Production and characterization of chitosan-based polymer particles with the precipitation collection method

Hülya Demırtaş; Şeyda Taşar; Fatih Kaya; Ahmet Özer

Production and characterization of chitosan-based polymer particles with the precipitation collection method

Öz

In this study, a chitosan-based polymer particle was produced to be used as a sorbent. Gel particle production was carried out using chitosan samples with different acetylation degrees and molecular weights. The produced particles were characterized. In the first phase of the study, chitosan samples were provided and structural analyses were performed. In the second stage, polymer particle production was carried out by the precipitation-collection method. The morphological, structural, and physicochemical properties of the produced gel particles were examined. In the last step, the sorption efficiency of the particles (distilled water, oleic acid) was investigated. As a result, it was measured that the polymer particle diameters were to be between 3.388 and 3.903 mm and the densities of the particles were to be 0.389-0.416 g/cm3. Distilled water holding capacity of the particle which was produced with an 85 % DDA chitosan sample, was calculated as 0.523 g/gparticles, and the oleic acid holding capacity was determined as 0.286 g/gparticles. These values are approximately 20 % lower than the values obtained with the 75 % DDA chitosan sample. Low molecular mass chitosan sample sorbed 0.556 g distilled water per gram particle and 0.193 g oleic acid per gram particle. These values were calculated as 0.170 g/gparticle and 0.381 g/gparticle for the particles produced using high molecular weight chitosan samples, respectively. EDX analysis performed on the selected region, it was determined that the chitosan-based polymer particle consisted of 43.58 % C, and 49.83 % O.

Anahtar Kelimeler

Kaynakça

[1] Sharma S, Sudhakara P, Singh J, Ilyas RA, Asyraf MRM, Razman MR. “Critical review of biodegradable and bioactive polymer composites for bone tissue engineering and drug delivery applications”. Polymers, 13(16), 2623, 2021.
[2] Fernandez-Kim SO. Physicochemical and Functional Properties of Crawfish Chitosan as Affected by Different Processing Protocols. MS dissertation, Louisiana State University, Baton Rouge, L.A., 2004.
[3] Tajik H, Moradi M, Rohani SMR, Erfani AM, Jalali FSS. “Preparation of chitosan from brine shrimp (artemia urmiana) cyst shells and effects of different chemical processing sequences on the physicochemical and functional properties of the product”. Molecules, 13, 1263-1274, 2008.
[4] Peker İ, Oktar F, Eroğlu M, Morkoç E. “Kerevit kabuklarından kitosan üretilmesi ve kesilmiş sütün suyundan laktoz izolasyonu işleminde kullanılması”. Tübitak MAG Project, Project number: 104M017, 88, 2006.
[5] Rinaudo, M. “Chitin and chitosan: properties and applications”. Progress in Polymer Science, 31, 603-632, 2006.
[6] Nemtsev SV, Gamzazade AI, Rogozhin SV, Bykova VM, Bykov VP. “Deacetylation of chitin under homogeneous conditions”. Applied Biochemistry and Microbiology, 38 (6), 521–526, 2002.
[7] Paulino AT, Simionato JI, Garcia JC, Nozaki J. “Characterization of chitosan and chitin produced from silkworm crysalides”. Carbohydrate Polymers, 64, 98-103, 2006.
[8] Hajji S, Younes I, Ghorbel-Bellaaj O, Hajji R, Rinaudo M, Nasri M, Jellouli K. “Structural differences between chitin and chitosan extracted from three different marine sources”. International Journal of Biological Macromolecules, 65, 298-306, 2014.

[9] Kaur S, Dhillon GS. “The versatile biopolymer chitosan: potential sources, evaluation of extraction methods and applications”. Critical Reviews in Microbiology, 40, 155-175, 2014.
[10] Kurita K. “Chitin and chitosan: Functional biopolymers from marine crustaceans”. Marine Biotechnology, 8, 203-226, 2006.
[11] GlycoPedia. “Extraction of Chitin & Preparation of Chitosan” https://www.glycopedia.eu/e-chapters/from-chitin-to-chitosan/article/extraction-of-chitin-preparation-of-chitosan (21.01.2022).
[12] Du J, Tan E, Kim HJ, Zhang A, Bhattacharya R, Yarema KJ, “Comparative evaluation of chitosan, cellulose acetate, and polyethersulfonenanofiber scaffolds for neural differentiation”. Carbohydrate Polymers, 99,483-490, 2014.
[13] Salah R, Michaud P, Mati F, Harrat Z, Lounici H, Abdi N, Drouiche N, Mameri N. “Anticancer activity of chemically prepared shrimp low molecular weight chitin evaluation with the human monocyte leukaemia cell line”. THP-1. International Journal of Biological Macromolecules, 52, 333-339, 2013.
[14] El-Aidie SAM. “A review on chitosan: ecofriendly multiple potential applications in the food industry “. Int J Adv Life Sci Res., 1 (1), 1-14, 2018.
[15] Youssef AM, Abou-Yousef H, El-Sayed SM, Kamel S. “Mechanical and antibacterial properties of novel high-performance chitosan / nanocomposite films”. International Journal of Biological Macromolecules, 76, 25-32, 2015.
[16] Montazer M, Afjeh G, “Simultaneous x-linking and antimicrobial finishing of cotton fabric”. Journal of Applied Polymer Science, 103,178-185, 2007.
[17] Demir A, Seventekin N. “Chitin, chitosan and general uses”. Textile Technologies Electronic Journal , 92-103, 2009.
[18] Koçer İ. Chitosan is Obtained by Various Methods and Characterization , M.Sc., Hacettepe University, Institute of Science and Technology in Ankara, Turkey, 2015.
[19] Tokatlı K. Shrimp Optimization of Production Conditions of Chitosan and Chitosan from Waste Edible Films Obtained Effects of Shelf Life Cherry Veneer, Gaziosmanpasa University, Science Institutes bases in Tokat, Turkey, 2016.
[20] Çarıkçı TD. Shellfish Ultrasonic Reactor Waste Chitosan Production/Production of chitosan from shellfish waste in an ultrasonic reactor, Bilecik Sheikh Edebali University, Institute of Science, Istanbul, Turkey, 2015.
[21] Boamah PO, Huang Y, Zhang Q, Wu J. “Sorption of heavy metal ions onto carboxylate chi tosan derivatives-a mini-review”. Ecotoxicol. Environ., 116, 113–120, 2015.
[22] Demarchi C, Debrassi A, Dluz ewski P, Scapinello J. “Adsorption of the dye remazol red 198 (rr198) by o-carboxymethylchitosan-N-lauryl /Fe2O3 magnetic nanoparticles”. Arabian Journal of Chem., 12 (8), 3444-3453, 2015.
[23] Kyzas GZ Kostoglou M, Lazaridis NK. “Relating interactions of dye molecules with chitosan to adsorption kinetic data”. Langmuir Article, 26, 9617-9626, 2010.
[24] Soltani RDC, Khataee AR, Safari M, Joo SW. “Preparation of bio-silica/chitosan nanocomposite for adsorption of a textile dye in aqueous solutions”. International Biodeterioration & Biodegradation, 85, 383-391, 2013.
[25] Boamah PO, Huang Y, Zhang Q, Wu J. “Sorption of heavy metal ions onto carboxylate chitosan derivatives-a mini-review”. Ecotoxicology and Environmental Safety, 116: 113–120, 2015.
[26] Bozorgpour F, Ramandi HF, Jafari P, Samadi S, Yazd SS, Aliabadi M. “Removal of nitrate and phosphate using chitosan/Al2O3/Fe3O4 composite nanofbrous adsorbent: Comparison with chitosan/Al2O3/Fe3O4 beads”. Int J Biol Macromol, 93, 557–565, 2016.
[27] Chethan PD, Vishalakshi B. “Synthesis of ethylenediamine modifed chitosan microspheres for removal of divalent and hexavalent ions”. Int J Biol Macromol, 75:179–185, 2015.
[28] Demarchi C, Debrassi A, Dluz ewski P, Scapinello J. “Adsorption of the dye remazol red 198 (rr198) by o-carboxymethylchitosan-N-lauryl / Fe2O3 magnetic nanomicroparticles”. Arabian Journal of Chemistry, 12 (8), 3444-3453, 2015.
[29] Filipkowska U, Jóźwiak T. “Application of chemically-cross-linked chitosan for the removal of reactive black 5 and reactive yellow 84 dyes from aqueous solutions”. Journal of Polymer Engineering, 33, 8, 735-747, 2013.
[30] Fawzya YN, Rahmawati A, Patantis G, “Physicochemical properties of chitooligosaccharide prepared by using chitosanase from Stenotrophomonas maltophilia KPU 2123”. Journal of Earth and Environmental Sciences, 139 012045, 2018.
[31] Yuan Y, Chesnutt BM, Haggard WO, Bumgardner JD. “Deacetylation of chitosan: Material characterization and in vitro evaluation via albumin adsorption and Pre-osteoblastic cell cultures”. Materials, 4, 1399-1416, 2011.
[32] Ogawa K, Yui T. “Structure and function of chitosan. 3. Crystallinity of partially N-acetylated chitosans”. Biosci. Biotech. Bioch., 57, 1466-1469, 1993.
[33] Zhang Z.T, Chen DH, Chen L. “Preparation of two different serials of chitosan”. J. Dong Hua Univ. (Eng. Ed.) 19, 36-39, 2002.
[34] Knaul JZ, Kasaai MR, Bui VT, Creber KAM. “Characterization of deacetylated chitosan and chitosan molecular weight review”. Can. J. Chem., 76, 1699-1706, 1998.
[35] Xu Y, Du Y. “Effect of molecular structure of chitosan on protein delivery properties of chitosan nanoparticles”. Int. J. Pharm, 250, 215-226, 2003.
[36] Zhang H, Neau SH. “In vitro degradation of chitosan by a commercial enzyme preparation: effect of molecular weight and degree of deacetylation”. Biomaterials, 22, 1653-1658, 2001.
[37] Nunthanid J, Puttipipatkhachorn S, Yamamoto K, Peck G.E. “Physical properties and molecular behavior of chitosan films”. Drug Dev. Ind. Pharm, 27, 143-157, 2001.
[38] Shijie (Gabriel) K, Linda M, Michael P, Mucalo R. “Chitosan: A review of sources and preparation methods”. International Journal of Biological Macromolecules, 169, 85—94, 2021.
[39] Younes I, Rinaudo M. “Chitin and chitosan preparation from marine sources, Structure, properties and applications”. Marine Drugs, 13 (3), 1133—1174, 2015.
[40] Mitra T, Sailakshmi G, Gnanamani A, Mandal AB. “Studies on cross-linking of succinic acid with chitosan/collagen”. Mater. Res., 16, 755-765, 2013.
[41] Anirudhan TS, Rijith S, “Glutaraldehyde cross-linked epoxyaminated chitosan as an adsorbent for the removal and recovery of copper (II) from aqueous media”. Colloids Surf. A Physicochem. Eng. Asp., 351, 52—59, 2009.
[42] Sowmya A, Meenakshi S. “A novel quaternized chitosan – melamine – glutaraldehyde resin for the removal of nitrate and phosphate anions”. Int. J. Biol. Macromol, 64, 224-232, 2014.

Ayrıntılar

Birincil Dil

İngilizce

Konular

Kimya Mühendisliği

Bölüm

Araştırma Makalesi

Yazarlar

Hülya Demırtaş Bu kişi benim
0000-0003-1913-1433
Türkiye

Şeyda Taşar ^* Bu kişi benim
0000-0003-3184-1542
Türkiye

Fatih Kaya Bu kişi benim
0000-0002-4063-8362
Türkiye

Ahmet Özer Bu kişi benim
0000-0002-8075-3672
Türkiye

Yayımlanma Tarihi

8 Haziran 2022

Gönderilme Tarihi

21 Ocak 2022

Kabul Tarihi

9 Mayıs 2022

Yayımlandığı Sayı

Yıl 2022 Cilt: 1 Sayı: 2

IZ

https://izlik.org/JA62GG22MY

Kaynak Göster

RIS / Bibtex

APA

Demırtaş, H., Taşar, Ş., Kaya, F., & Özer, A. (2022). Production and characterization of chitosan-based polymer particles with the precipitation collection method. Firat University Journal of Experimental and Computational Engineering, 1(2), 68-79. https://izlik.org/JA62GG22MY

AMA

1.Demırtaş H, Taşar Ş, Kaya F, Özer A. Production and characterization of chitosan-based polymer particles with the precipitation collection method. Firat University Journal of Experimental and Computational Engineering. 2022;1(2):68-79. https://izlik.org/JA62GG22MY

Chicago

Demırtaş, Hülya, Şeyda Taşar, Fatih Kaya, ve Ahmet Özer. 2022. “Production and characterization of chitosan-based polymer particles with the precipitation collection method”. Firat University Journal of Experimental and Computational Engineering 1 (2): 68-79. https://izlik.org/JA62GG22MY.

EndNote

Demırtaş H, Taşar Ş, Kaya F, Özer A (01 Haziran 2022) Production and characterization of chitosan-based polymer particles with the precipitation collection method. Firat University Journal of Experimental and Computational Engineering 1 2 68–79.

IEEE

[1]H. Demırtaş, Ş. Taşar, F. Kaya, ve A. Özer, “Production and characterization of chitosan-based polymer particles with the precipitation collection method”, Firat University Journal of Experimental and Computational Engineering, c. 1, sy 2, ss. 68–79, Haz. 2022, [çevrimiçi]. Erişim adresi: https://izlik.org/JA62GG22MY

ISNAD

Demırtaş, Hülya - Taşar, Şeyda - Kaya, Fatih - Özer, Ahmet. “Production and characterization of chitosan-based polymer particles with the precipitation collection method”. Firat University Journal of Experimental and Computational Engineering 1/2 (01 Haziran 2022): 68-79. https://izlik.org/JA62GG22MY.

JAMA

1.Demırtaş H, Taşar Ş, Kaya F, Özer A. Production and characterization of chitosan-based polymer particles with the precipitation collection method. Firat University Journal of Experimental and Computational Engineering. 2022;1:68–79.

MLA

Demırtaş, Hülya, vd. “Production and characterization of chitosan-based polymer particles with the precipitation collection method”. Firat University Journal of Experimental and Computational Engineering, c. 1, sy 2, Haziran 2022, ss. 68-79, https://izlik.org/JA62GG22MY.

Vancouver

1.Hülya Demırtaş, Şeyda Taşar, Fatih Kaya, Ahmet Özer. Production and characterization of chitosan-based polymer particles with the precipitation collection method. Firat University Journal of Experimental and Computational Engineering [Internet]. 01 Haziran 2022;1(2):68-79. Erişim adresi: https://izlik.org/JA62GG22MY