Magnetoimpedance and Stressimpedance effect at FeSiB Wires

Öz

In this study, the magnetoimpedance (MI) and stress impedance (SI) effect properties of Fe77.5Si7.5B15 wires have been investigated. Wires were annealed at 460 oC for different times. The largest change in the MI was observed at 1MHz ac current frequency value. At this frequency value, the change in MI was about 40% in the wire that as-received, while the change in the wire heat treated at 460 oC for 10 minutes was found to be 169%. It has been determined that low time annealed leads to increase in magnetic softness.

Anahtar Kelimeler

• Amorphous wire
• magnetoimpedance
• stressimpedance
• coercivity.

FeSiB Tellerde Manyetoempedans ve Stresempedans Etki

Öz

Bu çalışmada Fe77.5Si7.5B15 tellerin manyetoempedans (MI) ve stresempedans (SI) etki özellikleri incelenmiştir. Teller 460C de farklı sürelerde ısıtılmıştır. MI değerinde en büyük değişim 1MHz ac akım frekans değerinde gözlenmiştir. Bu frekans değerinde, ısıl işlem görmemiş telde MI değişimi yaklaşık %40 iken 460 C de 10 dakika ısıl işlem görmüş teldeki değişim %169 olarak bulunmuştur. Tellere uygulanan düşük süreli ısıl işlemlerin manyetik yumuşaklıkta artışa yol açtığı belirlenmiştir.

Anahtar Kelimeler

• Amorf tel,
• manyetoempedans,
• stresempedans
• koersivite.

Kaynakça

1. Atalay S. 1992. “Magnetoelastic properties of Iron-based amorphous wires”, PhD Thesis, University of Bath, United Kingdom.
2. Bayri N., Atalay, S. 2004. “Giant stress-impedance effect in Fe71Cr7Si9B13 amorphous wires”, Journal of Alloys and Compounds, 381, 245–249.
3. Beach, R.S., Berkowitz, A.E. 1994 “Giant magnetic field dependent impedance of amorphous FeCoSiB wire”, Applied Physics Letters, 64, 3652-3654.
4. Chiriac H., Ovari, T.A. 2002. “Giant Magnetoimpedance Effect in Soft Magnetic Wire Families”, IEEE Transactions on Magnetics, 38, 3057-3062.
5. Kim, C.G., Kim, J.B., Yoon, S.S., Jang, K.J., C.O. Kim, C.O. 2001 “Temperature dependence of asymmetric GMI Profile”, Journal of Magnetism and Magnetic Materials, 226-230, 700-703.
6. Knobel, M., Sanchez, M.L., Gomez-Polo, C., Marin, P., Vazquez, M., Hernando, A. 1996. ” Giant magneto-impedance effect in nanostructured magnetic wires”, Journal of Appied. Physics, 79, 1646-1654.
7. Knobel, M., Vazquez, M., Sanchez, M.L., A. Hernando,A. 1997. “Effect of tensile stress on the field response of impedance in low magnetostriction amorphous wires”, Journal of Magnetism and Magnetic Materials, 169, 89-97.
8. Knobel, M., Vazquez, M., Kraus, L. 2003. “Handbook of Magnetic Materials”, Elseiver Science B.V., 497-563.

9. Kolat, V.S., Bayri, N., Michalik, S., Izgi, T., F.E. Atalay, Gencer, H., S. Atalay, S. 2000. “Magnetic and magnetoimpedance properties of Mn-doped FINEMET”, Journal of Non- Crystalline Solids, 355, 2562-2566.
10. Mandal, K., Puerta, S., Vazquez M., Hernando,A. 2000. ”The Frequency and Stress Dependence of Giant Magnetoimpedancein Amorphous Microwires” IEEE Transactions on Magnetics, 36, 3257-3259
11. Panina, L.V., Mohri, K. 1994. “Magneto-impedance effect in amorphous wires” Applied Physics Letters, 65, 1189-1191.
12. Pal, S.K., Panda, A.K., Vazquez, M., Mitra, A. 2006. “The effect of magnetoeleastic interaction on the GMI behaviour of Fe-, Co- and Co-Fe-based amorphous wires”, Journal of Materials Processing Technology, 172, 182-187.
13. Phan, M.H., Peng, H.X. 2008. “Giant magnetoimpedance materials: Fundamentals and applications”, Progress in Materials Science, 53, 323-420.
14. Squire, P.T., Atkinson, D., Gibbs MRJ., Atalay S. 1994. “Amorphous wires and their applications”, Journal of Magnetism and Magnetic Materials,132, 10-21.
15. Xiao, S.Q., Liu, Y.H., Yan, S.S., Dai, Y.Y., Zhang, L., Mei, L.M. 2000. “Giant magnetoimpedance and domain structure in FeCuNbSiB films and sandwiched films”, Phyical. Review B, 61, 5734-5739.
16. Vazquez, M. 2001. “Giant magneto-impedance in soft magnetic Wires”, Journal of Magnetism and Magnetic Materials, 226-230 693-699.
17. Zhou, S.X., Jifan Hu, Quan, B.Y. 2001 “Giant magneto-impedance effect in Fe4.5Co67.5Mn0.5Si12B15 amorphous wires”, Materials Science and Engineering A, 304-306, 954-956.