TAM ZAMANINDA ÜRETİM SİSTEMİNDE BAKIM POLİTİKALARININ ETKİSİ

Öz

Tam Zamanında Üretim (TZÜ) sisteminde ara stok seviyesi düşük olduğu için makine arızaları sisteminverimliliği üzerinde büyük bir etkiye sahiptir. Bu nedenle bu çalışmada, tek ürünlü, çok hatlı ve çok aşamalı birTZÜ sisteminde düzeltici ve koruyucu bakım politikalarının, kanban sayısının ve makinelerin arızalar arasıortalama sürelerinin etkisi benzetim tekniği kullanılarak incelenmiştir. Sistemde izin verilen kanban sayısı,arızalar arası ortalama süre ve koruyucu bakım politikaları dikkate alınarak yapılan bu deney tasarımı uyarınca,hangi koşullarda hangi bakım politikalarının performans ölçütleri üzerinde etkisi olduğu ayrıca incelenmiştir.

Anahtar Kelimeler

• Tam zamanında üretim, bakım politikası, düzeltici bakım, koruyucu bakım.

Kaynakça

1. Monden, Y., Toyota Production System, Practical
2. Approach to Production Management, Institue
3. of Industrial Engineering, Norcross, GA, 1983.
4. Schonberger, R.J., “Japanese Manufacturing Techniques:
5. Nine Hidden Lessons in Simplicity”, The
6. Free Press, NewYork, 1982.
7. Hall, R.W., Zero Inventories, Business One Irwin,
8. Homewood, IL, 1983.

9. Im, J.H., “Lessons from Japanese Production
10. Management”, Production and Inventory Management,
11. Cilt 30, 25-29, 1989.
12. Sohal, A.S., Keller, A.Z., and Fouad, R.H., “A
13. Review of Literature Relating to JIT”, International
14. Journal of Operation and Production Management,
15. Cilt 9, 15-25, 1988.
16. Huang, P.Y., Houck, B.L.W., “Cellular Manufacturing;
17. an Overview and Bibliography”, Production and
18. Inventory Management, Cilt 26, 83-93, 1985.
19. Trevelen, M., “A Review of the Dual Resource
20. Constrained Systems Research”, IIE Transactions,
21. Cilt 21, 279-287, 1989.
22. Golhar, D.Y., Stamm, C.L., “The Just in Time
23. Philosophy: A Literature Review”, International
24. Journal of Production Research, Cilt 29, Sayı 4,
25. -676, 1991.
26. Philipoom, P.R., Rees, L.P., Taylor, B.W., Huang,
27. P.Y., “An Investigation of the Factors Influencing
28. the Number of Kanbans Required in the Implementation
29. of the JIT Technique with Kanbans”,
30. International Journal of Production Research,
31. Cilt 25, Sayı 1, 457-472, 1987.
32. Huang, P.Y., Rees, L.P., Taylor, R.W., “A Simulation
33. Analysis of the Japanese Just-In-Time Technique
34. (with kanbans) for Multi-Line, Multi-Stage Production
35. Systems”, Decision Sicences, Cilt 14, 326-344, 1983.
36. Sarker, B.R., Harris, R.D., “The Effect of
37. Imbalance in A Just-In-Time Production System:
38. A Simulation Study”, International Journal of
39. Production Research, Cilt 26, Sayı 1, 1-18, 1988.
40. Sarker, B.R., “Simulating A Just-In-Time System”,
41. Computers and Industrial Engineering, Cilt 16,
42. Sayı 1, 127-137, 1989.
43. Sarker, B.R., Fitzsimmons, J.A., “The Performance
44. of Push and Pull Systems: A Simulation and Comparative
45. Study”, International Journal of Production
46. Research, Cilt 27, Sayı 1, 1715-1731, 1989.
47. Sarker, B.R., “Service Time Distributions and the
48. Performance of A Pull System: A Simulation
49. Study”, Production Planning and Control, Cilt 2,
50. Sayı 1, 36-43, 1991.
51. Erol, S., Baykoç, Ö.F., Erol, Y., “Bir JIT Üretim
52. Sisteminin Performansını İyileyen Üretim Büyüklüklerinin
53. Belirlenmesi”, G.Ü. Fen Bilimleri Dergisi,
54. Cilt 9, Sayı 3, 489-502, 1996.
55. Baykoç, Ö.F., Erol, S., “Simulation Modelling and
56. Analysis of a JIT Production System”, International
57. Journal of Production Economics, Cilt 55, 203-
58. , 1998.
59. Dengiz, B., Akbay, K., “Computer Simulation of a
60. PCB Production Line: A Simulation Metamodeling
61. Approach”, International Journal of Production
62. Economics, Cilt 63, 195-205, 2000.
63. Alabaş, Ç., Altıparmak, F., Dengiz, B., “A Comparison
64. of the Performance of Artificial Intelligence Techniques
65. for Optimizing the Number of Kanbans”,
66. Journal of the Operational Research Society,
67. Cilt 53, 907-914, 2002.
68. Tajiri, M., Gotoh, F., TPM Implementation: A
69. Japanese Approach, McGraw-Hill, NewYork, 1992.
70. Corder, A.S., Maintenance Management Techniques,
71. McGraw-Hill, 1976.
72. Albino, V., Gianni, C., Okogbaa, O.G., “Maintenance
73. Policisies in Just In Time Manufacturing Lines”,
74. International Journal of Production Research,
75. Cilt 30, Sayı 2, 369-382, 1992.
76. Abdulnour, G., Dudek, R.A., Smith, M.L., “Effect
77. of the Maintenance Policies on the Just In Time
78. Production Systems”, International Journal of
79. Production Research, Cilt 33, Sayı 2, 565-583, 1995.
80. Savsar, M., “Simulation Analysis of Maintenance
81. Policies in Just In Time Production Systems”,
82. International Journal of Operation and Production
83. Management, Cilt 17, Sayı 3, 256-266, 1997.
84. Azadivar, F., Shu, V., “Maintenance Policy
85. Selection for JIT Production Systems”, International
86. Journal of Production Research, Cilt 37,
87. Sayı 16, 3725-3738, 1999.
88. Flynn,B.B., “An Investigation of Critical Machines
89. Preventive Maintenance Policies For Group
90. Technology”, Proceedings of the 1987 Decision
91. Science Institute, Boston, M.A., 747-749, 1987.
92. Banerjee, A., Flynn, B.B., “A Simulation Study of
93. Some Maintenance Policies in a Group Technology
94. Shop”, International Journal of Production
95. Research, Cilt 25, Sayı 11, 1595-1609, 1987.
96. Vineyard, M.L., Meredith, J.R., “Effect of Maintenance
97. Policies on FMS Failures”, International
98. Journal of Production Research, Cilt 30, 2647-
99. , 1992.
100. Vineyard, M.L., Gaympah, K.A., Meredith, J.R.,
101. “An Evaluation of Maintenance Policies for
102. Flexible Manufacturing Systems: A Case Study”,
103. International Journal of Operation and Production
104. Management, Cilt 20, Sayı 4, 409-426, 2000.
105. Savsar, M., “Modeling and Analysis of A Flexible
106. Manufacturing Cell”, Proceedings of the 22nd
107. International Conference on Computers and
108. Industrial Engineering, 184-187, 1997b.
109. Savsar, M., “Reliability Analysis of A Flexible
110. Manufacturing Cell”, Reliability Engineering and
111. System Safety, Cilt 67, Sayı 2, 147-152, 2000.
112. Savsar, M., “Performance Analysis of An FMS
113. Operating Under Different Failure Rates and
114. Maintenance Policies”, International Journal of
115. Flexible Manufacturing Systems, Cilt 16, Sayı 3,
116. -249, 2005.
117. Kobbacy, K.A.H., “The Use of Knowledge-Based
118. Systems in Evaluation and Enhancement of
119. Maintenance Routines”, International Journal of
120. Production Economics, Cilt 24, 243-248, 1992.
121. Ulusoy, G., Or, I, Soydan, N., “Design and Implementation
122. of A Maintenance Planning and Control
123. System”, International Journal of Production
124. Economics, Cilt 24, 263-272, 1992.