Islak öğütme yöntemi ile metalik demir ve kobalttan hazırlanmış CoFe2O4 nanoyapılarda doyum manyetizasyonunun yapıya bağlı değişimi

Öz

Nano-kristal kobalt-ferrit örnekler ıslak mekanik öğütme/tavlama yöntemi ile metalik demir ve kobalt kullanılarak hazırlanmıştır. 750 C de tavlanan örnekler, 12 saate kadar kuru öğütme yapılarak, öğütme süresinin yapısal ve manyetik özelliklere etkisi irdelenmiştir. Örneklerin ortalama kristalit büyüklükleri x-ışını toz difraksiyon desenlerinden Rietveld analiz programı (MaudLab) yardımıyla hesaplanmıştır. Sonuçlar tavlanmış örnekte kristalite büyüklüğünün 60 nm olduğunu ve 12 saat kuru öğütmeyle birlikte 12 nm’ye kadar düştüğünü göstermektedir. Ancak örneklerin geçirmeli elektron mikroskobu (TEM) görüntülerinde birleşmeler olmuş nano-kristalitler gözlenmiştir. Rietveld analizleri ayrıca kuru öğütme sırasında oluşan kristal kusurları nedeniyle örneklerdeki mikro-gerilmenin 12 saat kuru öğütmeyle berber 2 x 10^-4‘den 1.4 x 10^-3’e çıktığı hesaplanmıştır. Co+2 iyonları için elektron bağlanma enerjileri x-ışını foto-elektron tayf-ölçümü (XPS) ile belirlenerek, inversiyon katsayıları belirlenmiş ve hacim başına düşen manyetik momentleri hesaplanmıştır. Hesaplanan hacim başına düşen manyetik momentleri öğütme ile birlikte 4.87 µ_B’dan 6.17 µ_B’a artarken, oda sıcaklığı titreşimli örnek manyetometresi (VSM) ölçümleri öğütme süresi arttıkça doyum manyetizasyonunun 125 emu g^-1’dan 57 emu g^-1’e düştüğünü göstermiştir.

Anahtar Kelimeler

• Kobalt-ferrit,ıslak öğütme; manyetik özellikler; nanokristalit

Kaynakça

1. Fujiwara T, Barium Ferrite Media for perpendicular Recording, IEEE T Magn, 21 (1985) 1480-1485
2. Pankhurst Q.A., Connolly J., Jones S. K., Dobson J., Applications of magnetic nanoparticles in biomedicine, J. Phys. D: Appl. Phys. 36 (2003) R167–R181
3. Tirosh E, Shemer G, Markovich G 2006 Optimizing cobalt ferrite nanocrystal synthesis using a magneto-optical probe Chem. Matter. 18 465-70
4. Yen S. K., Padmanabhan P., Selvan S. T., Multifunctional Iron Oxide Nanoparticles for Diagnostics, Therapy and Macromolecule Delivery, Theranostics, 3 (2013) 986–1003
5. Tartaj P., Nanomagnets-from Fundamentals physics to biomedicine, Curr. Nanosci. 2 (2006) 43-53
6. Pankhurst Q A, Connoly J, Jones S K, Dobson J, Applications of magnetic nanoparticles in biomedicine J. Phys. D: Appl. Phys. 36 (2003) R167-81
7. Ramos A. V., Room temperature spin filtering in epitaxial cobalt-ferrite tunnel barriers Appl. Phys. Lett. 91 (2007) 122107.
8. Giri A.K. , Photomagnetism and structure in cobalt ferrite nanoparticles, Appl. Phys. Lett. 80 (2002) 2341

9. Martens J.W.D., Peeters W.L., Van Noort H.M., Errnan M., Optical, magneto-optical and mössbauer spectroscopy on Co3+ substituted cobalt ferrite Co2+Fe2−xCo3+xO4(0 ⩽ x ⩽ 2), J. Phys. Chem. Solids 46 (1985) 411-416
10. Okuno S.N., Hashimoto S., Inomata K., Preferred crystal orientation of cobalt ferrite thin films induced by ion bombardment during deposition, J. Appl. Phys. 71 (1992) 5926
11. Evtihiev N.N., Economov N.A., Krebs A.R., Zamjatina N.A., Co-ferrite New magnetooptic recording material, IEEE Trans. Magn. 12 (1976), 773
12. Valenzuela R., Magnetic Ceramics, Cambridge University Press, Cambridge (1994)
13. Patil K. C., Manoharan S. S., Gajapathy D., Cheremisino N.P., Handbook of Ceramics and Composites, Synthesis and Properties vol. 1, Marcel Dekker Inc., New York (1990)
14. Costa A.C.F.M., Ni–Zn–Sm nanopowder ferrites: Morphological aspects and magnetic properties, J. Magn. Magn. Mater. 320 (2008) 742
15. Cullity B. D., Introduction to Magnetic Materials, Wiley, New Jersey (2009)
16. Haneda K, Morrish A.H., Noncollinear magnetic structure of CoFe2O4 small particles, J. Appl. Phys. 63 (1988) 4258
17. Goodenough J.B., Loeb A.L., Theory of Ionic Ordering, Crystal Distortion, and Magnetic Exchange Due to Covalent Forces in Spinels, Phys. Rev. 98 (1955) 391
18. Chinnasamy C.N., Mixed spinel structure in nanocrystalline NiFe2O4, Phys. Rev. B, 63 (2001) 184108
19. Sebastian M. D. J., Rudraswamy B., Radhakrishna M.C., Mössbauer effect studies and X-ray diffraction analysis of cobalt ferrite prepared in powder form by thermal decomposition method, Bull. Mater. Sci., 26 (2003) 509–515
20. Maaz K., Mumtaz A., Hasanain S. K., Ceylan A., Synthesis and magnetic properties of cobalt ferrite (CoFe2O4) nanoparticles prepared by wet chemical route J. Magn. Magn. Mater. 308 (2007) 289-295
21. Hanh H., Quy O.K., Thuy N.P., Tung L.D., Spinu L., Synthesis of cobalt ferrite nanocrystallites by the forced hydrolysis method and investigation of their magnetic properties Physica B 327 (2003) 382–384
22. Thang P. D., Rijnders G., Dave H.A. Blank Spinel cobalt ferrite by complexometric synthesis J. Magn. Magn. Mater 295 (2005) 251–256
23. Bensebaa N, Alleg S., Greneche J.M., Phase transformations of mechanically alloyed Fe–Cr–P–C powders J. Alloys Compd. 393 (2005) 194
24. Zhang B., Li Z.Q., Synthesis of vanadium carbide by mechanical alloying J. Alloys Compd. 392 (2005) 214
25. Rico M. M., Greneche J. M., Alcazar G. A. P., Effect of boron on structural and magnetic properties of the Fe60Al40 system prepared by mechanical alloying J. Alloys Compd., 398 (2005) 26-32
26. Vijay R., Sundaresan R., Maiya M.P., Murthy S.S., Comparative evaluation of Mg–Ni hydrogen absorbing materials prepared by mechanical alloying Int. J. Hydrogen Energy 30 (2005) 501
27. Varin R.A., Chiu Ch., Structural stability of sodium borohydride (NaBH4) during controlled mechanical milling J. Alloys Compd. 397 (2005) 276–281
28. Poleti D., Karanovic L., Zdujic M., Jovalekic C., Brankovic Z., Mechanochemical synthesis of γ-Bi2O3 Solid State Sci. 6 (2004) 239
29. Tsuzuki T., McCormick P., ZnO nanoparticles synthesised by mechanochemical processing Scripta Mater. 44 (2001) 1731
30. Janot R., Guerard D., One-step synthesis of maghemite nanometric powders by ball-milling J. Alloys Co mpd. 333 (2002) 302
31. Ozcan S., Kaynar, M. B., Can M. M., Fırat T., Mat. Sci and Eng. B 121 (2005) 278–281
32. Şimşek T., Akansel S., Özcan Ş., Ceylan A., Synthesis of MnFe2O4 nanocrystals by wet-milling under atmospheric conditions, Cer. Int. 40(2014) 7953–7956
33. Avar B., Ozcan Ş., Structural evolutions in Ti and TiO2 powders by ball milling and subsequent heat-treatments Cer Int 40 (2014) 11123–11130
34. Kaynar M. B., Özcan Ş., Shah S. I., Synthesis and magnetic properties of nanocrystalline BaFe12O19 Cer Int 41 (2015) 11257–11263
35. Eshraghi M., Kameli P., Magnetic properties of CoFe2O4 nanoparticles prepared by thermal treatment of ball-milled precursors Current Applied Physics 11 (2011) 476-481
36. Sani R., Beitollahi A., Maksimov Y. V., Suzdalev I. P., Synthesis, phase formation study and magnetic properties of CoFe2O4 nanopowder prepared by mechanical milling J Mater Sci 42 (2007) 2126–2131
37. Manova E., Kunev B., Paneva D., Mitov I., Petrov L., Mechano-Synthesis, Characterization, and Magnetic Properties of Nanoparticles of Cobalt Ferrite, CoFe2O4 Chem. Mater. 16 (2004) 5689-5696
38. Šepelák V., Baabe D., Litterst F.J., Becker K.D., Structural disorder in the high-energy milled magnesium ferrite J. Applied Physics, 88 (2000), p. 5884
39. Cedeño-Mattei Y., Perales-Perez O., Uwakweh O. N.C., Show more Effect of high-energy ball milling time on structural and magnetic properties of nanocrystalline cobalt ferrite powders, J. Magn. Magn. Mater, 341 (2013) 17–24
40. Wang W. P., Yang H., Xian T., Jiang J. L., XPS and Magnetic Properties of CoFe2O4 Nanoparticles Synthesized by a Polyacrylamide Gel Route, Mater Trans 53, (2012) 1586-1589
41. Wang J., Sun J., Sun Q., Chen Q., One-step hydrothermal process to prepare highly crystalline Fe3O4 nanoparticles with improved magnetic properties, Mater. Res. Bull. 38, 1113-1118 (2003)
42. Lyubutin I.S., Canted spin structure and the first order magnetic transition in CoFe2O4 nanoparticles coated by amorphous silica J. Magn. Magn. Mater, 415 (2016) 13-19
43. Peddis D., Interparticle Interactions and Magnetic Anisotropy in Cobalt Ferrite Nanoparticles: Influence of Molecular Coating Chem. Mater. (24) 2012, 1062−1071