Effects of Magnet Type and Thickness on Outer Rotor Brushless Direct Current Motor Designed by Calculating the Required Motor Power for an Electric Vehicle Prototype

Yıl 2020, Cilt: 13 Sayı: 3, 1025 - 1041, 31.12.2020

Alper Sefa Çağışlar , Sedat İn , Hasan Tiryaki

https://doi.org/10.18185/erzifbed.707837

Cited By: 1

Öz

While electric vehicles are taking their place as today's transportation vehicles, big R&D investments are being made by automobile manufacturers. Outer and inner rotor motors are used for electric vehicles. Considering the fact that the transmission organs make the structure more complex, outer rotor motors come into prominence in applications requiring small power. This study includes the design of outer rotor brushless direct current motor for electric vehicle prototypes. In addition, the effects of magnet type and magnet thickness on the design were analyzed in detail. The effects of magnet type and magnet thickness selected in the design of outer brushless direct current motor can be observed from the results, especially effecting power and torque parameters.

Anahtar Kelimeler

Outer Brushless Direct Current Motor, Design, Magnet Type, Magnet Thickness, Efficiency, Power, Torque

Destekleyen Kurum

Scientific Research Projects Coordination Unit of Istanbul University - Cerrahpasa

Proje Numarası

52033_Production of Brushless DC Motor and Driver with Replaceable Magnetic Field

Teşekkür

This study was funded by the Scientific Research Projects Coordination Unit of Istanbul University - Cerrahpasa. Project number: 52033

Bir Elektrikli Araç Prototipi İçin Gerekli Motor Gücü Hesaplanarak Tasarlanan Dış Rotorlu Fırçasız Doğru Akım Motoruna Mıknatıs Tipinin ve Kalınlığının Etkileri

Öz

Elektrikli araçlar günümüzün ulaşım araçları olarak yerini alırken otomobil üreticileri tarafından bu konuda büyük Ar-Ge yatırımları yapılmaktadır. Bu konuda popülerleşen elektrikli araçlar için dışsal ve içsel rotorlu motorlar kullanılmaktadır. Aktarım organlarının yapıyı daha karmaşıklaştırdığı göz önünde bulundurulduğunda dışsal rotorlu motorlar küçük güç gerektiren uygulamalarda verimlilikleri ile ön plana çıkmaktadır. Bu çalışma prototip elektrikli araçlar için dış rotorlu fırçasız doğru akım motoru tasarımını içermektedir. Ayrıca yapılan analizler ile mıknatıs tipinin ve mıknatıs kalınlığının tasarıma etkileri detaylı olarak incelenmiştir. Elde edilen sonuçlar; kullanılan mıknatıs tipinin ve kalınlığının fırçasız doğru akım motorunun tasarımında dikkat edilmesi gereken verim, güç ve tork parametrelerine etkilerini net olarak gözler önüne sermektedir.

Anahtar Kelimeler

Fırçasız Doğru Akım Motoru, Tasarım, Mıknatıs Tipi, Mıknatıs Kalınlığı, Verim, Güç, Tork

Proje Numarası

52033_Production of Brushless DC Motor and Driver with Replaceable Magnetic Field

Kaynakça

• Cabuk AS, Saglam S, Tosun G, Ustun O. (2016) “Investigation of different slot-pole combinations of an ın-wheel BLDC motor for light electric vehicle propulsion.” International Conference on ELECO’16, Bursa, Turkey.
• Cagislar AS. (2018) “Brushless Direct Current Motor Design for Electric Vehicles.” MSc Thesis, Institute of Graduate Studies In Sciences, Istanbul University, Istanbul, Turkey. (In Turkish)
• Fezzani WE, Amor AB. (2013) “Finite element methods applied to the tubular linear stepping motor.” Journal of Electromagnetic Analysis and Applications, 5(5), 219-222.
• Hanselman D. (2003) “Brushless Permanent Magnet Motor Design.” 9nd ed. Lebanon, Magna Physics Publishing. Jafarboland M, Sargazi MM. (2018) “Analytical modelling of the effect of pole offset on the output parameters of BLDC motor”. IET Electric Power Applications, 12(5), 666-676.
• Kim YS, Kim JY, Kang DW, Lee J. (2016) “Reliability analysis of permanent magnet and air-gap flux density of spoke-type ıpmsm for driving cooling fans”. Indian Journal of Science and Technology, 9(14), 1-6.
• Libert F, Soulard J. (2004) “Investigation on pole-slot combinations for permanent-magnet machines with concentrated windings”. International Conference on Electric Machines (ICEM”04), Cracow, Poland.
• Luo Y, Zhu Y, Yu Y, Zhang L. (2018) “Inductance and force calculations of circular coils with parallel axes shielded by a cuboid of high permeability”. IET Electric Power Applications, 12(5), 717-727.
• Ma C, Li Q, Lu H, Liu Y, Gao H. (2018) “Analytical model for armature reaction of outer rotor brushless permanent magnet DC motor”. IET Electric Power Applications, 12(5), 651-657.
• Maxwell, (2015) “ANSYS Maxwell Electromagnetics Suite 16.0.0”, Reference Manual.
• Mhango LMC. (1989) “Benefits of Nd-Fe-B magnet in brushless DC motor design for aircraft applications”. Fourth International Conference on Electrical Machines and Drives, London, England, 13-15 September.
• Oztura H, Canbaz H. (2003) “Analysis of reduction of torque in no-load conditions in permanent magnet variable air range motors”. 10th Electical – Electronics – Computer Engineering Congress, Istanbul, Turkey, 18-21. (In Turkish)
• Pahlavani MRA, Ayat YS, Vahedi A. (2017) “Minimisation of torque ripple in slotless axial flux BLDC motors in terms of design considerations”. IET Electric Power Applications, 11(6), 1124–1130.
• Prosperi D, Bevan AI, Ugalde G, Tudor CO, Furlan G, Dove SK, Lucia P, Zakotnik M. (2018) “Performance comparison of motors fitted with magnet-tomagnet recycled or conventionally manufactured sintered NdFeB”. Journal of Magnetism and Magnetic Materials, 460(2018), 448-453.
• Shen S, Tsoi M, Prosperi D, Tudor CO, Dove SK, Bevan AI, Furlan G, Zakotnik M. (2017) “A comparative study of magnetoresistance and magnetic structure in recycled vs. virgin NdFeB-type sintered magnets”. Journal of Magnetism and Magnetic Materials, 422(2017), 158-162.
• Staszak J. (2013) “Determination of slot leakage inductance for three-phase induction motor winding using an analytical method”. Archives of Electrical Engineering, 62(4), 569-591.
• Tiryaki H, Akgündoğdu A, Erdoğan G, Karadeniz O, Şahin U, Yılmaz MY, Durak Y, Kocaarslan I. (2017) “Implementation of an electromobile for efficiency challenge”. World Electro Mobility Conference (WELMO’17), Izmir, Turkey. (In Turkish)
• Tiryaki H, Cagislar AS, Akgundogdu A, Kocaarslan I. (2016) “Commutable magnetic field on brushless direct current motor for electrical vehicle”. International Journal of Engineering Research and Development, 8(2), 37-45. (In Turkish)
• Vidhya B, Srinivas KN. (2017) “Effect of stator permanent magnet thickness and rotor geometry modifications on the minimization of cogging torque of a flux reversal machine”. Turkish Journal of Electrical Engineering & Computer Sciences, 25(2017), 4907-4922.
• Yedemale P. (2003) “Brushless DC (BLDC) Motor Fundamentals”. Microchip Technology Inc., USA, App. Note: DS00885A.
• Ziegenbein J. (2011) “Magnetic Clamping Structures for The Consolidation of Composite Laminates”. PhD Thesis (PhD), Georgia Institute of Technology, North Ave NW/Atlanta, USA.