Effect Of Different Bleaching Methods On The Colour Change And Surface Properties

Yıl 2024, Cilt: 41 Sayı: 1, 1 - 8, 03.01.2024

Işıl Turp , İlkin Tuncel , Volkan Turp , Aslihan Usumez

https://doi.org/10.17214/gaziaot.1218514

Öz

Objective: The aim of the current study was to investigate the effect of bleaching of 40% hydrogen peroxide without any light activation, with LED light activation or with Er:YAG laser activation on colour change, surface microhardness and surface roughness.
Materials and Method: Third molar teeth were used in the study. Their enamel surfaces were flattened with sandpaper up to 2200 grit after they were embedded in acrylic resin. One control and three experimantal groups were evaluated. The experimental groups were the group bleaching gel was applied without any light activation (Group J), the group bleaching gel was activated with LED light source with a wavelength of 385-515 nm and power of 3200 mW/cm2 (Group LED) and the group bleaching gel was activated with Er:YAG laser in the VLP mode (1000 µs pulse time) with 50 mJ energy and 10 Hz frequency (Group Er:YAG). Colour was measured before and after bleaching and the difference (∆E00) was calculated using the CIEDE2000 formula. The microhardness of the specimens were measured after 980 g load application for 15 s and the surface roughness was measured with a contact-type profilometer after storage in artificial saliva for one week. Statistical analysis was carried out with Oneway ANOVA test.
Results: In all bleaching groups, the color change was found to be above the visual detection threshold, but there was no significant difference between the groups. (p>0.05). There wasn’t also any statistically significant difference in microhardness and surface roughness between the groups (p>0.05).
Conclusion: The surface properties of the enamel one week after bleaching didn’t differ from non-bleached enamel.

Anahtar Kelimeler

LED, colour change, Er:YAG laser, in-office bleaching, microhardness, roughness

Proje Numarası

12-2014/32

Farklı Diş Beyazlatma Yöntemlerinin Dişlerde Renk Değişimi ve Yüzey Özelliklerine Etkileri

Öz

Amaç: Işık ile aktive edilmeden, LED ışık kaynağı ile ve Er: YAG lazer ile aktive edilen %40 konsantrasyondaki hidrojen peroksit (HP) beyazlatma jeli ile beyazlatma işleminin renk değişikliğine, yüzeyin mikrosertlik ve pürüzlülük özelliklerine olan etkilerini incelemektir.
Gereç ve Yöntem: Çalışmada çekilmiş sağlıklı üçüncü büyük azı dişleri kullanılmıştır. Akrilik bloklara gömülen dişler 2200 grit’e kadar zımpara ile zımparalanarak minede düz yüzeyler elde edilmiştir. Biri kontrol grubu (Grup K) olmak üzere toplam dört grup değerlendirilmiştir. Bunlar; aktivasyon yapılmaksızın beyazlatma jeli uygulanan grup (Grup J), 385-515 nm dalga boyunda ve 3200 mW/cm2 güçte ışık üreten LED ışık kaynağı ile beyazlatma yapılan grup (Grup LED) ve 50 mJ enerji ile10 Hz’de ve VLP modunda (1000 µs atım süresi) ile kullanılan Er:YAG lazer ile aktivasyon yapılan gruptur (Grup Er:YAG). Beyazlatma işleminin öncesinde ve sonrasında spektrofotometre ile renk ölçümü yapılmış ve renk değişimi (∆E00) CIEDE2000 formülü ile hesaplanmıştır. Bir hafta örnekler yapay tükürük içerisinde bekletildikten sonra 980 g yük 15 s boyunca uygulanarak mikrosertlik ölçümleri ve kontakt tipi bir profilometre ile pürüzlülük ölçümleri yapılmıştır. Veriler Oneway ANOVA testi ile değerlendirilmiştir.
Bulgular: Beyazlatma yapılan tüm gruplarda renk değişikliği gözle fark edilebilme eşiğinin üzerinde saptanırken gruplar arası anlamlı farklılık bulunmamıştır. Kontrol grubu ile beyazlatma yapılan gruplarda mikrosertlik ve pürüzlülük değerleri anlamlı bir değişim göstermemiştir.
Sonuç: Beyazlatma işleminden bir hafta sonra diş minesinin yüzey özellikleri beyazlatma yapılmamış mineden farklı değildir.

Anahtar Kelimeler

Ofis tipi beyazlatma, LED, Er:YAG lazer, renk değişimi, mikrosertlik, pürüzlülük

Destekleyen Kurum

Bezmialem Vakıf Üniversiesi Bilimsel Araştırma Projeleri Birimi

Proje Numarası

12-2014/32

Kaynakça

• De Moor RJ, Verheyen J, Diachuk A, Verheyen P, Meire MA, De Coster PJ, et al. Insight in the chemistry of laser-activated dental bleaching. ScientificWorld Journal 2015;650492.
• M’Quillen JH.Bleaching discolored teeth. Dental Cosmos1867;8:457-65.
• Sulieman M, Addy M, Rees JS. Development and evaluation of a method in vitro to study the effectiveness of tooth bleaching. J Dent 2003;31:415-22.
• Joiner A. The bleaching of teeth: a review of the literature. J Dent 2006;34:412-9.
• De Moor RJ, Verheyen J, Verheyen P, Diachuk A, Meire MA, De Coster PJ, et al. Laser teeth bleaching: evaluation of eventual side effects on enamel and the pulp and the efficiency in vitro and in vivo. ScientificWorldJournal 2015;835405.
• McEvoy SA. Chemical agents for removing intrinsic stains from vital teeth. II. Current techniques and their clinical application. Quintessence Int 1989;20:379-84.
• Shahabi S, Assadian H, Mahmoudi Nahavandi A, Nokhbatolfoghahaei H. Comparison of Tooth Color Change After Bleaching With Conventional and Different Light-Activated Methods. J Lasers Med Sci 2018;9:27-31.
• Ergin E, Ruya Yazici A, Kalender B, Usumez A, Ertan A, Gorucu J, et al. In vitro comparison of an Er:YAG laser-activated bleaching system with different light-activated bleaching systems for color change, surface roughness, and enamel bond strength. Lasers Med Sci 2018;33:1913-8.
• Nguyen C, Augros C, Rocca JP, Lagori G, Fornaini C. KTP and Er:YAG laser dental bleaching comparison: a spectrophotometric, thermal and morphologic analysis. Lasers Med Sci 2015;30:2157-64.
• Benetti F, Lemos CAA, de Oliveira Gallinari M, Terayama AM, Briso ALF, de Castilho Jacinto R, et al. Influence of different types of light on the response of the pulp tissue in dental bleaching: a systematic review. Clin Oral Investig 2018;22:1825-37.
• Shannon IL. Fluoride Treatment Programs for High-caries-risk Patients. Clin Prevent Dent 1982;4:11-20.
• Guan YH, Lath DL, Lilley TH, Willmot DR, Marlow I, Brook AH. The measurement of tooth whiteness by image analysis and spectrophotometry: a comparison. J Oral Rehabil 2005;32:7-15.
• Joiner A, Hopkinson I, Deng Y, Westland S. A review of tooth colour and whiteness. J Dent. 2008;36:2-7.
• Surmelioglu D, Yalcin ED, Orhan K. Analysis of enamel structure and mineral density after different bleaching protocols using micro-computed tomography. Acta Odontol Scand 2020;78:618-25.
• Buchalla W, Attin T. External bleaching therapy with activation by heat, light or laser--a systematic review. Dent Mater 2007;23:586-96.
• Gurgan S, Cakir FY, Yazici E. Different light-activated in-office bleaching systems: a clinical evaluation. Lasers Med Sci 2010;25:817-22.
• Zanin F. Recent Advances in Dental Bleaching with Laser and LEDs. Photomed Laser Surg 2016;34:135-6.
• Baik JW, Rueggeberg FA, Liewehr FR. Effect of light-enhanced bleaching on in vitro surface and intrapulpal temperature rise. J Esthet Restor Dent 2001;13:370-8.
• Araujo Fde O, Baratieri LN, Araújo E. In situ study of in-office bleaching procedures using light sources on human enamel microhardness. Oper Dent 2010;35:139-46.
• Pérez Mdel M, Saleh A, Yebra A, Pulgar R. Study of the variation between CIELAB delta E* and CIEDE2000 color-differences of resin composites. Dent Mater J 2007;26:21-8.
• Paravina RD, Ghinea R, Herrera LJ, Bona AD, Igiel C, Linninger M, et al. Color difference thresholds in dentistry. J Esthet Restor Dent 2015;27:1-9.
• Marson FC, Sensi LG, Vieira LC, Araújo E. Clinical evaluation of in-office dental bleaching treatments with and without the use of light-activation sources. Oper Dent 2008;33:15-22.
• Hahn P, Schondelmaier N, Wolkewitz M, Altenburger MJ, Polydorou O. Efficacy of tooth bleaching with and without light activation and its effect on the pulp temperature: an in vitro study. Odontology 2013;101:67-74.
• Mair LH, Stolarski TA, Vowles RW, Lloyd CH. Wear: mechanisms, manifestations and measurement. Report of a workshop. J Dent 1996;24:141-8.
• Featherstone JD, ten Cate JM, Shariati M, Arends J. Comparison of artificial caries-like lesions by quantitative microradiography and microhardness profiles. Caries Res 1983;17:385-91.
• Attin T, Hannig C, Wiegand A, Attin R. Effect of bleaching on restorative materials and restorations--a systematic review. Dent Mater 2004;20:852-61.
• Attin T, Schmidlin PR, Wegehaupt F, Wiegand A. Influence of study design on the impact of bleaching agents on dental enamel microhardness: a review. Dent Mater 2009;25:143-57.
• Coceska E, Gjorgievska E, Coleman NJ, Gabric D, Slipper IJ, Stevanovic M, et al. Enamel alteration following tooth bleaching and remineralization. J Microsc 2016;262:232-44.
• Parreiras SO, Vianna P, Kossatz S, Loguercio AD, Reis A. Effects of light activated in-office bleaching on permeability, microhardness, and mineral content of enamel. Oper Dent 2014;39:E225-30.
• Marcondes M, Paranhos MP, Spohr AM, Mota EG, da Silva IN, Souto AA, et al. The influence of the Nd:YAG laser bleaching on physical and mechanical properties of the dental enamel. J Biomed Mater Res B Appl Biomater 2009;90:388-95.
• Markovic L, Jordan RA, Lakota N, Gaengler P. Micromorphology of enamel surface after vital tooth bleaching. J Endod 2007;33:607-10.
• Attin T, Müller T, Patyk A, Lennon AM. Influence of different bleaching systems on fracture toughness and hardness of enamel. Oper Dent 2004;29:188-95.
• de Vasconcelos AA, Cunha AG, Borges BC, Vitoriano Jde O, Alves-Júnior C, Machado CT, et al. Enamel properties after tooth bleaching with hydrogen/carbamide peroxides in association with a CPP-ACP paste. Acta Odontol Scand 2012;70:337-43.
• Sasaki RT, Arcanjo AJ, Flório FM, Basting RT. Micromorphology and microhardness of enamel after treatment with home-use bleaching agents containing 10% carbamide peroxide and 7.5% hydrogen peroxide. J Appl Oral Sci 2009;17:611-6.
• Mondelli RF, Azevedo JF, Francisconi PA, Ishikiriama SK, Mondelli J. Wear and surface roughness of bovine enamel submitted to bleaching. Eur J Esthet Dent 2009;4:396-403.
• Ourique SA, Arrais CA, Cassoni A, Ota-Tsuzuki C, Rodrigues JA. Effects of different concentrations of carbamide peroxide and bleaching periods on the roughness of dental ceramics. Braz Oral Res 2011;25:453-8.
• Domínguez A, García JA, Costela A, Gómez C. Influence of the light source and bleaching gel on the efficacy of the tooth whitening process. Photomed Laser Surg 2011;29:53-9.
• Sa Y, Chen D, Liu Y, Wen W, Xu M, Jiang T, et al. Effects of two in-office bleaching agents with different pH values on enamel surface structure and color: an in situ vs. in vitro study. J Dent 2012;40:e26-34.
• Sun L, Liang S, Sa Y, Wang Z, Ma X, Jiang T, et al. Surface alteration of human tooth enamel subjected to acidic and neutral 30% hydrogen peroxide. J Dent 2011;39:686-92.
• Worschech CC, Rodrigues JA, Martins LR, Ambrosano GM. Brushing effect of abrasive dentifrices during at-home bleaching with 10% carbamide peroxide on enamel surface roughness. J Contemp Dent Pract 2006;7:25-34.