Surface pretreatments used for improving the zirconia-resin cement bonding

Yıl 2013, Cilt: 30 Sayı: 3, 162 - 8, 11.10.2013

Neşet Volkan Asar Merve Çakırbay

Öz

Full ceramic zirconia crowns and bridges are preferred by dentists and patients because of their superior esthetic and mechanical properties. Zirconia is a biocompatible material that provides natural-like tooth appearance. Resin cements are generally preferred in cementation of zirconia restorations. Bonding of zirconia-based ceramics to resin cements cannot be achieved with the same methods used for traditional glass porcelain because zirconia is a silica-free, acid-resistant and polycrystalline ceramic. In recent years, the bonding between zirconia and luting agent has been of great concern among researchers. Many methods have been developed and reported in the literature for providing enhanced adhesion. The purpose of this review was to give comprehensive knowledge about the surface pretreatments used for improving zirconia-resin cement bonding.

Anahtar Kelimeler

Bond Strength, Lasers, Resin Cement, Silanes, Surface Properties, Zirconia

Zirkonya-rezin siman bağlantısını güçlendirmede kullanılan yüzey işlemleri

Öz

Zirkonya tam seramik kron ve köprüler, diş hekimleri ve hastalar tarafından üstün estetik ve mekanik özellikleri nedeniyle tercih edilmektedir. Zirkonya doğal diş benzeri görüntü sağlayan biyouyumlu bir materyaldir. Zirkonya restorasyonların dişe yapıştırılmasında genellikle rezin simanlar tercih edilmektedir. Zirkonya içerikli seramiklerin rezin simanla bağlantısı geleneksel cam seramiklerde kullanılan yöntemlerle sağlanamamaktadır. Çünkü zirkonya, silikadan yoksun, aside karşı dirençli ve polikristalin yapıda bir seramiktir. Son yıllarda, zirkonya ile yapıştırıcı ajanlar arasındaki bağlantı araştırmacıların çok önem verdikleri bir konu olmuştur. Bağlantıyı arttırmak için çok sayıda yöntem geliştirilmiş ve literatürde rapor edilmiştir. Bu derlemenin amacı, zirkonya-rezin siman bağlantısını güçlendirmede kullanılan yüzey işlemleri hakkında kapsamlı bilgi sunmaktır.

Anahtar Kelimeler

Bağlanma Dayanımı, Lazerler, Rezin Siman, Silanlar, Yüzey Özellikleri, Zirkonya

Kaynakça

• Blatz MB, Sadan A, Kern M. Bonding to silica based ceramics: clinical and laboratory guidelines. Quintess Dent Technol 2002;25:54-62.
• Smith RL, Villanueva C, Rothrock JK, Garcia-Godoy CE, Stoner BR, Piascik JR, et al. Long-term microtensile bond strength of surface modified
• zirconia. Dent Mater 2011;27:779-85.
• Akgungor G, Sen D, Aydin M. Influence of different surface treatments on the short-term bond strength and durability between a zirconia post and a composite resin core material. J Prosthet Dent 2008;99:388-99.
• Kern M, Wegner SM. Bonding to zirconia ceramic: adhesion methods and their durability. Dent Mater 1998;14:64-71.
• Amaral R, Ozcan M, Bottino MA, Valandro LF. Microtensile bond strength of a resin cement to glass infiltrated zirconia-reinforced ceramic: the effect of surface conditioning. Dent Mater 2006;22:283-90.
• Blatz MB, Sadan A, Martin J, Lang B. In vitro evaluation of shear bond strengths of resin to densely-sintered high-purity zirconium-oxide ceramic after long-term storage and thermal cycling. J Prosthet Dent 2004;91:356-62.
• Borges GA, Sophr AM, de Goes MF, Sobrinho LC, Chan DC. Effect of etching and airborne particle abrasion on the microstructure of different dental ceramics. J Prosthet Dent 2003;89:479-88.
• de Oyagüe RC, Monticelli F, Toledano M, Osorio E, Ferrari M, Osorio R. Influence of surface treatments and resin cement selection on bonding to densely-sintered zirconium-oxide ceramic. Dent Mater 2009;25:172-9.
• Phark JH, Duarte S Jr, Blatz M, Sadan A. An in vitro evaluation of the long-term resin bond to a new densely sintered high-purity zirconiumoxide ceramic surface. J Prosthet Dent 2009;101:29-38.
• Yun JY, Ha SR, Lee JB, Kim SH. Effect of sandblasting and various metal primers on the shear bond strength of resin cement to Y-TZP ceramic. Dent Mater 2010;26:650-8.
• Komine F, Fushiki R, Koizuka M, Taguchi K, Kamio S, Matsumura H. Effect of surface treatment on bond strength between an indirect composite material and a zirconia framework. J Oral Sci 2012;54: 39-46.
• Sato H, Yamada K, Pezzotti G, Nawa M, Ban S. Mechanical properties of dental zirconia ceramics changed with sandblasting and heat treatment. Dent Mater J 2008;27:408-14.
• Dérand P, Dérand T. Bond strength of luting cements to zirconium oxide ceramics. Int J Prosthodont 2000;13:131-5.
• Thompson JY, Stoner BR, Piascik JR, Smith R. Adhesion/cementation to zirconia and other non-silicate ceramics: where are we now? Dent Mater 2011;27:71-82.
• Uludamar A, Akalın B. Zirkonyum esaslı tam seramik restorasyonlarda simantasyon öncesi yüzey hazırlıkları. Cumhuriyet Dent J 2011;14:140-53.
• Della Bona A, Borba M, Benetti P, Cecchetti D. Effect of surface treatments on the bond strength of a zirconia-reinforced ceramic to composite resin. Braz Oral Res 2007;21:10-5.
• Atsu SS, Kilicarslan MA, Kucukesmen HC, Aka PS. Effect of zirconium-oxide ceramic surface treatments on the bond strength to adhesive resin J Prosthet Dent 2006;95:430-6.
• Matinlinna JP, Vallittu PK. Bonding of resin composites to etchable ceramic surfaces-an insight review of the chemical aspects on surface conditioning. J Oral Rehabil 2007;34:622-30.
• Valandro LF, Ozcan M, Amaral R, Vanderlei A, Bottino MA. Effect of testing methods on the bond strength of resin to zirconia-alumina ceramic: microtensile versus shear test. Dent Mater J 2008;27:849-55.
• Tsukakoshi M, Shinya A, Gomi H, Lassila LV, Vallittu PK, Shinya A. Effects of dental adhesive cement and surface treatment on bond strength and leakage of zirconium oxide ceramics. Dent Mater J 2008;27:159-71.
• Monaco C, Cardelli P, Scotti R, Valandro LF. Pilot evaluation of four experimental conditioning treatments to improve the bond strength between resin cement and Y-TZP ceramic. J Prosthodont 2011;20:97-100.
• Chen L, Suh BI. Bonding of resin materials to all-ceramics: a review. Curr Res Dent 2012;3:7-17.
• Chen L, Suh BI, Kim J, Tay FR. Evaluation of silica coating techniques for zirconia bonding. Am J Dent 2011;24:79-84.
• Nishigawa G, Maruo Y, Irie M, Oka M, Yoshihara K, Minagi S, et al. Ultrasonic cleaning of silica-coated zirconia influences bond strength between zirconia and resin luting material. Dent Mater J 2008;27:842-8.
• Lung H, Kukk E, Matinlinna JP. Shear bond strength between resin and zirconia with two different silane blends. Acta Odontol Scand 2012;70:405-13.
• Matinlinna JP, Lassila LV. Enhanced resin-composite bonding to zirconia framework after pretreatment with selected silane monomers. Dent Mater 2011;27:273-80.
• Uo M, Sjögren G, Sundh A, Goto M, Watari F, Bergman M. Effect of surface condition of dental zirconia ceramic (Denzir) on bonding. Dent Mater J 2006;25:626-31.
• Yoshida K, Taira Y, Matsumura H, Atsuta M. Effect of adhesive metal primers on bonding a prosthetic composite resin to metal. J Prosthet Dent 1993;69:357-62.
• Kitayama S, Nikaido T, Takahashi R, Zhu L, Ikeda M, Foxton RM, et al. Effect of primer treatment on bonding of resin cements to zirconia ceramic. Dent Mater 2010;26:426-32.
• Tanaka RA, Fujishima Y, Shibata Y, Manabe A, Miyazaki Y. Cooperation of phosphate monomer and silica modification on zirconia. J Dent Res 2008;87:666-70.
• Wegner SM, Kern M. Long-term resin bond strength to zirconia ceramic. J Adhes Dent 2000;2:139-47.
• Tsuo Y, Yoshida K, Atsuta M. Effects of alumina-blasting and adhesive primers on bonding between resin luting agent and zirconia ceramics. Dent Mater J 2006;25:669-74.
• Ernst CP, Cohnen U, Stender E, Willershausen B. In vitro retentive strength of zirconium oxide ceramic crowns using different luting agents. J Prosthet Dent 2005;93:551-8.
• Dias de Souza GM, Thompson VP, Braga RR. Effect of metal primers on microtensile bond strength between zirconia and resin cements. J Prosthet Dent 2011;105:296-303.
• Piascik JR, Swift EJ, Thompson JY, Grego S, Stoner BR. Surface modification for enhanced silanation of zirconia ceramics. Dent Mater 2009;25:1116-21.
• Casucci A, Mazzitelli C, Monticelli F, Toledano, M, Osorio R, Osorio E, et al. Morphological analysis of three zirconium oxide ceramics: effect of surface treatments. Dent Mater 2010;26:751-60.
• Casucci A, Osorio E, Osorio R, Monticelli F, Toledano M, Mazzitelli C, et al. Influence of different surface treatments on surface zirconia frameworks. J Dent 2009;37: 891-7.
• Cassucci A, Monticelli F, Goracci C, Mazzitelli C, Cantoro A, Papacchini F, et al. Effect of surface pre-treatments on the zirconia ceramicresin cement microtensile bond strength. Dent Mater 2011;27:1024-30.
• Aboushelib MN, Kleverlaan CJ, Feilzer AJ. Selective infiltration-etching technique for a strong and durable bond of resin cements to zirconia-based materials. J Prosthet Dent 2007;98:379-88.
• Aboushelib MN, Feilzer AJ, Kleverlaan CJ. Bonding to zirconia using a new surface treatment. J Prosthodont 2010;19:340-6.
• Dunn WJ, Davis JT, Bush AC. Shear bond strength and SEM evaluation of composite bonded to Er:YAG laser-prepared dentin and enamel. Dent Mater 2005;21:616-24.
• Spohr AM, Borges GA, Júnior LH, Mota EG, Oshima HMS. Surface modification of In-Ceram Zirconia ceramic by Nd:YAG laser, Rocatec system, or aluminum oxide sandblasting and its bond strength to aresin cement. Photomed Laser Surg 2008,26:203-8.
• Ersu B, Yuzugullu B, Ruya Yazici A, Canay S. Surface roughness and bond strengths of glass-infiltrated alumina-ceramics prepared using various surface treatments. J Dent 2009;37:848-56.
• Cavalcanti AN, Pilecki P, Foxton RM, Watson TF, Oliveira MT, Gianinni M, et al. Evaluation of the surface roughness and morphologic features of Y-TZP ceramics after different surface treatments. Photomed Laser Surg 2009;27:473-9.
• Foxton RM, Cavalcanti AN, Nakajima M, Pilecki P, Sherriff M, Melo L, et al. Durability of resin cement bond to aluminum oxide zirconia ceramics after air abrasion and laser treatment. J Prosthodont 2011;20:84-92.
• Akyil MS, Yilmaz A, Karaalioğlu OF, Duymuş ZY. Shear bond strength of repair composite resin to an acid-etched and a laser-irradiated feldspathic ceramic surface. Photomed Laser Surg 2010;28:539- 45.
• Piascik JR, Wolter SD, Stoner BR. Development of a novel surface modification for improved bonding to zirconia. Dent Mater 2011;27:e99-105.
• Piascik JR, Wolter SD, Stoner BR. Enhanced bonding between YSZ surfaces using a gas-phase fluorination pretreatment. J Biomed Mater Res B Appl Biomater 2011;98:114-9.