Characterization of polyurethane produced by polyol synthesized from corn oil

Yıl 2022, Cilt: 1 Sayı: 2, 60 - 67, 08.06.2022

Ercan Aydoğmuş Fethi Kamışlı

Öz

In this study, biopolyol has been synthesized from corn oil by epoxidation, hydroxylation, neutralization, and purification processes. The rheological properties of both corn oil and polyol obtained from corn oil have been compared. When the variation of viscosity with temperature is examined, it is seen that corn oil-based polyol is more viscous than corn oil. Accordingly, it is thought that the molecular structure of the biopolyol changes, and its molecular weight increases. According to the results obtained, the hydroxyl number of the synthesized polyol is determined as approximately 160 mg KOH/g polyol by the analytical method. The produced polyols have been prepared for polyurethane production after being characterized physically and chemically. The production of polyurethane sponge with a suitable process and method has been realized according to the purpose of use. The approximate density of the produced polyurethane was 40 kg/m3 and the thermal conductivity coefficient was found to be 0.026 W/m·K. Also, Taguchi method has been used in experimental studies to determine an efficient and economical process in both the polyol synthesis and the polyurethane production.

Anahtar Kelimeler

Corn oil, Polyol, Polyurethane, Rheology, Characterization

Destekleyen Kurum

The Scientific and Technological Research Council of Turkey

Proje Numarası

2170159

Teşekkür

This work was supported by 1512 TÜBİTAK (Project No: 2170159), and Fırat University Scientific Research Foundation (FÜBAP: MF.16.53).

Kaynakça

• [1] Michel FS, Chazeau L, Cavaillé JY. "Mechanical properties of high density polyurethane foams: II effect of the filler size". Composites Science and Technology, 66, 2709-2718, 2006.
• [2] Liu K, Liang W, Ren F, Ren J, Wang F, Ding H. "The study on compressive mechanical properties of rigid polyurethane grout materials with different densities". Construction and Building Materials, 206, 270-278, 2019.
• [3] Guo A, Cho Y, Petrović ZS. "Structure and properties of halogenated and nonhalogenated soy-based polyols". Journal of Polymer Science, Polymer Chemistry Edition, 38, 21-39, 2000.
• [4] Mosiewicki MA, Dell’Arciprete GA, Aranguren MI, Marcovich NE. "Polyurethane foams obtained from castor oil-based polyol and filled with wood flour". Journal of Composite Materials, 43, 3057-3072, 2009.
• [5] Aydoğmuş E, Kamışlı F. "Characterization of polyurethane produced by vegetable oil based polyols". Academic Works in the Fields of Science, Culture and Art, Gece Kitaplığı, 1, 51-55, 2018.
• [6] Aydoğmuş E, Kamışlı F. "Modeling of rheological behavior of vegetable oils and vegetable oil-based polyols". Academic Works in the Fields of Science, Culture and Art, Gece Kitaplığı, 1, 57-65, 2018.
• [7] Aydoğmuş E, Gür M, Kamışlı F. "The Production of Vegetable Oil-Based Polyols and Modelling of Rheological Properties". Journal of the Turkish Chemical Society Section B: Chemical Engineering, 1, 33-42, 2017.
• [8] Aydoğmuş E, Kamışlı F. "The production of polyurethane from waste vegetable oil-based polyols and modelling of rheological properties". Periodicals of Engineering and Natural Sciences, 5, 81-86, 2017.
• [9] Kamışlı F, Aydoğmuş E. "Generating of new types of fractal structures and developing of formula for the effective thermal conductivity of fractal porous media". International Journal of Modern Communication Technologies and Research, 4:1-8, 2016.
• [10] Aydoğmuş E. Synthesis of Polyols from Vegetable Oils and Characterization of the Produced Polyurethanes. Ph.D Thesis, Fırat University, Institute of Science, Elazığ, Turkey, 2019.
• [11] Aydoğmuş E, Kamışlı F. "New commercial polyurethane synthesized with biopolyol obtained from canola oil: Optimization, characterization, and thermophysical properties". Journal of Molecular Structure, 1256, 132495, 2022.