Modeling the limiting performance of resistive superconductor fault current limiters for 2G HTS tape

Öz

Fault currents in power systems force valuable power system elements thermally, electro-dynamically and electromagnetically. Due to the increase in fault current levels, the installation of components resistant to fault currents and the damage of these currents to existing components bring economic problems. Therefore, various modern limiting methods have been developed in recent years. One of these methods, Resistive Superconducting Fault Current Limiter (R-SFCL), increases the security and sustainability of the system by eliminating these risks. This study made a dynamic model in MATLAB/Simulink by creating a sample R-SFCL in the laboratory using a 2G HTS (High-Temperature Superconductor) tape. With this model, the limitation analysis for single phase-ground fault is observed. The simulation results and the responses of the sample R-SFCL were compared and it was concluded that they showed a great deal of similarity.

Anahtar Kelimeler

• 2G HTS tape
• Fault current limiting
• Resistive SFCL
• Simulation
• Design

Destekleyen Kurum

Firat University Scientific Research Foundation

Proje Numarası

MF.20.02

Teşekkür

This study was supported by Firat University Scientific Research Foundation (Project Numbers MF.20.02).

Kaynakça

1. [1] Seyedi H, Tabei B. “Appropriate placement of fault current limiting reactors in different hv substation arrangements”. Circuits Syst., 03, 03, 252–262, 2012.
2. [2] Kempski A, Rusinski J, Hajdasz S. “Analysis of Recovery Time of HTS tapes with electrical insulation layers for superconducting fault current limiters under load conditions”. IEEE Trans. Appl. Supercond., 29, 8, 2019.
3. [3] Blair SM, Booth CD, Burt GM. “Current-time characteristics of resistive superconducting fault current limiters”. IEEE Trans. Appl. Supercond., 22, 2, 2012.
4. [4] M. C. Nagarathna V. M. H. and and S. R., “A Review on Super Conducting Fault Current Limiter ( SFCL ) in power system,” 3, 2, 485–489, 2015.
5. [5] Zhang X, Ruiz HS, Zhong Z, Coombs TA. “Implementation of resistive type superconducting fault current limiters in electrical grids : performance analysis and measuring of optimal locations”. Superconductivity,4,1-6, 2015.
6. [6] Gorbunova DA, Kumarov DR, Scherbakov VI, Sim K, Hwang S. “Influence of polymer coating on SFCL recovery under load”. Prog. Supercond. Cryog., 12, 1, 44–47, 2020.
7. [7] Zhu J, Zhao Y, Chen P, Gong J, Jiang S, Wang S. “Performance analysis on a flux coupling superconducting fault current limiter ( SFCL ) considering the power grid integration based on MATLAB / SIMULINK”. 2018 IEEE Int. Conf. Appl. Supercond. Electromagn. Devices, 3, 1–2, 2018.
8. [8] Ignatius OK. “Transient stability improvement using resistive-type superconducting fault current limiters (R-SFCL)”. Int. J. Eng. Technol. Sci., 6, 2, 28–41, 2019.

9. [9] Zenitani Y, Akimitsu J. “Discovery of the new superconductor MgB2 and its recent development”. Oyobuturi, 71, 1, 17–22, 20027.
10. [10] Kim JS, Lim SH, Kim JC. “Study on application method of superconducting fault current limiter for protection coordination of protective devices in a power distribution system”. IEEE Trans. Appl. Supercond., 22, 3, 4–7, 2012.
11. [11] Kulkarni S, Dixit M, Pal K. “Study on recovery performance of high T c superconducting tapes for resistive type superconducting fault current limiter applications”. 36, 1231–1235, 2012.
12. [12] Zampa A, Holleis S, Badel A, Tixador P, Bernardi J, Eisterer M. “Influence of local inhomogeneities in the REBCO layer on the mechanism of quench onset in 2G HTS Tapes”. IEEE Trans. Appl. Supercond., 32, 3, 2022.
13. [13] Moyzykh M. et al. “First Russian 220 kV superconducting fault current limiter for application in city grid”. IEEE Trans. Appl. Supercond., 31, 5, 1–7, 2021.
14. [14] Hatata AY, Ebeid AS, El-Saadawi MM. “Application of resistive super conductor fault current limiter for protection of grid-connected DGs”. Alexandria Eng. J., 57, 4, 4229–4241, 2018.
15. [15] De Sousa WTB, Polasek A, Dias R, Matt CFT, De Andrade R. “Thermal-electrical analogy for simulations of superconducting fault current limiters”. Cryogenics (Guildf), 62, 97–109, 2014.
16. [16] Chen Y, Li S, Sheng J, Jin Z, Hong Z, Gu J. “Experimental and numerical study of co-ordination of resistive-type superconductor fault current limiter and relay protection”. J. Supercond. Nov. Magn., 26, 11, 3225–3230, 2013.
17. [17] Blair S.M, Booth CD, Burt GM. “Current-time characteristics of resistive superconducting fault current limiters”. IEEE Trans. Appl. Supercond., 22, 2, 5600205, 2012.
18. [18] Nemdili S, Belkhiat S. “Modeling and simulation of resistive superconducting fault-current limiters”. J. Supercond. Nov. Magn., 25, 7, 2351–2356, 2012.
19. [19] Dutta S, Babu BC. “Modelling and analysis of resistive Superconducting Fault Current Limiter”. IEEE TechSym 2014 - 2014 IEEE Students’ Technol. Symp., 362–366, 2014.
20. [20] Liang H, Chen Y, Duan R, Lu Y, Sheng J. “Numerical Study on the on-grid performance of superconducting cable cooperated with R-SFCL”. IEEE Trans. Appl. Supercond., 32, 4, 2022.
21. [21] Qian K, Guo Z, Terao Y, Ohsaki H. “Electromagnetic and thermal design of superconducting fault current limiters for DC electric systems using superconducting”. 2017.
22. [22] Manohar P, Ahmed W. “Superconducting fault current limiter to mitigate the effect of DC line fault in VSC-HVDC system”. 2012 Int. Conf. Power, Signals, Control. Comput., 1–6, 2012.
23. [23] Xue S, Gao F, Sun W, Li B. “Protection principle for a DC distribution system with a resistive superconductive fault current limiter”. Energies, 8, 6, 4839–4852, 2015.
24. [24] Elmitwally A. “Proposed hybrid superconducting fault current limiter for distribution systems”. Int. J. Electr. Power Energy Syst., 31, 10, 619–625, 2009.
25. [25] Langston J, Steurer M, Woodruff S, Baldwi T, Tang J. “A generic real-time computer simulation model for superconducting fault current limiters and its application in system protection studies”. IEEE Trans. Appl. Supercond., 15, 2 PART II, 2090–2093, 2005.
26. [26] Zhu J, Chen S, Jin Z. “Progress on second-generation high-temperature superconductor tape targeting resistive fault current limiter application”. Electron., 11, 3, 2022.
27. [27] Escamez G, Vialle J, Bruzek CE, Grose V, Bauer M, Tixador P. “Numerical investigations of ReBCO conductors with high limitation electric field for HVDC SFCL”. IEEE Trans. Appl. Supercond., 28, 4, 2018.
28. [28] Badel A, Escamez G, Tixador P. “REBCO FCL modelling: Influence of local critical current non-uniformities on overall behavior for various tape architectures”. IEEE Trans. Appl. Supercond., 25, 3, 13–16, 2015.