for the removal of methylene blue dye and heavy metal containing textile industry effluent
Journal of Cleaner Production
https://doi.org/10.1016/j.jclepro.2023.136579Dynamic adsorption behavior of benzene, toluene, and xylene VOCs in single- and multi-component systems by activated carbon derived from defatted black cumin (Nigella sativa L.) biowaste
Journal of Environmental Chemical Engineering
https://doi.org/10.1016/j.jece.2022.107565Preparation and characterization of activated carbon from hydrochar by hydrothermal carbonization of chickpea stem: an application in methylene blue removal by RSM optimization
International Journal of Phytoremediation
https://doi.org/10.1080/15226514.2021.1926911A comprehensive new study on the removal of Pb (II) from aqueous solution by şırnak coal-derived char
Environmental Technology
https://doi.org/10.1080/09593330.2020.1811397Study of phenobarbital removal from the aqueous solutions employing magnetite-functionalized chitosan
Environmental Science and Pollution Research
https://doi.org/10.1007/s11356-022-23075-9Microwave-exfoliated 2D oligo-layer MoO3-x nanosheets with outstanding molecular adsorptivity and room-temperature gas sensitivity on ppb level
Chemical Engineering Journal
https://doi.org/10.1016/j.cej.2022.140076Insight into the highly efficient adsorption towards cationic methylene blue dye with a superabsorbent polymer modified by esterified starch
Journal of Environmental Chemical Engineering
https://doi.org/10.1016/j.jece.2022.108425Silica gel based new adsorbent having enhanced VOC dynamic adsorption/desorption performance
Colloids and Surfaces A: Physicochemical and Engineering Aspects
https://doi.org/10.1016/j.colsurfa.2020.125848Phosphoric acid-activated bamboo hydrochar for methylene blue adsorption: isotherm and kinetic studies
Biomass Conversion and Biorefinery
https://doi.org/10.1007/s13399-022-03465-2Characteristics optimization of empty fruit bunches chars using central composite design
Biomass Conversion and Biorefinery
https://doi.org/10.1007/s13399-022-02892-5Synthesis of polyamide-based nanocomposites using green-synthesized chromium and copper oxides nanoparticles for the sorption of uranium from aqueous solution
Journal of Environmental Chemical Engineering
https://doi.org/10.1016/j.jece.2021.106755Comparative and competitive adsorption of gaseous toluene, ethylbenzene, and xylene onto natural cellulose-modified Fe3O4 nanoparticles
Journal of Environmental Chemical Engineering
https://doi.org/10.1016/j.jece.2022.107389Sodium alginate-g-poly(sodium acrylate) hydrogel for the adsorption–desorption of ammonium nitrogen from aqueous solution
Journal of Water Process Engineering
https://doi.org/10.1016/j.jwpe.2022.102999Synthesis of alginate-coated magnetic nanocatalyst containing high-performance integrated enzyme for phenol removal
Journal of Environmental Chemical Engineering
https://doi.org/10.1016/j.jece.2020.104884Column optimization of adsorption and evaluation of bed parameters-based on removal of arsenite ion using rice husk
Environmental Science and Pollution Research
https://doi.org/10.1007/s11356-022-20580-9Efficient removal of Cr(VI) from aqueous solution using activated carbon synthesized from silver berry seeds: modeling and optimization using central composite design
Biomass Conversion and Biorefinery
https://doi.org/10.1007/s13399-022-03041-8Fabrication and characterization of 3,4-diaminobenzophenone-functionalized magnetic nanoadsorbent with enhanced VOC adsorption and desorption capacity
Environmental Science and Pollution Research
https://doi.org/10.1007/s11356-020-10885-yCharacterization of Power Ultrasound Modified Kappaphycus alvarezii Biosorbent and its Modeling by Artificial Neural Networks
Water, Air, & Soil Pollution
https://doi.org/10.1007/s11270-022-05690-xSynthesis of magnetic Fe3O4/AC nanoparticles and its application for the removal of gas-phase toluene by adsorption process
International Journal of Chemistry and Technology
https://doi.org/10.32571/ijct.755732Green synthesis of copper oxide and manganese oxide nanoparticles from watermelon seed shell extract for enhanced photocatalytic reduction of methylene blue
International Journal of Phytoremediation
https://doi.org/10.1080/15226514.2022.2109588Adsorption/desorption characteristics of low-concentration semi-volatile organic compounds in vapor phase on activated carbon
Journal of Environmental Management
https://doi.org/10.1016/j.jenvman.2021.114360Activated carbon synthesis and methylene blue adsorption from pepper stem using microwave assisted impregnation method: Isotherm and kinetics
Journal of King Saud University - Science
https://doi.org/10.1016/j.jksus.2023.102559Parametric optimization and prediction of enhanced thermoelectric performance in co-doped CaMnO3 using response surface methodology and neural network
Journal of Materials Science: Materials in Electronics
https://doi.org/10.1007/s10854-023-10954-1Bioeconomic transformation of bio-oil production wastes: a novel adsorbent material for toxic dye adsorption and optimization of process parameters
The Journal of The Textile Institute
https://doi.org/10.1080/00405000.2024.2352677The production of a novel adsorbent from forest waste (Platanus orientalis L.) for dye adsorption: Adsorption process optimization and experimental design
Materials Science and Engineering: B
https://doi.org/10.1016/j.mseb.2024.117366Synthesis of hydrochar from date palm seeds using microwave-enhanced hydrothermal carbonization and its application in dyes removal
International Journal of Phytoremediation
https://doi.org/10.1080/15226514.2024.2377809Abundant porous biochar derived from luffa vine for removal of methylene blue: Selective adsorption and mechanistic studies
Industrial Crops and Products
https://doi.org/10.1016/j.indcrop.2024.119114Adsorption parameters optimization of spent coffee ground biochar for methylene blue removal using response surface methodology
Chemosphere
https://doi.org/10.1016/j.chemosphere.2024.143242An Eco-Friendly Solution to Industrial Dye Pollution: Removal of Methylene Blue by Activated Carbon
Black Sea Journal of Engineering and Science
https://doi.org/10.34248/bsengineering.1680833Integrative chemometric and intelligent modeling approaches for pollutant adsorption: Synergistic insights from experimental design, artificial intelligence (AI), and DFT applied to bisphenol A, β-naphthol, and eriochrome black
Chemometrics and Intelligent Laboratory Systems
https://doi.org/10.1016/j.chemolab.2026.105639
