ATIK CAM ve YÜKSEK FIRIN CÜRUFU KATKILI HARÇLARIN ÖZELLİKLERİ

Öz

Bu çalışmada, bağlayıcı olarak öğütülmüş atık şişe camlar ve endüstriyel yan ürünler içeren harçların özellikleriaraştırılmıştır. Bu amaçla, iki farklı renkte camın tek başlarına ve cama ilaveten yüksek fırın cürufu’nun çimentoile çeşitli oranlarda yer değiştirmesi suretiyle oluşturulan harç numuneleri üretilmiştir. Numunelerin basınçdayanımı, NaCl, Na2SO4, MgSO4 ve yüksek sıcaklığa karşı dayanıklılıkları araştırılmıştır. Ayrıca ASR yönündengenleşme ölçümleri yapılmıştır. Basınç dayanımında % 10 renksiz cam-yüksek fırın cürufu yer değiştirmesindeen yüksek sonuç elde edilmiştir. Diğer dayanıklılık deneylerinde ise bütün yer değiştirme oranlarında referanstanyüksek sonuçlar elde edilmiştir.

Anahtar Kelimeler

• Atık camlar, yüksek fırın cürufu, basınç dayanımı, dayanıklılık.

Kaynakça

1. Shayan, A. ve Xu, A., “Value-added Utilization of
2. Waste Glass in Concrete”. Cement ve Concrete
3. Research, Cilt 34, 81-89, 2004.
4. Topçu, İ.B. ve Canbaz, M., “Properties of Concrete
5. Containing Waste Glass”, Cement and Concrete
6. Research, Cilt 34, 267–274, 2004.
7. Park, S.B. ve Lee, B.C., “Studies on Expansion
8. Properties in Mortar Containing Waste Glass and

9. Fibers”, Cement and Concrete Research, Cilt
10. , 1145–1152, 2004.
11. Refined, J., “Development of Non-Traditional Glass
12. Markets”, Resource Recycling, 18– 21. 1998.
13. Uchiyama, J., “Long-term Utilization of the Glass
14. Reasphalt Pavement”. Pavement, 3– 89, 1998.
15. Swamy, R.N., The Alkali– Silica Reaction in
16. Concrete, Van Nostrand Reinhold, New York, 1992.
17. Naohiro, S., “The Strength Characteristics of Mortar
18. Containing Glass Powder”, The 49th Cement Technology
19. Symposium, JCA, Tokyo, 114–119, 1995.
20. Shao, Y., Lefort, T., Moras, S. ve Domian, R.,
21. “Studies on Concrete Ground Waste Glass”, Cement
22. and Concrete Research, Cilt 30, 91-100, 2000.
23. Kozlova, S., Millrath, K., Meyer, C. ve Shimanovich,
24. S., “A Suggested Screening Test for ASR in
25. Cement-Bound Composites Containing Glass
26. Aggregate based on Autoclaving” Cement and
27. Concrete Composites, Cilt 26, 827–835, 2004.
28. Shi, C. ve Day, R. L., “Early Strength Development
29. and Hydration of Alkali-Activated Blast Furnace
30. Slag/Fly Ash Blends”, Advances in Cement
31. Research, Cilt 11, No 4, 189-196, 1999.
32. Shi C., Day R. L., Wu X. ve Tang M., “Comparison
33. of the Microstructure and Performance of Alkali-
34. Slag and Portlant Cement Pastes”, Proceedings of
35. the 9th International Congress on the Chemistry
36. of Cement, New Delhi, 3, 298-304, 1992.
37. Malolepszy J. ve Petri M., “High Strength Slag-
38. Alkaline Binders” Proceedings of the 8th International
39. Congress on the Chemistry of Cements,
40. Brazil, 4, 108-111, 1986.
41. Douglas E. ve Brvestetr J. A., “Preliminary Study
42. on the Alkali Activation of Granulated Blast
43. Furnace Slag”, Cement and Concrete Research,
44. Cilt 20, No 5, 746-756, 1990.
45. Torii, K. ve Kawamura, M., “Effects of Fly Ash
46. And Silica Fume on the Resistance of Mortar to
47. Sulfuric Acid and Sulfate Attack”, Cement and
48. Concrete Research, Cilt 24, 361-370, 1994.
49. Mangat, P.S. ve Khatib, J.M., “Influence of Fly
50. Ash, Silica Fume, and Slag on Sulfate Resistance
51. of Concrete”, ACI Materials Journal, Cilt 92,
52. -552, 1995.
53. Wild, S., Khatib, J.M. and O'Farrell, M., “Sulphate
54. Resistance of Mortar, Containing Ground Brick
55. Clay Calcined at Different Temperatures”, Cement
56. and Concrete Research, Cilt 27, No 5, 697-709, 1997.
57. Neville, A.M., Properties of Concrete, Final
58. edition, Longman Ltd. England, 1997.
59. Mehta, P.K. ve Monteiro, P.J.M., Concrete, Microstructure,
60. Properties and Materials, 154-159,
61. Prentice-Hall, Englewood Cliffs, New Jersey, 1997.
62. Biricik, H., Aköz, F., Türker, F. ve Berktay, I.,
63. Resistance to Magnesium Sulfate and Sodium
64. Sulfate Attack of Mortars Containing Wheat Straw
65. Ash”, Cement and Concrete Research, Cilt 30,
66. -1197, 2000.
67. Binici, H. ve Aksoğan, O., “Sulfate Resistance of
68. Plain and Blended Cement”, Cement And Concrete
69. Composites, Cilt 28, 39–46, 2006.
70. TS- EN-197-1, Compositions and Conformity
71. Criteria for Common Cements, Turkish Standards
72. Institution, Ankara, 2002.
73. TS- EN-196-1, Methods of Testing Cements-
74. Determination of Strength, Turkish Standards
75. Institution, Ankara, 2002.
76. ASTM C 1260, 1994, Standart Test Method for
77. Potential Alkali Reactivity of Aggregate, ASTM
78. Standarts, Philadelphia.
79. Park, S.B., Lee, B.C. ve Kim, J.H., “Studies on
80. Mechanical Properties of Concrete Containing Waste
81. Glass Aggregate” 9th Annual International Conf.
82. on Composites Engineering, in: D. Hui (Ed.),
83. Sponsored by International Community for Composite
84. Engineering and College of Engineering, Univ. of
85. New Orleans, California, 603–604, 2002.
86. Moranville-Regourd, M., “Cements Made from
87. Blast-Furnace Slag”, Lea’s Chemistry of Cement
88. and Concrete Ed. P.C, 633–674, 1998.
89. Gollop, R.S. ve Taylor, H.F.W., “Microstructural
90. and Microanalytical Studies of Sulfate Attack”,
91. Cement and Concrete Research, Cilt 22, 1027-
92. , 1992.
93. Özkan, Ö., “Çelikhane ve Yüksek Fırın Cürufu
94. Katkılı Portlant Çimentosunun Özellikleri”, Teknik
95. Dergi, (Yayında)
96. Savva, A., Manita, P. ve Sideris, K.K. “Influence
97. of Elevated Temperatures on the Mechanical
98. Properties of Blended Cement Concretes Prepared
99. with Limestone and Siliceous Aggregates”, Cement
100. and Concrete Composites, Cilt 27, 239–248, 2005.
101. Yüzer, N., Aköz, F. ve Dokuzer Öztürk L.,
102. “Compressive Strength–Color Change Relation in
103. Mortars at High Temperature”, Cement and
104. Concrete Research, Cilt 34, 1803–1807, 2004.
105. Castillo C. ve Durrani AJ., “Effect of Transient High
106. Temperature on High Strength Concrete”, ACI
107. Materials Journal, Cilt 87, No 1, 47–53, 1990.
108. Xu, Y. ve Chung, D.D.L., “Effect of Sand Addition
109. on the Specific Heat and Thermal Conductivity of
110. Cement”, Cement and Concrete Research, Cilt
111. , 59-61, 2000.
112. Cülfik, M.S. ve Özturan, T., “Effect of Elevated
113. Temperatures on the Residual Mechanical Properties
114. of High-Performance Mortar”, Cement and Concrete
115. Research, Cilt 32, 809-816, 2002.